/* Control values. */
s8 i;
s8 q;
- /* "Used by hardware" flag. */
- bool used;
-#ifdef CONFIG_B43_DEBUG
- /* Is this lo-control-array entry calibrated? */
- bool calibrated;
-#endif
};
-
/* Debugging: Poison value for i and q values. */
#define B43_LOCTL_POISON 111
-/* loctl->calibrated debugging mechanism */
-#ifdef CONFIG_B43_DEBUG
-static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl,
- bool calibrated)
-{
- loctl->calibrated = calibrated;
-}
-static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl)
-{
- return loctl->calibrated;
-}
-#else
-static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl,
- bool calibrated)
-{
-}
-static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl)
-{
- return 1;
-}
-#endif
-
-/* TX Power LO Control Array.
- * Value-pairs to adjust the LocalOscillator are stored
- * in this structure.
- * There are two different set of values. One for "Flag is Set"
- * and one for "Flag is Unset".
- * By "Flag" the flag in struct b43_rfatt is meant.
- * The Value arrays are two-dimensional. The first index
- * is the baseband attenuation and the second index
- * is the radio attenuation.
- * Use b43_get_lo_g_ctl() to retrieve a value from the lists.
- */
+/* This struct holds calibrated LO settings for a set of
+ * Baseband and RF attenuation settings. */
+struct b43_lo_calib {
+ /* The set of attenuation values this set of LO
+ * control values is calibrated for. */
+ struct b43_bbatt bbatt;
+ struct b43_rfatt rfatt;
+ /* The set of control values for the LO. */
+ struct b43_loctl ctl;
+ /* The time when these settings were calibrated (in jiffies) */
+ unsigned long calib_time;
+ /* List. */
+ struct list_head list;
+};
+
+/* Size of the DC Lookup Table in 16bit words. */
+#define B43_DC_LT_SIZE 32
+
+/* Local Oscillator calibration information */
struct b43_txpower_lo_control {
-#define B43_NR_BB 12
-#define B43_NR_RF 16
- /* LO Control values, with PAD Mixer */
- struct b43_loctl with_padmix[B43_NR_BB][B43_NR_RF];
- /* LO Control values, without PAD Mixer */
- struct b43_loctl no_padmix[B43_NR_BB][B43_NR_RF];
-
- /* Flag to indicate a complete rebuild of the two tables above
- * to the LO measuring code. */
- bool rebuild;
-
- /* Lists of valid RF and BB attenuation values for this device. */
+ /* Lists of RF and BB attenuation values for this device.
+ * Used for building hardware power control tables. */
struct b43_rfatt_list rfatt_list;
struct b43_bbatt_list bbatt_list;
+ /* The DC Lookup Table is cached in memory here.
+ * Note that this is only used for Hardware Power Control. */
+ u16 dc_lt[B43_DC_LT_SIZE];
+
+ /* List of calibrated control values (struct b43_lo_calib). */
+ struct list_head calib_list;
+ /* Last time the power vector was read (jiffies). */
+ unsigned long pwr_vec_read_time;
+ /* Last time the txctl values were measured (jiffies). */
+ unsigned long txctl_measured_time;
+
/* Current TX Bias value */
u8 tx_bias;
/* Current TX Magnification Value (if used by the device) */
u8 tx_magn;
- /* GPHY LO is measured. */
- bool lo_measured;
-
/* Saved device PowerVector */
u64 power_vector;
};
-/* Measure the BPHY Local Oscillator. */
-void b43_lo_b_measure(struct b43_wldev *dev);
-/* Measure the BPHY/GPHY Local Oscillator. */
-void b43_lo_g_measure(struct b43_wldev *dev);
+/* Calibration expire timeouts.
+ * Timeouts must be multiple of 15 seconds. To make sure
+ * the item really expired when the 15 second timer hits, we
+ * subtract two additional seconds from the timeout. */
+#define B43_LO_CALIB_EXPIRE (HZ * (30 - 2))
+#define B43_LO_PWRVEC_EXPIRE (HZ * (30 - 2))
+#define B43_LO_TXCTL_EXPIRE (HZ * (180 - 4))
+
/* Adjust the Local Oscillator to the saved attenuation
* and txctl values.
void b43_lo_g_adjust_to(struct b43_wldev *dev,
u16 rfatt, u16 bbatt, u16 tx_control);
-/* Mark all possible b43_lo_g_ctl as "unused" */
-void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev);
-/* Mark the b43_lo_g_ctl corresponding to the current
- * attenuation values as used.
- */
-void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev);
+void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all);
-/* Get a reference to a LO Control value pair in the
- * TX Power LO Control Array.
- */
-struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev,
- const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt);
+void b43_lo_g_maintanance_work(struct b43_wldev *dev);
+void b43_lo_g_cleanup(struct b43_wldev *dev);
+void b43_lo_g_init(struct b43_wldev *dev);
#endif /* B43_LO_H_ */
projects / openwrt / svn-archive / archive.git / blobdiff