bcm43xx_write16(dev, BCM43xx_MMIO_PHY_DATA, val);
}
+static void bcm43xx_radio_set_txpower_a(struct bcm43xx_wldev *dev, u16 txpower);
+
+/* Adjust the transmission power output (G-PHY) */
+void bcm43xx_set_txpower_g(struct bcm43xx_wldev *dev,
+ const struct bcm43xx_bbatt *bbatt,
+ const struct bcm43xx_rfatt *rfatt,
+ u8 tx_control)
+{
+ struct bcm43xx_phy *phy = &dev->phy;
+ struct bcm43xx_txpower_lo_control *lo = phy->lo_control;
+ u16 bb, rf;
+ u16 tx_bias, tx_magn;
+
+ bb = bbatt->att;
+ rf = rfatt->att;
+ tx_bias = lo->tx_bias;
+ tx_magn = lo->tx_magn;
+ if (unlikely(tx_bias == 0xFF))
+ tx_bias = 0;
+
+ /* Save the values for later */
+ phy->tx_control = tx_control;
+ memcpy(&phy->rfatt, rfatt, sizeof(*rfatt));
+ memcpy(&phy->bbatt, bbatt, sizeof(*bbatt));
+
+ if (bcm43xx_debug(dev, BCM43xx_DBG_XMITPOWER)) {
+ dprintk(KERN_DEBUG PFX "Tuning TX-power to bbatt(%u), "
+ "rfatt(%u), tx_control(0x%02X), "
+ "tx_bias(0x%02X), tx_magn(0x%02X)\n",
+ bb, rf, tx_control, tx_bias, tx_magn);
+ }
+
+ bcm43xx_phy_set_baseband_attenuation(dev, bb);
+ bcm43xx_shm_write16(dev, BCM43xx_SHM_SHARED, BCM43xx_SHM_SH_RFATT, rf);
+ if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) {
+ bcm43xx_radio_write16(dev, 0x43,
+ (rf & 0x000F) | (tx_control & 0x0070));
+ } else {
+ bcm43xx_radio_write16(dev, 0x43,
+ (bcm43xx_radio_read16(dev, 0x43)
+ & 0xFFF0) | (rf & 0x000F));
+ bcm43xx_radio_write16(dev, 0x52,
+ (bcm43xx_radio_read16(dev, 0x52)
+ & ~0x0070) | (tx_control & 0x0070));
+ }
+ if (has_tx_magnification(phy)) {
+ bcm43xx_radio_write16(dev, 0x52, tx_magn | tx_bias);
+ } else {
+ bcm43xx_radio_write16(dev, 0x52,
+ (bcm43xx_radio_read16(dev, 0x52)
+ & 0xFFF0) | (tx_bias & 0x000F));
+ }
+ if (phy->type == BCM43xx_PHYTYPE_G)
+ bcm43xx_lo_g_adjust(dev);
+}
+
+static void default_baseband_attenuation(struct bcm43xx_wldev *dev,
+ struct bcm43xx_bbatt *bb)
+{
+ struct bcm43xx_phy *phy = &dev->phy;
+
+ if (phy->radio_ver == 0x2050 && phy->radio_rev < 6)
+ bb->att = 0;
+ else
+ bb->att = 2;
+}
+
+static void default_radio_attenuation(struct bcm43xx_wldev *dev,
+ struct bcm43xx_rfatt *rf)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct bcm43xx_phy *phy = &dev->phy;
+
+ rf->with_padmix = 0;
+
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BCM4309G) {
+ if (bus->boardinfo.rev < 0x43) {
+ rf->att = 2;
+ return;
+ } else if (bus->boardinfo.rev < 0x51) {
+ rf->att = 3;
+ return;
+ }
+ }
+
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ rf->att = 0x60;
+ return;
+ }
+
+ switch (phy->radio_ver) {
+ case 0x2053:
+ switch (phy->radio_rev) {
+ case 1:
+ rf->att = 6;
+ return;
+ }
+ break;
+ case 0x2050:
+ switch (phy->radio_rev) {
+ case 0:
+ rf->att = 5;
+ return;
+ case 1:
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BCM4309G &&
+ bus->boardinfo.rev >= 30)
+ rf->att = 3;
+ else if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BU4306)
+ rf->att = 3;
+ else
+ rf->att = 1;
+ } else {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BCM4309G &&
+ bus->boardinfo.rev >= 30)
+ rf->att = 7;
+ else
+ rf->att = 6;
+ }
+ return;
+ case 2:
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BCM4309G &&
+ bus->boardinfo.rev >= 30)
+ rf->att = 3;
+ else if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BU4306)
+ rf->att = 5;
+ else if (bus->chip_id == 0x4320)
+ rf->att = 4;
+ else
+ rf->att = 3;
+ } else
+ rf->att = 6;
+ return;
+ case 3:
+ rf->att = 5;
+ return;
+ case 4:
+ case 5:
+ rf->att = 1;
+ return;
+ case 6:
+ case 7:
+ rf->att = 5;
+ return;
+ case 8:
+ rf->att = 0xA;
+ rf->with_padmix = 1;
+ return;
+ case 9:
+ default:
+ rf->att = 5;
+ return;
+ }
+ }
+ rf->att = 5;
+}
+
+static u16 default_tx_control(struct bcm43xx_wldev *dev)
+{
+ struct bcm43xx_phy *phy = &dev->phy;
+
+ if (phy->radio_ver != 0x2050)
+ return 0;
+ if (phy->radio_rev == 1)
+ return BCM43xx_TXCTL_PA2DB | BCM43xx_TXCTL_TXMIX;
+ if (phy->radio_rev < 6)
+ return BCM43xx_TXCTL_PA2DB;
+ if (phy->radio_rev == 8)
+ return BCM43xx_TXCTL_TXMIX;
+ return 0;
+}
+
/* This func is called "PHY calibrate" in the specs... */
void bcm43xx_phy_early_init(struct bcm43xx_wldev *dev)
{
struct bcm43xx_phy *phy = &dev->phy;
struct bcm43xx_txpower_lo_control *lo = phy->lo_control;
+ default_baseband_attenuation(dev, &phy->bbatt);
+ default_radio_attenuation(dev, &phy->rfatt);
+ phy->tx_control = (default_tx_control(dev) << 4);
+
bcm43xx_read32(dev, BCM43xx_MMIO_STATUS_BITFIELD); /* Dummy read. */
if (phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G) {
{
struct ssb_bus *bus = dev->dev->bus;
struct bcm43xx_phy *phy = &dev->phy;
+ struct bcm43xx_rfatt old_rfatt;
+ struct bcm43xx_bbatt old_bbatt;
+ u8 old_tx_control = 0;
- if ((bus->board_vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->board_type == SSB_BOARD_BU4306))
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type == SSB_BOARD_BU4306))
return;
bcm43xx_phy_write(dev, 0x0028, 0x8018);
(bcm43xx_radio_read16(dev, 0x0076)
& 0x00F7) | 0x0084);
} else {
- if (phy->radio_rev == 8)
- bcm43xx_radio_set_txpower_bg(dev, 0xB, 0x1F, 0);
- else
- bcm43xx_radio_set_txpower_bg(dev, 0xB, 9, 0);
+ struct bcm43xx_rfatt rfatt;
+ struct bcm43xx_bbatt bbatt;
+
+ memcpy(&old_rfatt, &phy->rfatt, sizeof(old_rfatt));
+ memcpy(&old_bbatt, &phy->bbatt, sizeof(old_bbatt));
+ old_tx_control = phy->tx_control;
+
+ bbatt.att = 11;
+ if (phy->radio_rev == 8) {
+ rfatt.att = 15;
+ rfatt.with_padmix = 1;
+ } else {
+ rfatt.att = 9;
+ rfatt.with_padmix = 0;
+ }
+ bcm43xx_set_txpower_g(dev, &bbatt, &rfatt, 0);
}
bcm43xx_dummy_transmission(dev);
phy->cur_idle_tssi = bcm43xx_phy_read(dev, BCM43xx_PHY_ITSSI);
phy->cur_idle_tssi = 0;
}
}
-
if (phy->radio_ver == 0x2050 && phy->analog == 0) {
bcm43xx_radio_write16(dev, 0x0076,
bcm43xx_radio_read16(dev, 0x0076)
& 0xFF7B);
- } else
- bcm43xx_radio_set_txpower_bg(dev, -1, -1, -1);
+ } else {
+ bcm43xx_set_txpower_g(dev, &old_bbatt,
+ &old_rfatt, old_tx_control);
+ }
}
bcm43xx_hardware_pctl_init(dev);
bcm43xx_shm_clear_tssi(dev);
if (phy->rev == 1) {
for (i = 0; i < BCM43xx_TAB_RETARD_SIZE; i++)
bcm43xx_ofdmtab_write32(dev, 0x2400, i, bcm43xx_tab_retard[i]);
- for (i = 0; i < 4; i++) {
- bcm43xx_ofdmtab_write16(dev, 0x5404, i, 0x0020);
- bcm43xx_ofdmtab_write16(dev, 0x5408, i, 0x0020);
- bcm43xx_ofdmtab_write16(dev, 0x540C, i, 0x0020);
- bcm43xx_ofdmtab_write16(dev, 0x5410, i, 0x0020);
- }
+ for (i = 4; i < 20; i++)
+ bcm43xx_ofdmtab_write16(dev, 0x5400, i, 0x0020);
bcm43xx_phy_agcsetup(dev);
- if ((bus->board_vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->board_type == SSB_BOARD_BU4306) &&
- (bus->board_rev == 0x17))
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type == SSB_BOARD_BU4306) &&
+ (bus->boardinfo.rev == 0x17))
return;
bcm43xx_ofdmtab_write16(dev, 0x5001, 0, 0x0002);
bcm43xx_ofdmtab_write16(dev, 0x5002, 0, 0x0001);
} else {
- for (i = 0; i <= 0x2F; i++)
+ for (i = 0; i < 0x20; i++)
bcm43xx_ofdmtab_write16(dev, 0x1000, i, 0x0820);
bcm43xx_phy_agcsetup(dev);
bcm43xx_phy_read(dev, 0x0400); /* dummy read */
bcm43xx_ofdmtab_write16(dev, 0x3C02, 0, 0x000F);
bcm43xx_ofdmtab_write16(dev, 0x3C03, 0, 0x0014);
- if ((bus->board_vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->board_type == SSB_BOARD_BU4306) &&
- (bus->board_rev == 0x17))
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type == SSB_BOARD_BU4306) &&
+ (bus->boardinfo.rev == 0x17))
return;
bcm43xx_ofdmtab_write16(dev, 0x0401, 0, 0x0002);
struct bcm43xx_phy *phy = &dev->phy;
u16 tval;
+ might_sleep();
+
if (phy->type == BCM43xx_PHYTYPE_A) {
bcm43xx_phy_setupa(dev);
} else {
bcm43xx_phy_read(dev, BCM43xx_PHY_A_CRS) | (1 << 14));
bcm43xx_radio_init2060(dev);
- if ((bus->board_vendor == SSB_BOARDVENDOR_BCM) &&
- ((bus->board_type == SSB_BOARD_BU4306) ||
- (bus->board_type == SSB_BOARD_BU4309))) {
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ ((bus->boardinfo.type == SSB_BOARD_BU4306) ||
+ (bus->boardinfo.type == SSB_BOARD_BU4309))) {
if (phy->lofcal == 0xFFFF) {
TODO();//TODO: LOF Cal
bcm43xx_radio_set_tx_iq(dev);
bcm43xx_phy_write(dev, 0x002A, 0x88A3);
if (phy->radio_ver != 0x2050)
bcm43xx_phy_write(dev, 0x002A, 0x88C2);
- bcm43xx_radio_set_txpower_bg(dev, -1, -1, -1);
+ bcm43xx_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
bcm43xx_phy_init_pctl(dev);
}
bcm43xx_phy_write(dev, 0x002A, 0x88A3);
if (phy->radio_ver == 0x2050)
bcm43xx_phy_write(dev, 0x002A, 0x88C2);
- bcm43xx_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF);
+ bcm43xx_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
if (dev->dev->bus->sprom.r1.boardflags_lo & BCM43xx_BFL_RSSI) {
bcm43xx_calc_nrssi_slope(dev);
bcm43xx_calc_nrssi_threshold(dev);
bcm43xx_radio_read16(dev, 0x007A)
| 0x0050);
}
- if ((bus->board_vendor != SSB_BOARDVENDOR_BCM) &&
- (bus->board_type != SSB_BOARD_BU4306)) {
+ if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type != SSB_BOARD_BU4306)) {
value = 0x2120;
for (offset = 0x00A8 ; offset < 0x00C7; offset++) {
bcm43xx_phy_write(dev, offset, value);
bcm43xx_phy_write(dev, 0x0032, 0x00CA);
bcm43xx_phy_write(dev, 0x002A, 0x88A3);
- bcm43xx_radio_set_txpower_bg(dev, -1, -1, -1);
+ bcm43xx_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
if (phy->radio_ver == 0x2050)
bcm43xx_radio_write16(dev, 0x005D, 0x000D);
else
bcm43xx_phy_write(dev, 0x2A, 0x8AC0);
bcm43xx_phy_write(dev, 0x0038, 0x0668);
- bcm43xx_radio_set_txpower_bg(dev, -1, -1, -1);
+ bcm43xx_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
if (phy->radio_rev <= 5) {
bcm43xx_phy_write(dev, 0x5D,
(bcm43xx_phy_read(dev, 0x5D)
backup_phy[13] = bcm43xx_phy_read(dev, BCM43xx_PHY_BASE(0x2B));
backup_phy[14] = bcm43xx_phy_read(dev, BCM43xx_PHY_PGACTL);
backup_phy[15] = bcm43xx_phy_read(dev, BCM43xx_PHY_LO_LEAKAGE);
- backup_bband = phy->bbatt;
+ backup_bband = phy->bbatt.att;
backup_radio[0] = bcm43xx_radio_read16(dev, 0x52);
backup_radio[1] = bcm43xx_radio_read16(dev, 0x43);
backup_radio[2] = bcm43xx_radio_read16(dev, 0x7A);
u16 baseband_attenuation)
{
struct bcm43xx_phy *phy = &dev->phy;
- u16 value;
if (phy->analog == 0) {
- value = (bcm43xx_read16(dev, 0x03E6) & 0xFFF0);
- value |= (baseband_attenuation & 0x000F);
- bcm43xx_write16(dev, 0x03E6, value);
- return;
- }
-
- if (phy->analog > 1) {
- value = bcm43xx_phy_read(dev, 0x0060) & ~0x003C;
- value |= (baseband_attenuation << 2) & 0x003C;
+ bcm43xx_write16(dev, BCM43xx_MMIO_PHY0,
+ (bcm43xx_read16(dev, BCM43xx_MMIO_PHY0)
+ & 0xFFF0) | baseband_attenuation);
+ } else if (phy->analog == 1) {
+ bcm43xx_phy_write(dev, BCM43xx_PHY_DACCTL,
+ (bcm43xx_phy_read(dev, BCM43xx_PHY_DACCTL)
+ & 0xFFC3) | (baseband_attenuation << 2));
} else {
- value = bcm43xx_phy_read(dev, 0x0060) & ~0x0078;
- value |= (baseband_attenuation << 3) & 0x0078;
+ bcm43xx_phy_write(dev, BCM43xx_PHY_DACCTL,
+ (bcm43xx_phy_read(dev, BCM43xx_PHY_DACCTL)
+ & 0xFF87) | (baseband_attenuation << 3));
}
- bcm43xx_phy_write(dev, 0x0060, value);
}
/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
return dbm;
}
-static void put_attenuation_into_ranges(struct bcm43xx_wldev *dev,
- int *_rfatt, int *_bbatt)
+void bcm43xx_put_attenuation_into_ranges(struct bcm43xx_wldev *dev,
+ int *_bbatt, int *_rfatt)
{
int rfatt = *_rfatt;
int bbatt = *_bbatt;
+ struct bcm43xx_txpower_lo_control *lo = dev->phy.lo_control;
/* Get baseband and radio attenuation values into their permitted ranges.
* Radio attenuation affects power level 4 times as much as baseband. */
/* Range constants */
- const int rf_min = 0;
- const int rf_max = 9;
- const int bb_min = 0;
- const int bb_max = 11;
+ const int rf_min = lo->rfatt_list.min_val;
+ const int rf_max = lo->rfatt_list.max_val;
+ const int bb_min = lo->bbatt_list.min_val;
+ const int bb_max = lo->bbatt_list.max_val;
while (1) {
if (rfatt > rf_max &&
if (phy->cur_idle_tssi == 0)
return;
- if ((bus->board_vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->board_type == SSB_BOARD_BU4306))
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type == SSB_BOARD_BU4306))
return;
+#ifdef CONFIG_BCM43XX_MAC80211_DEBUG
+ if (phy->manual_txpower_control)
+ return;
+#endif
switch (phy->type) {
case BCM43xx_PHYTYPE_A: {
case BCM43xx_PHYTYPE_B:
case BCM43xx_PHYTYPE_G: {
u16 tmp;
- u16 txpower;
s8 v0, v1, v2, v3;
s8 average;
- u8 max_pwr;
- s16 desired_pwr, estimated_pwr, pwr_adjust;
- int radio_att_delta, baseband_att_delta;
- int radio_attenuation, baseband_attenuation;
+ int max_pwr;
+ int desired_pwr, estimated_pwr, pwr_adjust;
+ int rfatt_delta, bbatt_delta;
+ int rfatt, bbatt;
+ u8 tx_control;
unsigned long phylock_flags;
tmp = bcm43xx_shm_read16(dev, BCM43xx_SHM_SHARED, 0x0058);
estimated_pwr = bcm43xx_phy_estimate_power_out(dev, average);
max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
-
if ((dev->dev->bus->sprom.r1.boardflags_lo & BCM43xx_BFL_PACTRL) &&
(phy->type == BCM43xx_PHYTYPE_G))
max_pwr -= 0x3;
+ if (unlikely(max_pwr <= 0)) {
+ printk(KERN_ERR PFX "Invalid max-TX-power value in SPROM.\n");
+ max_pwr = 60; /* fake it */
+ dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+ }
/*TODO:
max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr)
desired_pwr = phy->power_level;
/* Convert the desired_pwr to Q5.2 and limit it. */
desired_pwr = limit_value((desired_pwr << 2), 0, max_pwr);
+ if (bcm43xx_debug(dev, BCM43xx_DBG_XMITPOWER)) {
+ dprintk(KERN_DEBUG PFX
+ "Current TX power output: " Q52_FMT " dBm, "
+ "Desired TX power output: " Q52_FMT " dBm\n",
+ Q52_ARG(estimated_pwr), Q52_ARG(desired_pwr));
+ }
pwr_adjust = desired_pwr - estimated_pwr;
- radio_att_delta = -((pwr_adjust + 7) >> 3);
- baseband_att_delta = (-(pwr_adjust >> 1)) - (4 * radio_att_delta);
- if ((radio_att_delta == 0) && (baseband_att_delta == 0)) {
+ rfatt_delta = -((pwr_adjust + 7) >> 3);
+ bbatt_delta = (-(pwr_adjust >> 1)) - (4 * rfatt_delta);
+ if ((rfatt_delta == 0) && (bbatt_delta == 0)) {
bcm43xx_lo_g_ctl_mark_cur_used(dev);
return;
}
/* Calculate the new attenuation values. */
- baseband_attenuation = phy->bbatt;
- baseband_attenuation += baseband_att_delta;
- radio_attenuation = phy->rfatt;
- radio_attenuation += radio_att_delta;
- put_attenuation_into_ranges(dev, &radio_attenuation,
- &baseband_attenuation);
-
- txpower = phy->txctl1;
+ bbatt = phy->bbatt.att;
+ bbatt += bbatt_delta;
+ rfatt = phy->rfatt.att;
+ rfatt += rfatt_delta;
+
+ bcm43xx_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
+ tx_control = phy->tx_control;
if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) {
- if (radio_attenuation <= 1) {
- if (txpower == 0) {
- txpower = 3;
- radio_attenuation += 2;
- baseband_attenuation += 2;
+ if (rfatt <= 1) {
+ if (tx_control == 0) {
+ tx_control = BCM43xx_TXCTL_PA2DB | BCM43xx_TXCTL_TXMIX;
+ rfatt += 2;
+ bbatt += 2;
} else if (dev->dev->bus->sprom.r1.boardflags_lo & BCM43xx_BFL_PACTRL) {
- baseband_attenuation += 4 * (radio_attenuation - 2);
- radio_attenuation = 2;
+ bbatt += 4 * (rfatt - 2);
+ rfatt = 2;
}
- } else if (radio_attenuation > 4 && txpower != 0) {
- txpower = 0;
- if (baseband_attenuation < 3) {
- radio_attenuation -= 3;
- baseband_attenuation += 2;
+ } else if (rfatt > 4 && tx_control) {
+ tx_control = 0;
+ if (bbatt < 3) {
+ rfatt -= 3;
+ bbatt += 2;
} else {
- radio_attenuation -= 2;
- baseband_attenuation -= 2;
+ rfatt -= 2;
+ bbatt -= 2;
}
}
}
- phy->txctl1 = txpower;
- baseband_attenuation = limit_value(baseband_attenuation, 0, 11);
- radio_attenuation = limit_value(radio_attenuation, 0, 9);
+ phy->tx_control = tx_control;
+ bcm43xx_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
bcm43xx_phy_lock(dev, phylock_flags);
bcm43xx_radio_lock(dev);
- bcm43xx_radio_set_txpower_bg(dev, baseband_attenuation,
- radio_attenuation, txpower);
+ bcm43xx_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
bcm43xx_lo_g_ctl_mark_cur_used(dev);
bcm43xx_radio_unlock(dev);
bcm43xx_phy_unlock(dev, phylock_flags);
{
struct bcm43xx_phy *phy = &dev->phy;
+ might_sleep();
+
if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) {
/* We do not need the workaround. */
return;
bcm43xx_write16(dev, BCM43xx_MMIO_CHANNEL,
channel2freq_bg(1));
}
- udelay(100);
+ msleep(1);
bcm43xx_write16(dev, BCM43xx_MMIO_CHANNEL,
channel2freq_bg(channel));
}
bcm43xx_radio_write16(dev, 0x0081, bcm43xx_radio_read16(dev, 0x0081) & ~0x0010);
bcm43xx_radio_write16(dev, 0x0081, bcm43xx_radio_read16(dev, 0x0081) & ~0x0020);
bcm43xx_radio_write16(dev, 0x0081, bcm43xx_radio_read16(dev, 0x0081) & ~0x0020);
- udelay(400);
+ msleep(1); /* delay 400usec */
bcm43xx_radio_write16(dev, 0x0081, (bcm43xx_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010);
- udelay(400);
+ msleep(1); /* delay 400usec */
bcm43xx_radio_write16(dev, 0x0005, (bcm43xx_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008);
bcm43xx_radio_write16(dev, 0x0085, bcm43xx_radio_read16(dev, 0x0085) & ~0x0010);
err = bcm43xx_radio_selectchannel(dev, BCM43xx_DEFAULT_CHANNEL_A, 0);
assert(err == 0);
- udelay(1000);
+
+ msleep(1);
}
static inline
}
phy->channel = channel;
- //XXX: Using the longer of 2 timeouts (8000 vs 2000 usecs). Specs states
- // that 2000 usecs might suffice.
- udelay(8000);
+ /* Wait for the radio to tune to the channel and stabilize. */
+ msleep(8);
return 0;
}
return ret;
}
-void bcm43xx_radio_set_txpower_a(struct bcm43xx_wldev *dev, u16 txpower)
+static void bcm43xx_radio_set_txpower_a(struct bcm43xx_wldev *dev, u16 txpower)
{
struct bcm43xx_phy *phy = &dev->phy;
u16 pamp, base, dac, t;
//TODO: FuncPlaceholder (Adjust BB loft cancel)
}
-void bcm43xx_radio_set_txpower_bg(struct bcm43xx_wldev *dev,
- s16 baseband_attenuation,
- s16 radio_attenuation,
- s16 _tx_magn)
-{
- struct bcm43xx_phy *phy = &dev->phy;
- u8 tx_bias = phy->lo_control->tx_bias;
- u8 tx_magn;
-
- if (baseband_attenuation < 0)
- baseband_attenuation = phy->bbatt;
- if (radio_attenuation < 0)
- radio_attenuation = phy->rfatt;
- if (_tx_magn < 0)
- _tx_magn = phy->lo_control->tx_magn;
- tx_magn = _tx_magn;
- phy->bbatt = baseband_attenuation;
- phy->rfatt = radio_attenuation;
-
- /* Set Baseband Attenuation on device. */
- bcm43xx_phy_set_baseband_attenuation(dev, baseband_attenuation);
-
- /* Set Radio Attenuation on device. */
- bcm43xx_shm_write16(dev, BCM43xx_SHM_SHARED,
- 0x0064, radio_attenuation);
- if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) {
- bcm43xx_phy_write(dev, 0x0043, radio_attenuation);
- } else {
- bcm43xx_radio_write16(dev, 0x0043,
- (bcm43xx_radio_read16(dev, 0x0043)
- & 0xFFF0) | radio_attenuation);
- }
-
- if (phy->radio_ver == 0x2050) {//FIXME: It seems like tx_magn and tx_bias are swapped in this func.
- if (phy->radio_rev < 6) {
- bcm43xx_radio_write16(dev, 0x0043,
- (bcm43xx_radio_read16(dev, 0x0043)
- & 0xFF8F) | tx_magn);
- } else if (phy->radio_rev != 8) {
- bcm43xx_radio_write16(dev, 0x0052,
- (bcm43xx_radio_read16(dev, 0x0052)
- & 0xFF8F) | tx_magn);
- } else {
- bcm43xx_radio_write16(dev, 0x52,
- (bcm43xx_radio_read16(dev, 0x52) & 0xFF00) |
- tx_magn | tx_bias);
- }
- }
- if (phy->radio_rev != 8) {
- bcm43xx_radio_write16(dev, 0x0052,
- (bcm43xx_radio_read16(dev, 0x0052)
- & 0xFFF0) | tx_bias);
- }
- if (phy->type == BCM43xx_PHYTYPE_G)
- bcm43xx_lo_g_adjust(dev);
-}
-
-u16 bcm43xx_default_baseband_attenuation(struct bcm43xx_wldev *dev)
-{
- struct bcm43xx_phy *phy = &dev->phy;
-
- if (phy->radio_ver == 0x2050 && phy->radio_rev < 6)
- return 0;
- return 2;
-}
-
-u16 bcm43xx_default_radio_attenuation(struct bcm43xx_wldev *dev)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct bcm43xx_phy *phy = &dev->phy;
- u16 att = 0xFFFF;
-
- if (phy->type == BCM43xx_PHYTYPE_A)
- return 0x60;
-
- switch (phy->radio_ver) {
- case 0x2053:
- switch (phy->radio_rev) {
- case 1:
- att = 6;
- break;
- }
- break;
- case 0x2050:
- switch (phy->radio_rev) {
- case 0:
- att = 5;
- break;
- case 1:
- if (phy->type == BCM43xx_PHYTYPE_G) {
- if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BCM4309G &&
- bus->board_rev >= 30)
- att = 3;
- else if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BU4306)
- att = 3;
- else
- att = 1;
- } else {
- if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BCM4309G &&
- bus->board_rev >= 30)
- att = 7;
- else
- att = 6;
- }
- break;
- case 2:
- if (phy->type == BCM43xx_PHYTYPE_G) {
- if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BCM4309G &&
- bus->board_rev >= 30)
- att = 3;
- else if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BU4306)
- att = 5;
- else if (bus->chip_id == 0x4320)
- att = 4;
- else
- att = 3;
- } else
- att = 6;
- break;
- case 3:
- att = 5;
- break;
- case 4:
- case 5:
- att = 1;
- break;
- case 6:
- case 7:
- att = 5;
- break;
- case 8:
- att = 0x1A;
- break;
- case 9:
- default:
- att = 5;
- }
- }
- if (bus->board_vendor == SSB_BOARDVENDOR_BCM &&
- bus->board_type == SSB_BOARD_BCM4309G) {
- if (bus->board_rev < 0x43)
- att = 2;
- else if (bus->board_rev < 0x51)
- att = 3;
- }
- if (att == 0xFFFF)
- att = 5;
-
- return att;
-}
-
-u16 bcm43xx_default_txctl1(struct bcm43xx_wldev *dev)
-{
- struct bcm43xx_phy *phy = &dev->phy;
-
- if (phy->radio_ver != 0x2050)
- return 0;
- if (phy->radio_rev == 1)
- return 3;
- if (phy->radio_rev < 6)
- return 2;
- if (phy->radio_rev == 8)
- return 1;
- return 0;
-}
-
void bcm43xx_radio_turn_on(struct bcm43xx_wldev *dev)
{
struct bcm43xx_phy *phy = &dev->phy;
int err;
+ might_sleep();
+
if (phy->radio_on)
return;
projects / openwrt / svn-archive / archive.git / blobdiff