-bridge_interface() {
- (
- . /etc/functions.sh
- include network
- scan_interfaces
- cfg="$(find_config "$1")"
- [ -z "$cfg" ] && return 0
- config_get iftype "$cfg" type
- [ "$iftype" = bridge ] && config_get "$iftype" bridge
- )
-}
+append DRIVERS "broadcom"
scan_broadcom() {
local device="$1"
+ local wds
+ local adhoc sta apmode
+ local adhoc_if sta_if ap_if
config_get vifs "$device" vifs
for vif in $vifs; do
sta_if="$vif"
;;
ap)
- ap=1
+ apmode=1
ap_if="${ap_if:+$ap_if }$vif"
;;
+ wds)
+ config_get addr "$vif" bssid
+ [ -z "$addr" ] || append wds "$addr"
+ ;;
*) echo "$device($vif): Invalid mode";;
esac
done
+ config_set "$device" wds "$wds"
local _c=
for vif in ${adhoc_if:-$sta_if $ap_if}; do
config_set "$vif" ifname "wl0${_c:+.$_c}"
_c=$((${_c:-0} + 1))
done
+ config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if}"
ifdown="down"
for vif in 0 1 2 3; do
mssid=1
apsta=0
radio=1
- case "$adhoc:$sta:$ap" in
+ case "$adhoc:$sta:$apmode" in
1*)
ap=0
mssid=0
esac
}
+disable_broadcom() {
+ wlc down
+ (
+ include /lib/network
+
+ # make sure the interfaces are down and removed from all bridges
+ for dev in wl0 wl0.1 wl0.2 wl0.3; do
+ ifconfig "$dev" down 2>/dev/null >/dev/null && {
+ unbridge "$dev"
+ }
+ done
+ )
+ true
+}
-setup_broadcom() {
+enable_broadcom() {
local _c
config_get channel "$device" channel
config_get country "$device" country
config_get maxassoc "$device" maxassoc
+ config_get wds "$device" wds
+ config_get vifs "$device" vifs
+ config_get distance "$device" distance
+ config_get slottime "$device" slottime
+ config_get rxant "$device" rxant
+ config_get txant "$device" txant
+ local vif_pre_up vif_post_up vif_do_up
_c=0
nas="$(which nas)"
nas_cmd=
if_up=
- for vif in ${adhoc_if:-$sta_if $ap_if}; do
+
+ [ -z "$slottime" ] && {
+ [ -n "$distance" ] && {
+ # slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
+ slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
+ }
+ } || {
+ slottime="${slottime:--1}"
+ }
+
+ for vif in $vifs; do
+ config_get mode "$vif" mode
append vif_pre_up "vif $_c" "$N"
append vif_post_up "vif $_c" "$N"
- [ "$vif" = "$sta_if" ] || {
- config_get_bool hidden "$vif" hidden 1
+ [ "$mode" = "sta" ] || {
+ config_get_bool hidden "$vif" hidden 0
append vif_pre_up "closed $hidden" "$N"
- config_get_bool isolate "$vif" isolate
- append vif_pre_up "ap_isolate $hidden" "$N"
+ config_get_bool isolate "$vif" isolate 0
+ append vif_pre_up "ap_isolate $isolate" "$N"
}
wsec_r=0
case "$enc" in
WEP|wep)
wsec_r=1
+ wsec=1
+ defkey=1
+ config_get key "$vif" key
+ case "$key" in
+ [1234])
+ defkey="$key"
+ for knr in 1 2 3 4; do
+ config_get k "$vif" key$knr
+ [ -n "$k" ] || continue
+ [ "$defkey" = "$knr" ] && def="=" || def=""
+ append vif_pre_up "wepkey $def$knr,$k" "$N"
+ done
+ ;;
+ "");;
+ *) append vif_pre_up "wepkey =1,$key" "$N";;
+ esac
;;
*psk*|*PSK*)
wsec_r=1
config_get key "$vif" key
case "$enc" in
- wpa2*|WPA2*|PSK2*|psk2*) auth=128; wsec=4;;
- *) auth=4; crypto=2;;
+ wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
+ wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
+ *) auth=4; wsec=2;;
esac
eval "${vif}_key=\"\$key\""
nasopts="-k \"\$${vif}_key\""
config_get server "$vif" server
config_get port "$vif" port
case "$enc" in
+ wpa*+wpa2*|WPA*+WPA2*) auth=66; wsec=6;;
wpa2*|WPA2*) auth=64; wsec=4;;
- *) auth=2; crypto=2;;
+ *) auth=2; wsec=2;;
esac
eval "${vif}_key=\"\$key\""
nasopts="-r \"\$${vif}_key\" -h $server -p $port"
append vif_post_up "eap_restrict $eap_r" "$N"
config_get ssid "$vif" ssid
- append vif_post_up "vlan_mode 0"
+ append vif_post_up "vlan_mode 0" "$N"
append vif_post_up "ssid $ssid" "$N"
+ case "$mode" in
+ sta|adhoc) append vif_do_up "ssid $ssid" "$N";;
+ esac
+
append vif_post_up "enabled 1" "$N"
config_get ifname "$vif" ifname
append if_up "ifconfig $ifname up" ";$N"
+ local net_cfg bridge
+ net_cfg="$(find_net_config "$vif")"
+ [ -z "$net_cfg" ] || {
+ bridge="$(bridge_interface "$net_cfg")"
+ append if_up "start_net '$ifname' '$net_cfg'" ";$N"
+ }
[ -z "$nasopts" ] || {
- bridge="$(bridge_interface "$ifname")"
eval "${vif}_ssid=\"\$ssid\""
mode="-A"
[ "$vif" = "$sta_if" ] && mode="-S"
- [ -z "$nas" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $mode -m $auth -w $crypto -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
+ [ -z "$nas" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
}
_c=$(($_c + 1))
done
wlc stdin <<EOF
$ifdown
-mssid $mssid
ap $ap
+mssid $mssid
apsta $apsta
infra $infra
${wet:+wet 1}
+802.11d 0
+802.11h 0
+rxant ${rxant:-3}
+txant ${txant:-3}
radio ${radio:-1}
macfilter 0
maclist none
-wds none
-channel ${channel:-0}
+wds ${wds:-none}
+${channel:+channel $channel}
country ${country:-IL0}
maxassoc ${maxassoc:-128}
+slottime ${slottime:--1}
$vif_pre_up
up
$vif_post_up
EOF
- eval "$nas_cmd"
eval "$if_up"
+ wlc stdin <<EOF
+$vif_do_up
+EOF
+ eval "$nas_cmd"
}
+detect_broadcom() {
+ [ -f /proc/net/wl0 ] || return
+ config_get type wl0 type
+ [ "$type" = broadcom ] && return
+ cat <<EOF
+config wifi-device wl0
+ option type broadcom
+ option channel 5
+
+ # REMOVE THIS LINE TO ENABLE WIFI:
+ option disabled 1
+
+config wifi-iface
+ option device wl0
+ option network lan
+ option mode ap
+ option ssid OpenWrt
+ option encryption none
+EOF
+}
projects / openwrt / svn-archive / archive.git / blobdiff