target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch

   1 From 225f36695bb07dad9510f9affd79e63f1a44a195 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Sun, 27 Jul 2014 09:52:56 +0100
   4 Subject: [PATCH 52/57] i2c: MIPS: adds ralink I2C driver
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
   9  drivers/i2c/busses/Kconfig                         |    4 +
  10  drivers/i2c/busses/Makefile                        |    1 +
  11  drivers/i2c/busses/i2c-ralink.c                    |  274 ++++++++++++++++++++
  12  4 files changed, 306 insertions(+)
  13  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
  14  create mode 100644 drivers/i2c/busses/i2c-ralink.c
  15
  16 --- /dev/null
  17 +++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
  18 @@ -0,0 +1,27 @@
  19 +I2C for Ralink platforms
  20 +
  21 +Required properties :
  22 +- compatible : Must be "link,rt3052-i2c"
  23 +- reg: physical base address of the controller and length of memory mapped
  24 +     region.
  25 +- #address-cells = <1>;
  26 +- #size-cells = <0>;
  27 +
  28 +Optional properties:
  29 +- Child nodes conforming to i2c bus binding
  30 +
  31 +Example :
  32 +
  33 +palmbus@10000000 {
  34 +       i2c@900 {
  35 +               compatible = "link,rt3052-i2c";
  36 +               reg = <0x900 0x100>;
  37 +               #address-cells = <1>;
  38 +               #size-cells = <0>;
  39 +
  40 +               hwmon@4b {
  41 +                       compatible = "national,lm92";
  42 +                       reg = <0x4b>;
  43 +               };
  44 +       };
  45 +};
  46 --- a/drivers/i2c/busses/Kconfig
  47 +++ b/drivers/i2c/busses/Kconfig
  48 @@ -659,6 +659,10 @@ config I2C_RIIC
  49           This driver can also be built as a module.  If so, the module
  50           will be called i2c-riic.
  51
  52 +config I2C_RALINK
  53 +       tristate "Ralink I2C Controller"
  54 +       select OF_I2C
  55 +
  56  config HAVE_S3C2410_I2C
  57         bool
  58         help
  59 --- a/drivers/i2c/busses/Makefile
  60 +++ b/drivers/i2c/busses/Makefile
  61 @@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX)         += i2c-pnx.o
  62  obj-$(CONFIG_I2C_PUV3)         += i2c-puv3.o
  63  obj-$(CONFIG_I2C_PXA)          += i2c-pxa.o
  64  obj-$(CONFIG_I2C_PXA_PCI)      += i2c-pxa-pci.o
  65 +obj-$(CONFIG_I2C_RALINK)       += i2c-ralink.o
  66  obj-$(CONFIG_I2C_RIIC)         += i2c-riic.o
  67  obj-$(CONFIG_I2C_S3C2410)      += i2c-s3c2410.o
  68  obj-$(CONFIG_I2C_S6000)                += i2c-s6000.o
  69 --- /dev/null
  70 +++ b/drivers/i2c/busses/i2c-ralink.c
  71 @@ -0,0 +1,299 @@
  72 +/*
  73 + * drivers/i2c/busses/i2c-ralink.c
  74 + *
  75 + * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
  76 + *
  77 + * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
  78 + * (C) 2014 Sittisak <sittisaks@hotmail.com>
  79 + *
  80 + * This software is licensed under the terms of the GNU General Public
  81 + * License version 2, as published by the Free Software Foundation, and
  82 + * may be copied, distributed, and modified under those terms.
  83 + *
  84 + * This program is distributed in the hope that it will be useful,
  85 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
  86 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  87 + * GNU General Public License for more details.
  88 + *
  89 + */
  90 +
  91 +#include <linux/interrupt.h>
  92 +#include <linux/kernel.h>
  93 +#include <linux/module.h>
  94 +#include <linux/reset.h>
  95 +#include <linux/delay.h>
  96 +#include <linux/slab.h>
  97 +#include <linux/init.h>
  98 +#include <linux/errno.h>
  99 +#include <linux/platform_device.h>
 100 +#include <linux/i2c.h>
 101 +#include <linux/io.h>
 102 +#include <linux/err.h>
 103 +
 104 +#include <asm/mach-ralink/ralink_regs.h>
 105 +
 106 +#define REG_CONFIG_REG         0x00
 107 +#define REG_CLKDIV_REG         0x04
 108 +#define REG_DEVADDR_REG                0x08
 109 +#define REG_ADDR_REG           0x0C
 110 +#define REG_DATAOUT_REG                0x10
 111 +#define REG_DATAIN_REG         0x14
 112 +#define REG_STATUS_REG         0x18
 113 +#define REG_STARTXFR_REG       0x1C
 114 +#define REG_BYTECNT_REG                0x20
 115 +
 116 +#define I2C_STARTERR           BIT(4)
 117 +#define I2C_ACKERR             BIT(3)
 118 +#define I2C_DATARDY            BIT(2)
 119 +#define I2C_SDOEMPTY           BIT(1)
 120 +#define I2C_BUSY               BIT(0)
 121 +
 122 +#define I2C_DEVADLEN_7         (6 << 2)
 123 +#define I2C_ADDRDIS            BIT(1)
 124 +
 125 +#define I2C_RETRY              0x1000
 126 +
 127 +#define CLKDIV_VALUE           200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
 128 +//#define CLKDIV_VALUE         50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
 129 +
 130 +#define READ_CMD               0x01
 131 +#define WRITE_CMD              0x00
 132 +#define READ_BLOCK              64
 133 +
 134 +static void __iomem *membase;
 135 +static struct i2c_adapter *adapter;
 136 +
 137 +static void rt_i2c_w32(u32 val, unsigned reg)
 138 +{
 139 +       iowrite32(val, membase + reg);
 140 +}
 141 +
 142 +static u32 rt_i2c_r32(unsigned reg)
 143 +{
 144 +       return ioread32(membase + reg);
 145 +}
 146 +
 147 +static inline int rt_i2c_get_ack(void)
 148 +{
 149 +        return (rt_i2c_r32(REG_STATUS_REG) & I2C_ACKERR) ? -EIO : 0;
 150 +}
 151 +
 152 +static inline int rt_i2c_wait_rx_done(void)
 153 +{
 154 +       int retries = I2C_RETRY;
 155 +
 156 +       do {
 157 +               if (!retries--)
 158 +                       break;
 159 +       } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
 160 +
 161 +       return (retries < 0) ? -ETIMEDOUT : 0;
 162 +}
 163 +
 164 +static inline int rt_i2c_wait_idle(void)
 165 +{
 166 +       int retries = I2C_RETRY;
 167 +
 168 +       do {
 169 +               if (!retries--)
 170 +                       break;
 171 +       } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
 172 +
 173 +       return (retries < 0);
 174 +}
 175 +
 176 +static inline int rt_i2c_wait_tx_done(void)
 177 +{
 178 +       int retries = I2C_RETRY;
 179 +
 180 +       do {
 181 +               if (!retries--)
 182 +                       break;
 183 +       } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
 184 +
 185 +       return (retries < 0) ? -ETIMEDOUT : 0;
 186 +}
 187 +
 188 +static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
 189 +{
 190 +       int i = 0, j = 0, pos = 0;
 191 +       int nblock = msg->len / READ_BLOCK;
 192 +        int rem = msg->len % READ_BLOCK;
 193 +       int ret = 0;
 194 +
 195 +       if (msg->flags & I2C_M_TEN) {
 196 +               printk("10 bits addr not supported\n");
 197 +               return -EINVAL;
 198 +       }
 199 +
 200 +       if (msg->flags & I2C_M_RD) {
 201 +               for (i = 0; i < nblock; i++) {
 202 +                       if (rt_i2c_wait_idle()) {
 203 +                           printk("i2c-read line busy\n");
 204 +                               return -ETIMEDOUT;
 205 +                       }
 206 +                       rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
 207 +                       rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
 208 +                       for (j = 0; j < READ_BLOCK; j++) {
 209 +                               if (rt_i2c_wait_rx_done() < 0)
 210 +                                       ret = rt_i2c_wait_rx_done();
 211 +                                if (rt_i2c_get_ack() < 0)
 212 +                                       ret = rt_i2c_get_ack();
 213 +                               msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 214 +                       }
 215 +               }
 216 +
 217 +               if (rt_i2c_wait_idle()) {
 218 +                       printk("i2c-read line busy\n");
 219 +                       return -ETIMEDOUT;
 220 +               }
 221 +               if (rem) {
 222 +                       rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
 223 +                       rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
 224 +               }
 225 +               for (i = 0; i < rem; i++) {
 226 +                       if (rt_i2c_wait_rx_done() < 0)
 227 +                               ret = rt_i2c_wait_rx_done();
 228 +                        if (rt_i2c_get_ack() < 0)
 229 +                               ret = rt_i2c_get_ack();
 230 +
 231 +                       msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 232 +               }
 233 +       } else {
 234 +               if (rt_i2c_wait_idle()) {
 235 +                       printk("i2c-write line busy\n");
 236 +                       return -ETIMEDOUT;
 237 +               }
 238 +               rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
 239 +               for (i = 0; i < msg->len; i++) {
 240 +                       rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
 241 +                       rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
 242 +
 243 +                       if (rt_i2c_wait_tx_done() < 0)
 244 +                               ret = rt_i2c_wait_tx_done();
 245 +                        if (rt_i2c_get_ack() < 0)
 246 +                               ret = rt_i2c_get_ack();
 247 +               }
 248 +       }
 249 +
 250 +       return ret;
 251 +}
 252 +
 253 +static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
 254 +{
 255 +       int i = 0;
 256 +       int ret = 0;
 257 +
 258 +       if (rt_i2c_wait_idle()) {
 259 +               printk("i2c-master_xfer line busy\n");
 260 +               return -ETIMEDOUT;
 261 +       }
 262 +
 263 +       device_reset(a->dev.parent);
 264 +
 265 +       rt_i2c_w32(m->addr, REG_DEVADDR_REG);
 266 +       rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
 267 +       rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
 268 +
 269 +       for (i = 0; i < n && !ret; i++) {
 270 +               ret = rt_i2c_handle_msg(a, &m[i]);
 271 +
 272 +               if (ret < 0) {
 273 +                       return ret;
 274 +               }
 275 +       }
 276 +
 277 +       return n;
 278 +}
 279 +
 280 +static u32 rt_i2c_func(struct i2c_adapter *a)
 281 +{
 282 +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 283 +}
 284 +
 285 +static const struct i2c_algorithm rt_i2c_algo = {
 286 +       .master_xfer    = rt_i2c_master_xfer,
 287 +       .functionality  = rt_i2c_func,
 288 +};
 289 +
 290 +static int rt_i2c_probe(struct platform_device *pdev)
 291 +{
 292 +       struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 293 +       int ret;
 294 +
 295 +       if (!res) {
 296 +               dev_err(&pdev->dev, "no memory resource found\n");
 297 +               return -ENODEV;
 298 +       }
 299 +
 300 +       adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
 301 +       if (!adapter) {
 302 +               dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
 303 +               return -ENOMEM;
 304 +       }
 305 +
 306 +       membase = devm_request_and_ioremap(&pdev->dev, res);
 307 +       if (IS_ERR(membase))
 308 +               return PTR_ERR(membase);
 309 +
 310 +       strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
 311 +       adapter->owner = THIS_MODULE;
 312 +       adapter->nr = pdev->id;
 313 +       adapter->timeout = HZ;
 314 +       adapter->algo = &rt_i2c_algo;
 315 +       adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 316 +       adapter->dev.parent = &pdev->dev;
 317 +       adapter->dev.of_node = pdev->dev.of_node;
 318 +
 319 +       ret = i2c_add_numbered_adapter(adapter);
 320 +       if (ret)
 321 +               return ret;
 322 +
 323 +       platform_set_drvdata(pdev, adapter);
 324 +
 325 +       dev_info(&pdev->dev, "loaded\n");
 326 +
 327 +       return 0;
 328 +}
 329 +
 330 +static int rt_i2c_remove(struct platform_device *pdev)
 331 +{
 332 +       platform_set_drvdata(pdev, NULL);
 333 +
 334 +       return 0;
 335 +}
 336 +
 337 +static const struct of_device_id i2c_rt_dt_ids[] = {
 338 +       { .compatible = "ralink,rt2880-i2c", },
 339 +       { /* sentinel */ }
 340 +};
 341 +
 342 +MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
 343 +
 344 +static struct platform_driver rt_i2c_driver = {
 345 +       .probe          = rt_i2c_probe,
 346 +       .remove         = rt_i2c_remove,
 347 +       .driver         = {
 348 +               .owner  = THIS_MODULE,
 349 +               .name   = "i2c-ralink",
 350 +               .of_match_table = i2c_rt_dt_ids,
 351 +       },
 352 +};
 353 +
 354 +static int __init i2c_rt_init (void)
 355 +{
 356 +       return platform_driver_register(&rt_i2c_driver);
 357 +}
 358 +subsys_initcall(i2c_rt_init);
 359 +
 360 +static void __exit i2c_rt_exit (void)
 361 +{
 362 +       platform_driver_unregister(&rt_i2c_driver);
 363 +}
 364 +
 365 +module_exit (i2c_rt_exit);
 366 +
 367 +MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
 368 +MODULE_DESCRIPTION("Ralink I2c host driver");
 369 +MODULE_LICENSE("GPL");
 370 +MODULE_ALIAS("platform:Ralink-I2C");