remove useless xorg macros patch
[openwrt/svn-archive/archive.git] / utils / lm-sensors / files / sensors.conf
1 chip "pc87366-*"
2
3 # Soekris net4801 configuration
4
5 # Written by Henrik Brix Andersen <henrik@brixandersen.dk>
6 # Latest version can be found at http://www.brixandersen.dk/
7
8 # The configuration is partly based on the PC87366 datasheet and
9 # partly borrowed from the env4801 utility by Poul-Henning
10 # Kamp <phk@phk.freebsd.dk>
11
12 # Datasheet: http://www.winbond.com/PDF/APCsheet/PC87366.pdf
13 # env4801: http://phk.freebsd.dk/soekris/env4801/
14
15
16 # Voltage inputs
17 ignore vid
18
19 # Unknown
20 # label in0 "avi0"
21 ignore in0
22
23
24 # Core Voltage, +2.0V
25 label in1 "VCORE"
26 set in1_min 1.9
27 set in1_max 2.1
28
29
30 # VCC, +5.0V
31 label in2 "VCC"
32 compute in2 @*2, @/2
33
34
35 # Power Supply Input, +6.0V - +28.0V
36 label in3 "VPWR"
37 compute in3 @*20.1, @/20.1
38 set in3_min 6.0
39 set in3_max 28.0
40
41
42 # +12V
43 label in4 "+12V"
44 compute in4 @*4.83, @/4.83
45 set in4_min 11
46 set in4_max 13
47
48
49 # -12V
50 label in5 "-12V"
51 # If in10 on your net4801 doesn't have the 3.3V reference, use this
52 # compute line instead:
53 # compute in5 (@-3.3)*19.2+3.3, (@-3.3)/19.2+3.3
54 compute in5 (@-in10)*19.2+in10, (@-in10)/19.2+in10
55 set in5_min -13
56 set in5_max -11
57
58
59 # GND, 0V
60 label in6 "GND"
61 set in6_min 0
62 set in6_max 0
63
64
65 # Standby Voltage, +3.3V
66 # Internally divided by 2
67 label in7 "Vsb"
68 compute in7 @*2, @/2
69 set in7_min 3.0
70 set in7_max 3.6
71
72
73 # Supply Voltage, +3.3V
74 # Internally divided by 2
75 label in8 "Vdd"
76 compute in8 @*2, @/2
77 set in8_min 3.0
78 set in8_max 3.6
79
80
81 # Battery Backup Supply Voltage, +3.0V
82 label in9 "Vbat"
83 set in9_min 2.4
84 set in9_max 3.6
85
86
87 # Analog Supply Voltage, +3.3V
88 # Internally divided by 2
89 label in10 "AVdd"
90 compute in10 @*2, @/2
91 set in10_min 3.0
92 set in10_max 3.6
93
94
95 # Temperature inputs
96 ignore temp1
97 ignore temp2
98
99 # PC87366 Internal Temperature
100 # PC87366 Recommended Operating Conditions: 0 - 70C
101 # SC1100 Recommended Operating Conditions: 0 - 85C
102 label temp3 "Temp"
103 label temp3_crit "Critical"
104 set temp3_min 0
105 set temp3_max 70
106 set temp3_crit 85
107
108
109 ignore temp4
110 ignore temp5
111 ignore temp6
112
113
114 # Fan inputs
115 ignore fan1
116 ignore fan2
117 ignore fan3