target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "wrtnode", "ralink,mt7620n-soc";
   7         model = "WRTNODE";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13
  14                 gpio2: gpio@660 {
  15                         status = "okay";
  16                 };
  17
  18                 gpio3: gpio@688 {
  19                         status = "okay";
  20                 };
  21
  22                 spi@b00 {
  23                         status = "okay";
  24
  25                         m25p80@0 {
  26                                 #address-cells = <1>;
  27                                 #size-cells = <1>;
  28                                 compatible = "jedec,spi-nor";
  29                                 reg = <0 0>;
  30                                 linux,modalias = "m25p80", "w25q128";
  31                                 spi-max-frequency = <10000000>;
  32
  33                                 partition@0 {
  34                                         label = "u-boot";
  35                                         reg = <0x0 0x30000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@30000 {
  40                                         label = "u-boot-env";
  41                                         reg = <0x30000 0x10000>;
  42                                         read-only;
  43                                 };
  44
  45                                 factory: partition@40000 {
  46                                         label = "factory";
  47                                         reg = <0x40000 0x10000>;
  48                                         read-only;
  49                                 };
  50
  51                                 partition@50000 {
  52                                         label = "firmware";
  53                                         reg = <0x50000 0xfb0000>;
  54                                 };
  55                         };
  56                 };
  57         };
  58
  59         ehci@101c0000 {
  60                 status = "okay";
  61         };
  62
  63         ohci@101c1000 {
  64                 status = "okay";
  65         };
  66
  67         ethernet@10100000 {
  68                 mtd-mac-address = <&factory 0x4>;
  69                 mediatek,portmap = "wllll";
  70         };
  71
  72         wmac@10180000 {
  73                 ralink,mtd-eeprom = <&factory 0>;
  74         };
  75
  76         pinctrl {
  77                 state_default: pinctrl0 {
  78                         default {
  79                                 ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
  80                                 ralink,function = "gpio";
  81                         };
  82                 };
  83         };
  84
  85         gpio-leds {
  86                 compatible = "gpio-leds";
  87
  88                 indicator {
  89                         label = "wrtnode:blue:indicator";
  90                         gpios = <&gpio1 14 1>;
  91                 };
  92         };
  93 };