kernel: update 3.18 to 3.18.14
[openwrt/svn-archive/archive.git] / target / linux / sunxi / patches-3.18 / 300-dt-sun7i-add-bananapi.patch
1 From 29b4146ec174f0f598d6b454caa335e8f57e392b Mon Sep 17 00:00:00 2001
2 From: Hans de Goede <hdegoede@redhat.com>
3 Date: Mon, 28 Jul 2014 23:05:14 +0200
4 Subject: [PATCH] ARM: dts: sun7i: Add Banana Pi board
5
6 The Banana Pi is an A20 based development board using Raspberry Pi compatible
7 IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
8 and stereo audio out + various expenansion headers:
9
10 http://www.lemaker.org/
11
12 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
13 ---
14 arch/arm/boot/dts/Makefile | 1 +
15 arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++
16 2 files changed, 215 insertions(+)
17 create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts
18
19 --- a/arch/arm/boot/dts/Makefile
20 +++ b/arch/arm/boot/dts/Makefile
21 @@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
22 sun6i-a31-hummingbird.dtb \
23 sun6i-a31-m9.dtb
24 dtb-$(CONFIG_MACH_SUN7I) += \
25 + sun7i-a20-bananapi.dtb \
26 sun7i-a20-cubieboard2.dtb \
27 sun7i-a20-cubietruck.dtb \
28 sun7i-a20-hummingbird.dtb \
29 --- /dev/null
30 +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
31 @@ -0,0 +1,214 @@
32 +/*
33 + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
34 + *
35 + * Hans de Goede <hdegoede@redhat.com>
36 + *
37 + * This file is dual-licensed: you can use it either under the terms
38 + * of the GPL or the X11 license, at your option. Note that this dual
39 + * licensing only applies to this file, and not this project as a
40 + * whole.
41 + *
42 + * a) This library is free software; you can redistribute it and/or
43 + * modify it under the terms of the GNU General Public License as
44 + * published by the Free Software Foundation; either version 2 of the
45 + * License, or (at your option) any later version.
46 + *
47 + * This library is distributed in the hope that it will be useful,
48 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
49 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
50 + * GNU General Public License for more details.
51 + *
52 + * You should have received a copy of the GNU General Public
53 + * License along with this library; if not, write to the Free
54 + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
55 + * MA 02110-1301 USA
56 + *
57 + * Or, alternatively,
58 + *
59 + * b) Permission is hereby granted, free of charge, to any person
60 + * obtaining a copy of this software and associated documentation
61 + * files (the "Software"), to deal in the Software without
62 + * restriction, including without limitation the rights to use,
63 + * copy, modify, merge, publish, distribute, sublicense, and/or
64 + * sell copies of the Software, and to permit persons to whom the
65 + * Software is furnished to do so, subject to the following
66 + * conditions:
67 + *
68 + * The above copyright notice and this permission notice shall be
69 + * included in all copies or substantial portions of the Software.
70 + *
71 + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
72 + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
73 + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
74 + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
75 + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
76 + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
77 + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
78 + * OTHER DEALINGS IN THE SOFTWARE.
79 + */
80 +
81 +/dts-v1/;
82 +/include/ "sun7i-a20.dtsi"
83 +/include/ "sunxi-common-regulators.dtsi"
84 +
85 +/ {
86 + model = "LeMaker Banana Pi";
87 + compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
88 +
89 + soc@01c00000 {
90 + spi0: spi@01c05000 {
91 + pinctrl-names = "default";
92 + pinctrl-0 = <&spi0_pins_a>;
93 + status = "okay";
94 + };
95 +
96 + mmc0: mmc@01c0f000 {
97 + pinctrl-names = "default";
98 + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
99 + vmmc-supply = <&reg_vcc3v3>;
100 + bus-width = <4>;
101 + cd-gpios = <&pio 7 10 0>; /* PH10 */
102 + cd-inverted;
103 + status = "okay";
104 + };
105 +
106 + usbphy: phy@01c13400 {
107 + usb1_vbus-supply = <&reg_usb1_vbus>;
108 + usb2_vbus-supply = <&reg_usb2_vbus>;
109 + status = "okay";
110 + };
111 +
112 + ehci0: usb@01c14000 {
113 + status = "okay";
114 + };
115 +
116 + ohci0: usb@01c14400 {
117 + status = "okay";
118 + };
119 +
120 + ahci: sata@01c18000 {
121 + status = "okay";
122 + };
123 +
124 + ehci1: usb@01c1c000 {
125 + status = "okay";
126 + };
127 +
128 + ohci1: usb@01c1c400 {
129 + status = "okay";
130 + };
131 +
132 + pinctrl@01c20800 {
133 + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
134 + allwinner,pins = "PH10";
135 + allwinner,function = "gpio_in";
136 + allwinner,drive = <0>;
137 + allwinner,pull = <1>;
138 + };
139 +
140 + gmac_power_pin_bananapi: gmac_power_pin@0 {
141 + allwinner,pins = "PH23";
142 + allwinner,function = "gpio_out";
143 + allwinner,drive = <0>;
144 + allwinner,pull = <0>;
145 + };
146 +
147 + led_pins_bananapi: led_pins@0 {
148 + allwinner,pins = "PH24";
149 + allwinner,function = "gpio_out";
150 + allwinner,drive = <0>;
151 + allwinner,pull = <0>;
152 + };
153 + };
154 +
155 + ir0: ir@01c21800 {
156 + pinctrl-names = "default";
157 + pinctrl-0 = <&ir0_pins_a>;
158 + status = "okay";
159 + };
160 +
161 + uart0: serial@01c28000 {
162 + pinctrl-names = "default";
163 + pinctrl-0 = <&uart0_pins_a>;
164 + status = "okay";
165 + };
166 +
167 + uart3: serial@01c28c00 {
168 + pinctrl-names = "default";
169 + pinctrl-0 = <&uart3_pins_b>;
170 + status = "okay";
171 + };
172 +
173 + uart7: serial@01c29c00 {
174 + pinctrl-names = "default";
175 + pinctrl-0 = <&uart7_pins_a>;
176 + status = "okay";
177 + };
178 +
179 + i2c0: i2c@01c2ac00 {
180 + pinctrl-names = "default";
181 + pinctrl-0 = <&i2c0_pins_a>;
182 + status = "okay";
183 +
184 + axp209: pmic@34 {
185 + compatible = "x-powers,axp209";
186 + reg = <0x34>;
187 + interrupt-parent = <&nmi_intc>;
188 + interrupts = <0 8>;
189 +
190 + interrupt-controller;
191 + #interrupt-cells = <1>;
192 + };
193 + };
194 +
195 + i2c2: i2c@01c2b400 {
196 + pinctrl-names = "default";
197 + pinctrl-0 = <&i2c2_pins_a>;
198 + status = "okay";
199 + };
200 +
201 + gmac: ethernet@01c50000 {
202 + pinctrl-names = "default";
203 + pinctrl-0 = <&gmac_pins_rgmii_a>;
204 + phy = <&phy1>;
205 + phy-mode = "rgmii";
206 + phy-supply = <&reg_gmac_3v3>;
207 + status = "okay";
208 +
209 + phy1: ethernet-phy@1 {
210 + reg = <1>;
211 + };
212 + };
213 + };
214 +
215 + leds {
216 + compatible = "gpio-leds";
217 + pinctrl-names = "default";
218 + pinctrl-0 = <&led_pins_bananapi>;
219 +
220 + green {
221 + label = "bananapi:green:usr";
222 + gpios = <&pio 7 24 0>;
223 + };
224 + };
225 +
226 + reg_usb1_vbus: usb1-vbus {
227 + status = "okay";
228 + };
229 +
230 + reg_usb2_vbus: usb2-vbus {
231 + status = "okay";
232 + };
233 +
234 + reg_gmac_3v3: gmac-3v3 {
235 + compatible = "regulator-fixed";
236 + pinctrl-names = "default";
237 + pinctrl-0 = <&gmac_power_pin_bananapi>;
238 + regulator-name = "gmac-3v3";
239 + regulator-min-microvolt = <3300000>;
240 + regulator-max-microvolt = <3300000>;
241 + startup-delay-us = <50000>;
242 + enable-active-high;
243 + gpio = <&pio 7 23 0>;
244 + };
245 +};