prevent ldconfig use in autoconf based packages
[openwrt/svn-archive/archive.git] / openwrt / package / base-files / default / etc / functions.sh
index 14f5011db700ac86b15caeffb4eb19376d3d7f88..57f2734c1c4c047312e7383b2a6e534840d91591 100755 (executable)
@@ -1,28 +1,15 @@
-#!/bin/ash
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006 Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
 
 alias debug=${DEBUG:-:}
 
-# allow env to override nvram
-nvram () {
-  if [ -x /usr/sbin/nvram ]; then
-    case $1 in
-      get) eval "echo \${$2:-\$(command nvram get $2)}";;
-      *) command nvram $*;;
-    esac
-  else
-    case $1 in
-      get) eval "echo \${$2:-\${DEFAULT_$2}}";;
-      *);;
-    esac
-  fi  
-}
-
 # valid interface?
 if_valid () (
   ifconfig "$1" >&- 2>&- ||
   [ "${1%%[0-9]}" = "br" ] ||
   {
-    [ "${1%%[0-9]}" = "vlan" ] && ( 
+    [ "${1%%[0-9]*}" = "vlan" ] && ( 
       i=${1#vlan}
       hwname=$(nvram get vlan${i}hwname)
       hwaddr=$(nvram get ${hwname}macaddr)
@@ -30,6 +17,7 @@ if_valid () (
 
       vif=$(ifconfig -a | awk '/^eth.*'$hwaddr'/ {print $1; exit}' IGNORECASE=1)
       debug "# vlan$i => $vif"
+         [ -n "$vif" ] || vif=$(ifconfig -a | awk '/^eth'${hw##et}'/ {print $1; exit}' IGNORECASE=1)
 
       $DEBUG ifconfig $vif up
       $DEBUG vconfig add $vif $i 2>&-
@@ -38,26 +26,258 @@ if_valid () (
   { debug "# missing interface '$1' ignored"; false; }
 )
 
-bitcount () {
-  local c=$1
-  echo $((
-  c=((c>> 1)&0x55555555)+(c&0x55555555),
-  c=((c>> 2)&0x33333333)+(c&0x33333333),
-  c=((c>> 4)&0x0f0f0f0f)+(c&0x0f0f0f0f),
-  c=((c>> 8)&0x00ff00ff)+(c&0x00ff00ff),
-  c=((c>>16)&0x0000ffff)+(c&0x0000ffff)
-  ))
+do_ifup() {
+       ifproto="$1"
+       iftype="$2"
+       if="$(nvram get ${iftype}_ifname)"
+       [ "${if%%[0-9]}" = "ppp" ] && if="$(nvram get ${iftype}_device)"
+       
+       pidfile=/var/run/${if}.pid
+       [ -f $pidfile ] && $DEBUG kill $(cat $pidfile)
+
+       case "$ifproto" in
+       static)
+               ip=$(nvram get ${iftype}_ipaddr)
+               netmask=$(nvram get ${iftype}_netmask)
+               gateway=$(nvram get ${iftype}_gateway)
+               mtu=$(nvram get ${iftype}_mtu)
+               static_route=$(nvram get ${iftype}_static_route)
+
+               $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} ${mtu:+mtu $(($mtu))} broadcast + up
+               ${gateway:+$DEBUG route add default gw $gateway}
+
+               [ -f /tmp/resolv.conf.auto ] || {
+                       debug "# --- creating /tmp/resolv.conf.auto ---"
+                       for dns in $(nvram get ${iftype}_dns); do
+                               echo "nameserver $dns" >> /tmp/resolv.conf.auto
+                       done
+               }
+               
+               [ -n "$static_route" ] && {
+                       for route in $static_route; do {
+                       eval "set $(echo $route | sed 's/:/ /g')"
+                               if [ "$2" = "0.0.0.0" ]; then
+                                       opt="-host"
+                               fi
+                               $DEBUG route add ${opt:-"-net"} $1 netmask $2 gw $3 metric $4 
+                               unset opt
+                       } done
+               }
+
+               env -i ACTION="ifup" INTERFACE="${iftype}" PROTO=static /sbin/hotplug "iface" &
+       ;;
+       dhcp*)
+               DHCP_IP=$(nvram get ${iftype}_ipaddr)
+               DHCP_NETMASK=$(nvram get ${iftype}_netmask)
+               mtu=$(nvram get ${iftype}_mtu)
+               $DEBUG ifconfig $if $DHCP_IP ${DHCP_NETMASK:+netmask $DHCP_NETMASK} ${mtu:+mtu $(($mtu))} broadcast + up
+
+               DHCP_ARGS="-i $if ${DHCP_IP:+-r $DHCP_IP} -b -p $pidfile -t 0"
+               DHCP_HOSTNAME=$(nvram get ${iftype}_hostname)
+               DHCP_HOSTNAME=${DHCP_HOSTNAME%%.*}
+               [ -z $DHCP_HOSTNAME ] || DHCP_ARGS="$DHCP_ARGS -H $DHCP_HOSTNAME"
+               [ "$(nvram get ${iftype}_proto)" = "pptp" ] && DHCP_ARGS="$DHCP_ARGS -n -q" || DHCP_ARGS="$DHCP_ARGS -R &"
+               [ -r $pidfile ] && oldpid=$(cat $pidfile 2>&-)
+               ${DEBUG:-eval} "udhcpc $DHCP_ARGS"
+               [ -n "$oldpid" ] && pidof udhcpc | grep "$oldpid" >&- 2>&- && {
+                       sleep 1
+                       kill -9 $oldpid
+               }
+               # hotplug events are handled by /usr/share/udhcpc/default.script
+       ;;
+       none|"")
+       ;;
+       *)
+               [ -x "/sbin/ifup.$ifproto" ] && { $DEBUG /sbin/ifup.$ifproto ${iftype}; exit; }
+               echo "### ifup ${iftype}: ignored ${iftype}_proto=\"$ifproto\" (not supported)"
+       ;;
+       esac
 }
 
-valid_netmask () {
-  return $((-($1)&~$1))
+# newline
+N="
+"
+
+_C=0
+
+hotplug_dev() {
+       env -i ACTION=$1 INTERFACE=$2 /sbin/hotplug net
 }
 
-ip2int () (
-  set $(echo $1 | tr '\.' ' ')
-  echo $(($1<<24|$2<<16|$3<<8|$4))
-)
+append() {
+       local var="$1"
+       local value="$2"
+       local sep="${3:- }"
+       
+       eval "export -n -- \"$var=\${$var:+\${$var}\${value:+\$sep}}\$value\""
+}
+
+reset_cb() {
+       config_cb() { return 0; }
+       option_cb() { return 0; }
+}
+reset_cb
+
+config () {
+       local cfgtype="$1"
+       local name="$2"
+       
+       CONFIG_NUM_SECTIONS=$(($CONFIG_NUM_SECTIONS + 1))
+       name="${name:-cfg$CONFIG_NUM_SECTIONS}"
+       append CONFIG_SECTIONS "$name"
+       config_cb "$cfgtype" "$name"
+       CONFIG_SECTION="$name"
+       export -n "CONFIG_${CONFIG_SECTION}_TYPE=$cfgtype"
+}
+
+option () {
+       local varname="$1"; shift
+       local value="$*"
+       
+       export -n "CONFIG_${CONFIG_SECTION}_${varname}=$value"
+       option_cb "$varname" "$*"
+}
+
+config_rename() {
+       local OLD="$1"
+       local NEW="$2"
+       local oldvar
+       local newvar
+       
+       [ "$OLD" -a "$NEW" ] || return
+       for oldvar in `set | grep ^CONFIG_${OLD}_ | \
+               sed -e 's/\(.*\)=.*$/\1/'` ; do
+               newvar="CONFIG_${NEW}_${oldvar##CONFIG_${OLD}_}"
+               eval "export -n \"$newvar=\${$oldvar}\""
+               unset "$oldvar"
+       done
+       CONFIG_SECTIONS="$(echo " $CONFIG_SECTIONS " | sed -e "s, $OLD , $NEW ,")"
+       
+       [ "$CONFIG_SECTION" = "$OLD" ] && CONFIG_SECTION="$NEW"
+}
+
+config_unset() {
+       config_set "$1" "$2" ""
+}
+
+config_clear() {
+       local SECTION="$1"
+       local oldvar
+       
+       CONFIG_SECTIONS="$(echo " $CONFIG_SECTIONS " | sed -e "s, $OLD , ,")"
+       CONFIG_SECTIONS="${SECTION:+$CONFIG_SECTIONS}"
+
+       for oldvar in `set | grep ^CONFIG_${SECTION:+$SECTION_} | \
+               sed -e 's/\(.*\)=.*$/\1/'` ; do 
+               unset $oldvar 
+       done
+}
+
+config_load() {
+       local file="/etc/config/$1"
+       _C=0
+       CONFIG_SECTIONS=
+       CONFIG_NUM_SECTIONS=0
+       CONFIG_SECTION=
+       
+       [ -e "$file" ] && {
+               . $file
+       } || return 1
+       
+       ${CONFIG_SECTION:+config_cb}
+}
+
+config_get() {
+       case "$3" in
+               "") eval "echo \"\${CONFIG_${1}_${2}}\"";;
+               *)  eval "export -n -- \"$1=\${CONFIG_${2}_${3}}\"";;
+       esac
+}
+
+config_set() {
+       local section="$1"
+       local option="$2"
+       local value="$3"
+       export -n "CONFIG_${section}_${option}=$value"
+}
+
+config_foreach() {
+       local function="$1"
+       local section
+       
+       [ -z "$CONFIG_SECTIONS" ] && return 0
+       for section in ${CONFIG_SECTIONS}; do
+               eval "$function \"\$section\""
+       done
+}
+
+load_modules() {
+       cd /etc/modules.d
+       sed 's/^[^#]/insmod &/' $* | ash 2>&- || :
+}
+
+include() {
+       local file
+       
+       for file in $(ls $1/*.sh 2>/dev/null); do
+               . $file
+       done
+}
+
+find_mtd_part() {
+       local PART="$(grep "\"$1\"" /proc/mtd | awk -F: '{print $1}')"
+       
+       PART="${PART##mtd}"
+       echo "${PART:+/dev/mtdblock/$PART}"
+}
+
+strtok() { # <string> { <variable> [<separator>] ... }
+       local tmp
+       local val="$1"
+       local count=0
+
+       shift
+
+       while [ $# -gt 1 ]; do
+               tmp="${val%%$2*}"
+
+               [ "$tmp" = "$val" ] && break
+
+               val="${val#$tmp$2}"
+
+               export -n "$1=$tmp"; count=$((count+1))
+               shift 2
+       done
+
+       if [ $# -gt 0 -a "$val" ]; then
+               export -n "$1=$val"; count=$((count+1))
+       fi
+
+       return $count
+}
+
+set_led() {
+       local led="$1"
+       local state="$2"
+       [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
+}
 
-int2ip () {
-  echo $(($1>>24&255)).$(($1>>16&255)).$(($1>>8&255)).$(($1&255))
+set_state() {
+       case "$1" in
+               preinit)
+                       set_led dmz 1
+                       set_led diag 1
+                       set_led power 0
+               ;;
+               failsafe)
+                       set_led diag f
+                       set_led power f
+                       set_led dmz f
+               ;;
+               done)
+                       set_led dmz 0
+                       set_led diag 0
+                       set_led power 1
+               ;;
+       esac
 }