ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WR512-3GN-4M.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "WR512-3GN", "ralink,rt3052-soc";
7 model = "WR512-3GN-like router";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x3c8000>;
48 };
49 };
50
51 esw@10110000 {
52 ralink,portmap = <0x2f>;
53 };
54
55 gpio-leds {
56 compatible = "gpio-leds";
57 3g {
58 label = "wr512:green:3g";
59 gpios = <&gpio0 9 1>;
60 };
61 gateway {
62 label = "wr512:green:gateway";
63 gpios = <&gpio0 11 1>;
64 };
65 ap {
66 label = "wr512:green:ap";
67 gpios = <&gpio0 12 1>;
68 };
69 wps {
70 label = "wr512:green:wps";
71 gpios = <&gpio0 14 1>;
72 };
73 station {
74 label = "wr512:green:station";
75 gpios = <&gpio0 13 1>;
76 };
77 };
78
79 gpio-keys-polled {
80 compatible = "gpio-keys-polled";
81 #address-cells = <1>;
82 #size-cells = <0>;
83 poll-interval = <20>;
84 reset_wps {
85 label = "reset_wps";
86 gpios = <&gpio0 10 1>;
87 linux,code = <0x198>;
88 };
89 mode {
90 label = "mode";
91 gpios = <&gpio0 7 1>;
92 linux,code = <0x32>;
93 };
94 };
95
96 otg@101c0000 {
97 status = "okay";
98 };
99 };