/dts-v1/; /include/ "mt7620a.dtsi" / { compatible = "TINY-AC", "ralink,mt7620a-soc"; model = "Dovado Tiny AC"; chosen { bootargs = "console=ttyS0,57600"; }; palmbus@10000000 { gpio0: gpio@600 { status = "okay"; }; gpio2: gpio@660 { status = "okay"; }; gpio3: gpio@688 { status = "okay"; }; spi@b00 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0 0>; linux,modalias = "m25p80", "mx25l6405d"; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; ethernet@10100000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; mediatek,portmap = "llllw"; port@4 { status = "okay"; phy-mode = "rgmii"; phy-handle = <&phy4>; }; port@5 { status = "okay"; phy-mode = "rgmii"; phy-handle = <&phy5>; }; mdio-bus { status = "okay"; phy4: ethernet-phy@4 { reg = <4>; phy-mode = "rgmii"; }; phy5: ethernet-phy@5 { reg = <5>; phy-mode = "rgmii"; }; }; }; gsw@10110000 { mediatek,port4 = "gmac"; mediatek,mt7530 = <1>; }; wmac@10180000 { ralink,eeprom = "rt2x00pci_1_0.eeprom"; }; pcie@10140000 { status = "okay"; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "uartf", "nd_sd", "wled"; ralink,function = "gpio"; }; }; }; gpio-leds { compatible = "gpio-leds"; usb { label = "tiny-ac:green:usb"; gpios = <&gpio0 11 1>; }; wifi { label = "tiny-ac:orange:wifi"; gpios = <&gpio3 0 1>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 13 1>; linux,code = <0x198>; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usbpower { gpio-export,name = "usbpower"; gpio-export,output = <1>; gpios = <&gpio2 5 0>; }; }; };