/dts-v1/; /include/ "rt5350.dtsi" / { compatible = "ALL5003", "ralink,rt5350-soc"; model = "Allnet ALL5003"; palmbus@10000000 { gpio0: gpio@600 { status = "okay"; }; spi@b00 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e"; reg = <0 0>; linux,modalias = "m25p80", "mx25l25635e"; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; }; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; ralink,function = "gpio"; }; }; }; ethernet@10100000 { mtd-mac-address = <&factory 0x28>; }; esw@10110000 { ralink,portmap = <0x3f>; }; wmac@10180000 { ralink,mtd-eeprom = <&factory 0>; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; i2c-gpio { compatible = "i2c-gpio"; gpios = <&gpio0 1 0 &gpio0 2 0>; i2c-gpio,delay-us = <10>; pcf0: iexp@38 { #gpio-cells = <2>; compatible = "inxp,pcf8574a"; reg = <0x38>; gpio-controller; }; hwmon@4b { compatible = "national,lm92"; reg = <0x4b>; }; }; gpio-leds { compatible = "gpio-leds"; ld1 { label = "all5003:green:ld1"; gpios = <&pcf0 0 1>; }; ld2 { label = "all5003:green:ld2"; gpios = <&pcf0 1 1>; }; }; };