#!/bin/sh [ -e /etc/config/network ] && exit 0 ( mkdir -p /etc/config if [ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ]; then # WGT634u echo boardtype=wgt634u else strings /dev/mtdblock/3 fi ) | awk ' function p(name) { if (c[name] != "") print name "=\"" c[name] "\"" } BEGIN { FS="=" c["lan_ifname"]="br0" c["lan_ifnames"]="vlan0 eth1" c["wan_proto"]="none" c["wan_ifname"]="vlan1" c["vlan0ports"]="1 2 3 4 5*" c["vlan1ports"]="0 5" } ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { nvram[$1] = $2 } END { # v1 hardware if (nvram["boardtype"] == "bcm4710dev") { # Linksys WRT54G v1.x if (nvram["boardnum"] == "42") { c["vlan0ports"]="" c["vlan1ports"]="" c["lan_ifnames"]="vlan2 eth2" } # Asus WL-500g if (nvram["boardnum"] == "asusX") { c["lan_ifnames"]="eth0 eth1 eth2" # FIXME # wan_ifname=eth1 } } if (nvram["boardtype"] == "wgt634u") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if (nvram["boardtype"] == "0x0467") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } # WAP54G if ((nvram["boardnum"] == "2") || \ (nvram["boardnum"] == "1024")) { c["lan_ifnames"]="eth0 eth1" c["wan_ifname"]="" } print "#### VLAN configuration " print "vlan0hwname=et0" print "vlan1hwname=et0" p("vlan0ports") p("vlan1ports") print "" print "" print "#### LAN configuration" print "lan_proto=\"static\"" p("lan_ifname") p("lan_ifnames") print "lan_ipaddr=\"192.168.1.1\"" print "# lan_dns=\"192.168.1.1\"" print "# lan_gateway=\"192.168.1.1\"" print "" print "" print "#### WAN configuration" print "# wan_proto: WAN protocol, available protocols:" print "# none: disable" print "# dhcp: DHCP" print "# static: Static IP" print "# pppoe: PPP over Ethernet" print "# pptp: Point-to-Point tunneling Protocol" print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")" print "" print "wan_proto=dhcp" p("wan_ifname") print "# wan_ipaddr=\"192.168.0.2\"" print "# wan_netmask=\"255.255.255.0\"" print "# wan_gateway=\"192.168.0.1\"" print "# wan_dns=\"192.168.0.1\"" print "" print "## PPP over Ethernet and PPTP" print "# wan_ifname=\"ppp0\"" print "# pppoe_ifname=\"" c["wan_ifname"] "\"" print "# pptp_ifname=\"" c["wan_ifname"] "\"" print "# pptp_server_ip=\"192.168.0.1\"" } ' > /etc/config/network