-#!/bin/sh
-# Copyright (C) 2011 OpenWrt.org
+#!/bin/ash
-UCIDEF_LEDS_CHANGED=0
+CFG=/etc/board.json
-ucidef_set_led_netdev() {
- local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local dev=$4
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+json_select_array() {
+ local _json_no_warning=1
+
+ json_select "$1"
+ [ $? = 0 ] && return
+
+ json_add_array "$1"
+ json_close_array
+
+ json_select "$1"
+}
- uci -q get system.$cfg && return 0
+json_select_object() {
+ local _json_no_warning=1
+
+ json_select "$1"
+ [ $? = 0 ] && return
+
+ json_add_object "$1"
+ json_close_object
+
+ json_select "$1"
+}
+
+_ucidef_set_interface() {
+ local name="$1"
+ local iface="$2"
+ local proto="$3"
+
+ json_select_object "$name"
+ json_add_string ifname "$iface"
+
+ if ! json_is_a protocol string; then
+ case "$proto" in
+ static|dhcp|none|pppoe) : ;;
+ *)
+ case "$name" in
+ lan) proto="static" ;;
+ wan) proto="dhcp" ;;
+ *) proto="none" ;;
+ esac
+ ;;
+ esac
+
+ json_add_string protocol "$proto"
+ fi
+
+ json_select ..
+}
+
+ucidef_set_board_id() {
+ json_select_object model
+ json_add_string id "$1"
+ json_select ..
+}
+
+ucidef_set_model_name() {
+ json_select_object model
+ json_add_string name "$1"
+ json_select ..
+}
+
+ucidef_set_interface_lan() {
+ json_select_object network
+ _ucidef_set_interface lan "$@"
+ json_select ..
+}
+
+ucidef_set_interface_wan() {
+ json_select_object network
+ _ucidef_set_interface wan "$@"
+ json_select ..
+}
+
+ucidef_set_interfaces_lan_wan() {
+ local lan_if="$1"
+ local wan_if="$2"
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.trigger='netdev'
-set system.$cfg.dev='$dev'
-set system.$cfg.mode='link tx rx'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ json_select_object network
+ _ucidef_set_interface lan "$lan_if"
+ _ucidef_set_interface wan "$wan_if"
+ json_select ..
+}
+
+ucidef_set_interface_raw() {
+ json_select_object network
+ _ucidef_set_interface "$@"
+ json_select ..
+}
+
+_ucidef_add_switch_port() {
+ # inherited: $num $device $need_tag $role $index $prev_role
+ # inherited: $n_cpu $n_ports $n_vlan $cpu0 $cpu1 $cpu2 $cpu3 $cpu4 $cpu5
+
+ n_ports=$((n_ports + 1))
+
+ json_select_array ports
+ json_add_object
+ json_add_int num "$num"
+ [ -n "$device" ] && json_add_string device "$device"
+ [ -n "$need_tag" ] && json_add_boolean need_tag "$need_tag"
+ [ -n "$role" ] && json_add_string role "$role"
+ [ -n "$index" ] && json_add_int index "$index"
+ json_close_object
+ json_select ..
+
+ # record pointer to cpu entry for lookup in _ucidef_finish_switch_roles()
+ [ -n "$device" ] && {
+ export "cpu$n_cpu=$n_ports"
+ n_cpu=$((n_cpu + 1))
+ }
+
+ # create/append object to role list
+ [ -n "$role" ] && {
+ json_select_array roles
+
+ if [ "$role" != "$prev_role" ]; then
+ json_add_object
+ json_add_string role "$role"
+ json_add_string ports "$num"
+ json_close_object
+
+ prev_role="$role"
+ n_vlan=$((n_vlan + 1))
+ else
+ json_select_object "$n_vlan"
+ json_get_var port ports
+ json_add_string ports "$port $num"
+ json_select ..
+ fi
+
+ json_select ..
+ }
+}
+
+_ucidef_finish_switch_roles() {
+ # inherited: $name $n_cpu $n_vlan $cpu0 $cpu1 $cpu2 $cpu3 $cpu4 $cpu5
+ local index role roles num device need_tag port ports
+
+ json_select switch
+ json_select "$name"
+ json_get_keys roles roles
+ json_select ..
+ json_select ..
+
+ for index in $roles; do
+ eval "port=\$cpu$(((index - 1) % n_cpu))"
+
+ json_select switch
+ json_select "$name"
+ json_select ports
+ json_select "$port"
+ json_get_vars num device need_tag
+ json_select ..
+ json_select ..
+
+ if [ $n_vlan -gt $n_cpu -o ${need_tag:-0} -eq 1 ]; then
+ num="${num}t"
+ device="${device}.${index}"
+ fi
+
+ json_select roles
+ json_select "$index"
+ json_get_vars role ports
+ json_add_string ports "$ports $num"
+ json_add_string device "$device"
+ json_select ..
+ json_select ..
+ json_select ..
+ json_select ..
+
+ json_select_object network
+ local devices
+
+ json_select_object "$role"
+ # attach previous interfaces (for multi-switch devices)
+ json_get_var devices ifname
+ if ! list_contains devices "$device"; then
+ devices="${devices:+$devices }$device"
+ fi
+ json_select ..
+
+ _ucidef_set_interface "$role" "$devices"
+ json_select ..
+ done
+}
+
+ucidef_add_switch() {
+ local name="$1"; shift
+ local port num role device index need_tag prev_role
+ local cpu0 cpu1 cpu2 cpu3 cpu4 cpu5
+ local n_cpu=0 n_vlan=0 n_ports=0
+
+ json_select_object switch
+ json_select_object "$name"
+ json_add_boolean enable 1
+ json_add_boolean reset 1
+
+ for port in "$@"; do
+ case "$port" in
+ [0-9]*@*)
+ num="${port%%@*}"
+ device="${port##*@}"
+ need_tag=0
+ [ "${num%t}" != "$num" ] && {
+ num="${num%t}"
+ need_tag=1
+ }
+ ;;
+ [0-9]*:*:[0-9]*)
+ num="${port%%:*}"
+ index="${port##*:}"
+ role="${port#[0-9]*:}"; role="${role%:*}"
+ ;;
+ [0-9]*:*)
+ num="${port%%:*}"
+ role="${port##*:}"
+ ;;
+ esac
+
+ if [ -n "$num" ] && [ -n "$device$role" ]; then
+ _ucidef_add_switch_port
+ fi
+
+ unset num device role index need_tag
+ done
+ json_select ..
+ json_select ..
+
+ _ucidef_finish_switch_roles
+}
+
+ucidef_add_switch_attr() {
+ local name="$1"
+ local key="$2"
+ local val="$3"
+
+ json_select_object switch
+ json_select_object "$name"
+
+ case "$val" in
+ true|false) [ "$val" != "true" ]; json_add_boolean "$key" $? ;;
+ [0-9]) json_add_int "$key" "$val" ;;
+ *) json_add_string "$key" "$val" ;;
+ esac
+
+ json_select ..
+ json_select ..
+}
+
+ucidef_add_switch_port_attr() {
+ local name="$1"
+ local port="$2"
+ local key="$3"
+ local val="$4"
+ local ports i num
+
+ json_select_object switch
+ json_select_object "$name"
+
+ json_get_keys ports ports
+ json_select_array ports
+
+ for i in $ports; do
+ json_select "$i"
+ json_get_var num num
+
+ if [ -n "$num" ] && [ $num -eq $port ]; then
+ json_select_object attr
+
+ case "$val" in
+ true|false) [ "$val" != "true" ]; json_add_boolean "$key" $? ;;
+ [0-9]) json_add_int "$key" "$val" ;;
+ *) json_add_string "$key" "$val" ;;
+ esac
+
+ json_select ..
+ fi
+
+ json_select ..
+ done
+
+ json_select ..
+ json_select ..
+ json_select ..
+}
+
+ucidef_set_interface_macaddr() {
+ local network="$1"
+ local macaddr="$2"
+
+ json_select_object network
+
+ json_select "$network"
+ [ $? -eq 0 ] || {
+ json_select ..
+ return
+ }
+
+ json_add_string macaddr "$macaddr"
+ json_select ..
+
+ json_select ..
+}
+
+ucidef_add_atm_bridge() {
+ local vpi="$1"
+ local vci="$2"
+ local encaps="$3"
+ local payload="$4"
+
+ json_select_object dsl
+ json_select_object atmbridge
+ json_add_int vpi "$vpi"
+ json_add_int vci "$vci"
+ json_add_string encaps "$encaps"
+ json_add_string payload "$payload"
+ json_select ..
+ json_select ..
+}
+
+ucidef_add_adsl_modem() {
+ local annex="$1"
+ local firmware="$2"
+
+ json_select_object dsl
+ json_select_object modem
+ json_add_string type "adsl"
+ json_add_string annex "$annex"
+ json_add_string firmware "$firmware"
+ json_select ..
+ json_select ..
+}
+
+ucidef_add_vdsl_modem() {
+ local annex="$1"
+ local tone="$2"
+ local xfer_mode="$3"
+
+ json_select_object dsl
+ json_select_object modem
+ json_add_string type "vdsl"
+ json_add_string annex "$annex"
+ json_add_string tone "$tone"
+ json_add_string xfer_mode "$xfer_mode"
+ json_select ..
+ json_select ..
+}
+
+ucidef_set_led_netdev() {
+ local cfg="led_$1"
+ local name="$2"
+ local sysfs="$3"
+ local dev="$4"
+ local mode="${5:-link tx rx}"
+
+ json_select_object led
+
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string type netdev
+ json_add_string sysfs "$sysfs"
+ json_add_string device "$dev"
+ json_add_string mode "$mode"
+ json_select ..
+
+ json_select ..
}
ucidef_set_led_usbdev() {
local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local dev=$4
+ local name="$2"
+ local sysfs="$3"
+ local dev="$4"
- uci -q get system.$cfg && return 0
+ json_select_object led
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.trigger='usbdev'
-set system.$cfg.dev='$dev'
-set system.$cfg.interval='50'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string type usb
+ json_add_string sysfs "$sysfs"
+ json_add_string device "$dev"
+ json_select ..
+
+ json_select ..
}
ucidef_set_led_wlan() {
local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local trigger=$4
+ local name="$2"
+ local sysfs="$3"
+ local trigger="$4"
+
+ json_select_object led
- uci -q get system.$cfg && return 0
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string type trigger
+ json_add_string sysfs "$sysfs"
+ json_add_string trigger "$trigger"
+ json_select ..
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.trigger='$trigger'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ json_select ..
}
ucidef_set_led_switch() {
local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local trigger=$4
- local port_mask=$5
-
- uci -q get system.$cfg && return 0
-
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.trigger='$trigger'
-set system.$cfg.port_mask='$port_mask'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ local name="$2"
+ local sysfs="$3"
+ local trigger="$4"
+ local port_mask="$5"
+ local speed_mask="$6"
+
+ json_select_object led
+
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string type switch
+ json_add_string sysfs "$sysfs"
+ json_add_string trigger "$trigger"
+ json_add_string port_mask "$port_mask"
+ json_add_string speed_mask "$speed_mask"
+ json_select ..
+
+ json_select ..
}
ucidef_set_led_default() {
local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local default=$4
+ local name="$2"
+ local sysfs="$3"
+ local default="$4"
+
+ json_select_object led
- uci -q get system.$cfg && return 0
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string sysfs "$sysfs"
+ json_add_string default "$default"
+ json_select ..
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.default='$default'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ json_select ..
}
-ucidef_set_led_rssi() {
+ucidef_set_led_gpio() {
local cfg="led_$1"
- local name=$2
- local sysfs=$3
- local iface=$4
- local minq=$5
- local maxq=$6
- local offset=$7
- local factor=$8
-
- uci -q get system.$cfg && return 0
-
- uci batch <<EOF
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.trigger='rssi'
-set system.$cfg.iface='rssid_$iface'
-set system.$cfg.minq='$minq'
-set system.$cfg.maxq='$maxq'
-set system.$cfg.offset='$offset'
-set system.$cfg.factor='$factor'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ local name="$2"
+ local sysfs="$3"
+ local gpio="$4"
+ local inverted="$5"
+
+ json_select_object led
+
+ json_select_object "$1"
+ json_add_string type gpio
+ json_add_string name "$name"
+ json_add_string sysfs "$sysfs"
+ json_add_string trigger "$trigger"
+ json_add_int gpio "$gpio"
+ json_add_boolean inverted "$inverted"
+ json_select ..
+
+ json_select ..
}
-ucidef_set_rssimon() {
- local dev="$1"
- local refresh="$2"
- local threshold="$3"
+ucidef_set_led_ide() {
+ local cfg="led_$1"
+ local name="$2"
+ local sysfs="$3"
- local cfg="rssid_$dev"
+ json_select_object led
- uci -q get system.$cfg && return 0
+ json_select_object "$1"
+ json_add_string name "$name"
+ json_add_string sysfs "$sysfs"
+ json_add_string trigger ide-disk
+ json_select ..
- uci batch <<EOF
-set system.$cfg='rssid'
-set system.$cfg.dev='$dev'
-set system.$cfg.refresh='$refresh'
-set system.$cfg.threshold='$threshold'
-EOF
- UCIDEF_LEDS_CHANGED=1
+ json_select ..
}
-ucidef_commit_leds()
-{
- [ "$UCIDEF_LEDS_CHANGED" == "1" ] && uci commit system
+__ucidef_set_led_timer() {
+ local cfg="led_$1"
+ local name="$2"
+ local sysfs="$3"
+ local trigger="$4"
+ local delayon="$5"
+ local delayoff="$6"
+
+ json_select_object led
+
+ json_select_object "$1"
+ json_add_string type "$trigger"
+ json_add_string name "$name"
+ json_add_string sysfs "$sysfs"
+ json_add_int delayon "$delayon"
+ json_add_int delayoff "$delayoff"
+ json_select ..
+
+ json_select ..
}
-ucidef_set_interface_loopback() {
- uci batch <<EOF
-set network.loopback='interface'
-set network.loopback.ifname='lo'
-set network.loopback.proto='static'
-set network.loopback.ipaddr='127.0.0.1'
-set network.loopback.netmask='255.0.0.0'
-set network.globals='globals'
-set network.globals.ula_prefix='auto'
-EOF
+ucidef_set_led_oneshot() {
+ __ucidef_set_led_timer $1 $2 $3 "oneshot" $4 $5
}
-ucidef_set_interface_raw() {
- local cfg=$1
- local ifname=$2
-
- uci batch <<EOF
-set network.$cfg='interface'
-set network.$cfg.ifname='$ifname'
-set network.$cfg.proto='none'
-EOF
+ucidef_set_led_timer() {
+ __ucidef_set_led_timer $1 $2 $3 "timer" $4 $5
}
-ucidef_set_interface_lan() {
- local ifname=$1
-
- uci batch <<EOF
-set network.lan='interface'
-set network.lan.ifname='$ifname'
-set network.lan.type='bridge'
-set network.lan.proto='static'
-set network.lan.ipaddr='192.168.1.1'
-set network.lan.netmask='255.255.255.0'
-set network.lan.ip6assign='60'
-EOF
+ucidef_set_led_rssi() {
+ local cfg="led_$1"
+ local name="$2"
+ local sysfs="$3"
+ local iface="$4"
+ local minq="$5"
+ local maxq="$6"
+ local offset="$7"
+ local factor="$8"
+
+ json_select_object led
+
+ json_select_object "$1"
+ json_add_string type rssi
+ json_add_string name "$name"
+ json_add_string iface "$iface"
+ json_add_string sysfs "$sysfs"
+ json_add_string minq "$minq"
+ json_add_string maxq "$maxq"
+ json_add_string offset "$offset"
+ json_add_string factor "$factor"
+ json_select ..
+
+ json_select ..
}
-ucidef_set_interface_wan() {
- local ifname=$1
+ucidef_set_rssimon() {
+ local dev="$1"
+ local refresh="$2"
+ local threshold="$3"
- uci batch <<EOF
-set network.wan='interface'
-set network.wan.ifname='$ifname'
-set network.wan.proto='dhcp'
-set network.wan6='interface'
-set network.wan6.ifname='@wan'
-set network.wan6.proto='dhcpv6'
-EOF
-}
+ json_select_object rssimon
-ucidef_set_interfaces_lan_wan() {
- local lan_ifname=$1
- local wan_ifname=$2
+ json_select_object "$dev"
+ [ -n "$refresh" ] && json_add_int refresh "$refresh"
+ [ -n "$threshold" ] && json_add_int threshold "$threshold"
+ json_select ..
- ucidef_set_interface_lan "$lan_ifname"
- ucidef_set_interface_wan "$wan_ifname"
-}
+ json_select ..
-ucidef_set_interface_macaddr() {
- local ifname=$1
- local mac=$2
+}
- uci batch <<EOF
-set network.$ifname.macaddr='$mac'
-EOF
+ucidef_add_gpio_switch() {
+ local cfg="$1"
+ local name="$2"
+ local pin="$3"
+ local default="${4:-0}"
+
+ json_select_object gpioswitch
+ json_select_object "$cfg"
+ json_add_string name "$name"
+ json_add_int pin "$pin"
+ json_add_int default "$default"
+ json_select ..
+ json_select ..
}
-ucidef_add_switch() {
- local name=$1
- local reset=$2
- local enable=$3
- uci batch <<EOF
-add network switch
-set network.@switch[-1].name='$name'
-set network.@switch[-1].reset='$reset'
-set network.@switch[-1].enable_vlan='$enable'
-EOF
-}
-
-ucidef_add_switch_vlan() {
- local device=$1
- local vlan=$2
- local ports=$3
- uci batch <<EOF
-add network switch_vlan
-set network.@switch_vlan[-1].device='$device'
-set network.@switch_vlan[-1].vlan='$vlan'
-set network.@switch_vlan[-1].ports='$ports'
-EOF
+board_config_update() {
+ json_init
+ [ -f ${CFG} ] && json_load "$(cat ${CFG})"
+
+ # auto-initialize model id and name if applicable
+ if ! json_is_a model object; then
+ json_select_object model
+ [ -f "/tmp/sysinfo/board_name" ] && \
+ json_add_string id "$(cat /tmp/sysinfo/board_name)"
+ [ -f "/tmp/sysinfo/model" ] && \
+ json_add_string name "$(cat /tmp/sysinfo/model)"
+ json_select ..
+ fi
}
+board_config_flush() {
+ json_dump -i > /tmp/.board.json
+ mv /tmp/.board.json ${CFG}
+}
projects / openwrt / svn-archive / archive.git / blobdiff