utils/lm-sensors/files/sensors.conf

   1 chip "pc87366-*"
   2
   3 # Soekris net4801 configuration
   4
   5 # Written by Henrik Brix Andersen <henrik@brixandersen.dk>
   6 # Latest version can be found at http://www.brixandersen.dk/
   7
   8 # The configuration is partly based on the PC87366 datasheet and
   9 # partly borrowed from the env4801 utility by Poul-Henning
  10 # Kamp <phk@phk.freebsd.dk>
  11
  12 # Datasheet: http://www.winbond.com/PDF/APCsheet/PC87366.pdf
  13 # env4801:   http://phk.freebsd.dk/soekris/env4801/
  14
  15
  16 # Voltage inputs
  17   ignore vid
  18
  19   # Unknown
  20   # label in0     "avi0"
  21   ignore in0
  22
  23
  24   # Core Voltage, +2.0V
  25   label in1     "VCORE"
  26   set in1_min   1.9
  27   set in1_max   2.1
  28
  29
  30   # VCC, +5.0V
  31   label in2     "VCC"
  32   compute in2   @*2, @/2
  33
  34
  35   # Power Supply Input, +6.0V - +28.0V
  36   label in3     "VPWR"
  37   compute in3   @*20.1, @/20.1
  38   set in3_min    6.0
  39   set in3_max   28.0
  40
  41
  42   # +12V
  43   label in4     "+12V"
  44   compute in4   @*4.83, @/4.83
  45   set in4_min   11
  46   set in4_max   13
  47
  48
  49   # -12V
  50   label in5     "-12V"
  51   # If in10 on your net4801 doesn't have the 3.3V reference, use this
  52   # compute line instead:
  53   # compute in5   (@-3.3)*19.2+3.3, (@-3.3)/19.2+3.3
  54   compute in5   (@-in10)*19.2+in10, (@-in10)/19.2+in10
  55   set in5_min   -13
  56   set in5_max   -11
  57
  58
  59   # GND, 0V
  60   label in6     "GND"
  61   set in6_min   0
  62   set in6_max   0
  63
  64
  65   # Standby Voltage, +3.3V
  66   # Internally divided by 2
  67   label in7     "Vsb"
  68   compute in7   @*2, @/2
  69   set in7_min    3.0
  70   set in7_max    3.6
  71
  72
  73   # Supply Voltage, +3.3V
  74   # Internally divided by 2
  75   label in8     "Vdd"
  76   compute in8   @*2, @/2
  77   set in8_min    3.0
  78   set in8_max    3.6
  79
  80
  81   # Battery Backup Supply Voltage, +3.0V
  82   label in9     "Vbat"
  83   set in9_min    2.4
  84   set in9_max    3.6
  85
  86
  87   # Analog Supply Voltage, +3.3V
  88   # Internally divided by 2
  89   label in10    "AVdd"
  90   compute in10  @*2, @/2
  91   set in10_min   3.0
  92   set in10_max   3.6
  93
  94
  95 # Temperature inputs
  96   ignore temp1
  97   ignore temp2
  98
  99   # PC87366 Internal Temperature
 100   # PC87366 Recommended Operating Conditions: 0 - 70C
 101   # SC1100  Recommended Operating Conditions: 0 - 85C
 102   label temp3       "Temp"
 103   label temp3_crit  "Critical"
 104   set temp3_min      0
 105   set temp3_max     70
 106   set temp3_crit    85
 107
 108
 109   ignore temp4
 110   ignore temp5
 111   ignore temp6
 112
 113
 114 # Fan inputs
 115   ignore fan1
 116   ignore fan2
 117   ignore fan3