sunxi: driver refresh for 3.13
[openwrt/svn-archive/archive.git] / target / linux / sunxi / patches-3.13 / 153-1-stmmac-enable-main-clock-when-probing.patch
1 From 62866e98737e77c87f9dec99edea76ab54360770 Mon Sep 17 00:00:00 2001
2 From: Chen-Yu Tsai <wens@csie.org>
3 Date: Fri, 17 Jan 2014 21:24:40 +0800
4 Subject: [PATCH] net: stmmac: Enable stmmac main clock when probing hardware
5
6 The stmmac driver does not enable the main clock during the probe phase.
7 If the clock was not enabled by the boot loader or was disabled by the
8 kernel, hardware features and the MDIO bus would not be probed properly.
9
10 Signed-off-by: Chen-Yu Tsai <wens@csie.org>
11 Signed-off-by: David S. Miller <davem@davemloft.net>
12 ---
13 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +++++++++++------------
14 1 file changed, 13 insertions(+), 13 deletions(-)
15
16 diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
17 index cddcf76..0d2c4cb 100644
18 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
19 +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
20 @@ -1680,8 +1680,6 @@ static int stmmac_open(struct net_device *dev)
21 struct stmmac_priv *priv = netdev_priv(dev);
22 int ret;
23
24 - clk_prepare_enable(priv->stmmac_clk);
25 -
26 stmmac_check_ether_addr(priv);
27
28 if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI &&
29 @@ -1819,7 +1817,6 @@ static int stmmac_release(struct net_device *dev)
30 #ifdef CONFIG_STMMAC_DEBUG_FS
31 stmmac_exit_fs();
32 #endif
33 - clk_disable_unprepare(priv->stmmac_clk);
34
35 stmmac_release_ptp(priv);
36
37 @@ -2727,10 +2724,18 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
38 if ((phyaddr >= 0) && (phyaddr <= 31))
39 priv->plat->phy_addr = phyaddr;
40
41 + priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
42 + if (IS_ERR(priv->stmmac_clk)) {
43 + dev_warn(priv->device, "%s: warning: cannot get CSR clock\n",
44 + __func__);
45 + goto error_clk_get;
46 + }
47 + clk_prepare_enable(priv->stmmac_clk);
48 +
49 /* Init MAC and get the capabilities */
50 ret = stmmac_hw_init(priv);
51 if (ret)
52 - goto error_free_netdev;
53 + goto error_hw_init;
54
55 ndev->netdev_ops = &stmmac_netdev_ops;
56
57 @@ -2768,12 +2773,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
58 goto error_netdev_register;
59 }
60
61 - priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME);
62 - if (IS_ERR(priv->stmmac_clk)) {
63 - pr_warn("%s: warning: cannot get CSR clock\n", __func__);
64 - goto error_clk_get;
65 - }
66 -
67 /* If a specific clk_csr value is passed from the platform
68 * this means that the CSR Clock Range selection cannot be
69 * changed at run-time and it is fixed. Viceversa the driver'll try to
70 @@ -2801,12 +2800,12 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
71 return priv;
72
73 error_mdio_register:
74 - clk_put(priv->stmmac_clk);
75 -error_clk_get:
76 unregister_netdev(ndev);
77 error_netdev_register:
78 netif_napi_del(&priv->napi);
79 -error_free_netdev:
80 +error_hw_init:
81 + clk_disable_unprepare(priv->stmmac_clk);
82 +error_clk_get:
83 free_netdev(ndev);
84
85 return NULL;
86 @@ -2833,6 +2832,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
87 stmmac_mdio_unregister(ndev);
88 netif_carrier_off(ndev);
89 unregister_netdev(ndev);
90 + clk_disable_unprepare(priv->stmmac_clk);
91 free_netdev(ndev);
92
93 return 0;
94 --
95 1.8.5.5
96