config 'multiwan' 'config'
	# REMOVE THIS LINE OR PUT TO 1 TO ENABLE MULTIWAN
	option 'enabled' '0'

	option 'default_route' 'balancer'
	# health_monitor below is defaulted to parallel, and can be set to
	# serial to save system resources.
	# option 'health_monitor' 'serial'
	# option 'debug' '1'

config 'interface' 'wan'
	option 'weight' '10'
	option 'health_interval' '10'
	option 'icmp_hosts' 'dns'
	# icmp_count is defaulted to 1, and can be increased to reduce
	# false positives.
	# option 'icmp_count' '3'
	option 'timeout' '3'
	option 'health_fail_retries' '3'
	option 'health_recovery_retries' '5'
	option 'failover_to' 'wan2'
	option 'dns' 'auto'

config 'interface' 'wan2'
	option 'weight' '10'
	option 'health_interval' '10'
	option 'icmp_hosts' 'gateway'
	option 'timeout' '3'
	option 'health_fail_retries' '3'
	option 'health_recovery_retries' '5'
	option 'failover_to' 'balancer'
	option 'dns' '208.67.222.222 208.67.220.220'

config 'mwanfw'
	option 'src' '192.168.1.0/24'
	option 'dst' 'ftp.netlab7.com'
	option 'proto' 'tcp'
	option 'ports' '21'
	option 'wanrule' 'wan2'

# VoIP traffic goes through wan
# config 'mwanfw'
	# option 'src' '192.168.1.0/24'
	# option 'proto' 'udp'
	# option 'port_type' 'source-ports'
	# option 'ports' '5060,16384:16482'
	# option 'wanrule' 'wan'

config 'mwanfw'
	option 'src' '192.168.0.3'
	option 'proto' 'icmp'
	option 'wanrule' 'balancer'

config 'mwanfw'
	option 'dst' 'www.whatismyip.com'
	option 'wanrule' 'fastbalancer'