[rb532] refresh 2.6.24 patches
[openwrt/svn-archive/archive.git] / target / linux / rb532 / patches-2.6.24 / 100-rb5xx_support.patch
1 --- a/arch/mips/Kconfig
2 +++ b/arch/mips/Kconfig
3 @@ -687,6 +687,23 @@ config WR_PPMC
4 This enables support for the Wind River MIPS32 4KC PPMC evaluation
5 board, which is based on GT64120 bridge chip.
6
7 +config MIKROTIK_RB500
8 + bool "Support for RB5xx boards"
9 + select HW_HAS_PCI
10 + select CEVT_R4K
11 + select CSRC_R4K
12 + select IRQ_CPU
13 + select SYS_HAS_CPU_MIPS32_R1
14 + select SYS_SUPPORTS_LITTLE_ENDIAN
15 + select SYS_SUPPORTS_32BIT_KERNEL
16 + select SWAP_IO_SPACE
17 + select DMA_NONCOHERENT
18 + select GENERIC_GPIO
19 + help
20 + Support the Mikrotik(tm) Routerboard 500 series,
21 + such as the RB532.
22 +
23 +
24 endchoice
25
26 source "arch/mips/au1000/Kconfig"
27 @@ -967,6 +984,7 @@ config MIPS_L1_CACHE_SHIFT
28 default "4" if MACH_DECSTATION
29 default "7" if SGI_IP27 || SNI_RM
30 default "4" if PMC_MSP4200_EVAL
31 + default "4" if MIKROTIK_RB500
32 default "5"
33
34 config HAVE_STD_PC_SERIAL_PORT
35 --- a/arch/mips/Makefile
36 +++ b/arch/mips/Makefile
37 @@ -297,6 +297,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
38 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
39
40 #
41 +# Routerboard 532 board
42 +#
43 +core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/
44 +cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
45 +load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000
46 +
47 +#
48 # For all MIPS, Inc. eval boards
49 #
50 core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
51 --- a/arch/mips/pci/Makefile
52 +++ b/arch/mips/pci/Makefile
53 @@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
54 obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
55 obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
56 obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
57 +obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o
58 --- a/drivers/pci/Makefile
59 +++ b/drivers/pci/Makefile
60 @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
61 obj-$(CONFIG_PPC64) += setup-bus.o
62 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
63 obj-$(CONFIG_X86_VISWS) += setup-irq.o
64 +obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
65
66 #
67 # ACPI Related PCI FW Functions
68 --- a/include/asm-mips/bootinfo.h
69 +++ b/include/asm-mips/bootinfo.h
70 @@ -198,6 +198,14 @@
71 #define MACH_GROUP_BRCM 23 /* Broadcom */
72 #define MACH_BCM47XX 1 /* Broadcom BCM47XX */
73
74 +
75 +/*
76 + * Valid machtype for group Mikrotik
77 + */
78 +#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */
79 +#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
80 +#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
81 +
82 #define CL_SIZE COMMAND_LINE_SIZE
83
84 const char *get_system_type(void);
85 --- a/include/asm-mips/cpu.h
86 +++ b/include/asm-mips/cpu.h
87 @@ -196,7 +196,7 @@ enum cpu_type_enum {
88 */
89 CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000,
90 CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450,
91 - CPU_BCM3302, CPU_BCM4710,
92 + CPU_BCM3302, CPU_BCM4710, CPU_RC32300,
93
94 /*
95 * MIPS64 class processors