output firmware files in bin/$(BOARD) instead of bin/

[openwrt/svn-archive/archive.git] / Config.in

diff --git a/Config.in b/Config.in
index 9879c7d9c099b5bb0418f3ee4867164be31e6db9..71a7c7da8ac23a97f103dcfc5b9b725f6edaccf0 100644 (file)
--- a/Config.in
+++ b/Config.in
@@ -1,4 +1,4 @@
-# Copyright (C) 2006-2007 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org

 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.


@@ -20,6 +20,34 @@ menu "Target Images"
                help
                  Embed the rootfs into the kernel (initramfs)
 
                help
                  Embed the rootfs into the kernel (initramfs)
 

+       choice
+               prompt "ramdisk compression"
+               depends TARGET_ROOTFS_INITRAMFS
+               depends !LINUX_2_6_21
+               depends !LINUX_2_6_25
+               depends !LINUX_2_6_27
+               depends !LINUX_2_6_28
+               default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
+               default TARGET_INITRAMFS_COMPRESSION_NONE
+               help
+                 Select ramdisk compression.
+
+               config TARGET_INITRAMFS_COMPRESSION_NONE
+                       bool "NONE"
+
+               config TARGET_INITRAMFS_COMPRESSION_GZIP
+                       bool "GZIP"
+
+               config TARGET_INITRAMFS_COMPRESSION_BZIP2
+                       bool "BZIP2"
+
+               config TARGET_INITRAMFS_COMPRESSION_LZMA
+                       bool "LZMA"
+
+               config TARGET_INITRAMFS_COMPRESSION_LZO
+                       bool "LZO"
+       endchoice
+

        config TARGET_ROOTFS_JFFS2
                bool "jffs2"
                default y if USES_JFFS2
        config TARGET_ROOTFS_JFFS2
                bool "jffs2"
                default y if USES_JFFS2


@@ -40,14 +68,14 @@ menu "Target Images"
                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a compressed tar archive of the the root filesystem
                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a compressed tar archive of the the root filesystem

-                 
+

        config TARGET_ROOTFS_CPIOGZ
                bool "cpiogz"
                default y if USES_CPIOGZ
                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a compressed cpio archive of the the root filesystem
        config TARGET_ROOTFS_CPIOGZ
                bool "cpiogz"
                default y if USES_CPIOGZ
                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a compressed cpio archive of the the root filesystem

-                 
+

        config TARGET_ROOTFS_EXT2FS
                bool "ext2"
                default y if USES_EXT2
        config TARGET_ROOTFS_EXT2FS
                bool "ext2"
                default y if USES_EXT2


@@ -55,12 +83,12 @@ menu "Target Images"
                help
                  Ext2 file system with some free space for uml images
 
                help
                  Ext2 file system with some free space for uml images
 

-       config TARGET_ROOTFS_ISO 
-               bool "iso" 
-               default n 
-               depends TARGET_ROOTFS_INITRAMFS && TARGET_x86 
-               help 
-                 Create some bootable ISO image 
+       config TARGET_ROOTFS_ISO
+               bool "iso"
+               default n
+               depends TARGET_ROOTFS_INITRAMFS && TARGET_x86
+               help
+                 Create some bootable ISO image

 
 comment "Image Options"
 
 
 comment "Image Options"
 


@@ -97,8 +125,23 @@ config CLEAN_IPKG
        help
                This removes all ipkg data from the target directory before building the root fs
 
        help
                This removes all ipkg data from the target directory before building the root fs
 

+config LARGEFILE
+       bool
+       prompt "Enable large file (files > 2 GB) support"
+       default y
+       help
+         Enable large file (files > 2 GB) support.
+
+config SHADOW_PASSWORDS
+       bool
+       prompt "Enable shadow password support"
+       default y
+       help
+         Enable shadow password support.
+

 choice
        prompt "Binary stripping method"
 choice
        prompt "Binary stripping method"

+       default USE_STRIP   if EXTERNAL_TOOLCHAIN

        default USE_STRIP   if USE_GLIBC || USE_EGLIBC
        default USE_SSTRIP
        help
        default USE_STRIP   if USE_GLIBC || USE_EGLIBC
        default USE_SSTRIP
        help


@@ -111,14 +154,12 @@ choice
 
        config USE_STRIP
                bool "strip"
 
        config USE_STRIP
                bool "strip"

-               depends !DEBUG

                help
                  This will install binaries stripped using strip from binutils
 
 
        config USE_SSTRIP
                bool "sstrip"
                help
                  This will install binaries stripped using strip from binutils
 
 
        config USE_SSTRIP
                bool "sstrip"

-               depends !DEBUG

                depends !USE_GLIBC
                depends !USE_EGLIBC
                help
                depends !USE_GLIBC
                depends !USE_EGLIBC
                help


@@ -134,6 +175,14 @@ config USE_MKLIBS
          Note that this will make the system libraries incompatible with most of the packages
          that are not selected during the build process
 
          Note that this will make the system libraries incompatible with most of the packages
          that are not selected during the build process
 

+config STRIP_KERNEL_EXPORTS
+       depends LINUX_2_6
+       bool "Strip unnecessary exports from the kernel image"
+       help
+         Reduces kernel size by stripping unused kernel exports from the kernel image
+         Note that this might make the kernel incompatible with any kernel modules that
+         were not selected at the time the kernel image was created
+

 comment "Package build options"
 
 config DEBUG
 comment "Package build options"
 
 config DEBUG


@@ -150,11 +199,11 @@ config DEBUG_DIR
                This will install all compiled package binaries into build_dir/target-*/debug-*/,
                useful for cross-debugging via gdb/gdbserver
 
                This will install all compiled package binaries into build_dir/target-*/debug-*/,
                useful for cross-debugging via gdb/gdbserver
 

-config IPV6 
-        bool 
+config IPV6
+        bool

         prompt "Enable IPv6 support in packages"
         prompt "Enable IPv6 support in packages"

-        default n 
-        help 
+        default n
+        help

                 Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
 
 comment "Kernel build options"
                 Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
 
 comment "Kernel build options"


@@ -164,6 +213,7 @@ config KERNEL_KALLSYMS
        default n
        help
                This will give you more information in stack traces from kernel oopses
        default n
        help
                This will give you more information in stack traces from kernel oopses

+

 config KERNEL_PROFILING
        bool "Compile the kernel with profiling enabled"
        default n
 config KERNEL_PROFILING
        bool "Compile the kernel with profiling enabled"
        default n


@@ -171,12 +221,20 @@ config KERNEL_PROFILING
                Enable the extended profiling support mechanisms used by profilers such
                as OProfile.
 
                Enable the extended profiling support mechanisms used by profilers such
                as OProfile.
 

+config KERNEL_DEBUG_FS
+       bool "Compile the kernel with Debug Filesystem enabled"
+       depends LINUX_2_6
+       default y
+       help
+               debugfs is a virtual file system that kernel developers use to put
+               debugging files into. Enable this option to be able to read and
+               write to these files.
+

 endmenu
 
 menuconfig DEVEL
        bool "Advanced configuration options (for developers)"
        default n
 endmenu
 
 menuconfig DEVEL
        bool "Advanced configuration options (for developers)"
        default n

-       select TOOLCHAINOPTS if !NATIVE_TOOLCHAIN

 
 config BROKEN
        bool
 
 config BROKEN
        bool


@@ -245,10 +303,36 @@ config KERNEL_GIT_LOCAL_REPOSITORY
                In this instance, the --refererence option of git clone will
                be used thus creating a quick local clone of your repo.
 
                In this instance, the --refererence option of git clone will
                be used thus creating a quick local clone of your repo.
 

+
+menuconfig TARGET_OPTIONS
+       bool "Target Options"  if DEVEL
+
+config TARGET_OPTIMIZATION
+       string
+       prompt "Target Optimizations" if TARGET_OPTIONS
+       default DEFAULT_TARGET_OPTIMIZATION
+       help
+         Optimizations to use when building for the target host.
+
+config SOFT_FLOAT
+       bool
+       prompt "Use software floating point by default" if TARGET_OPTIONS
+       default y
+       depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
+       help
+         If your target CPU does not have a Floating Point Unit (FPU) or a
+         kernel FPU emulator, but you still wish to support floating point
+         functions, then everything will need to be compiled with soft floating
+         point support (-msoft-float).
+
+         Most people will answer N.
+
+

 source "toolchain/Config.in"
 
 source "target/imagebuilder/Config.in"
 source "target/sdk/Config.in"
 source "toolchain/Config.in"
 
 source "target/imagebuilder/Config.in"
 source "target/sdk/Config.in"

+source "target/toolchain/Config.in"

 
 source "tmp/.config-package.in"
 
 
 source "tmp/.config-package.in"