/include/ "mt7628an.dtsi"

/ {
	chosen {
		bootargs = "console=ttyS0,115200";
	};

	palmbus@10000000 {
		spi@b00 {
			status = "okay";

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "jedec,spi-nor";
				reg = <0 0>;
				spi-max-frequency = <10000000>;
				m25p,chunked-io = <32>;

				partition@0 {
					label = "u-boot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "u-boot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0x1fb0000>;
				};
			};


			spidev@1 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "spidev";
				reg = <1 0>;
				linux,modalias = "spidev", "spidev";
				spi-max-frequency = <10000000>;
			};
		};

		uart1@d00 {
			status = "okay";
		};

		i2c@900 {
			status = "okay";
		};

	};

	ethernet@10100000 {
		mtd-mac-address = <&factory 0x4>;
		ralink,port-map = "llllw";
	};

	sdhci@10130000 {
		status = "okay";
	};

	pcie@10140000 {
		status = "okay";
	};


	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 5 1>;
			linux,code = <0x198>;
		};
	};

};