Add macfiltering to broadcom-wl

[openwrt/svn-archive/archive.git] / package / broadcom-wl / files / lib / wifi / broadcom.sh

diff --git a/package/broadcom-wl/files/lib/wifi/broadcom.sh b/package/broadcom-wl/files/lib/wifi/broadcom.sh
index 6a38d0383a95aa2c308f844486c41749ab3c96b5..cb35ef1f78c8d66d618b62845a67a111b9121c1b 100644 (file)
--- a/package/broadcom-wl/files/lib/wifi/broadcom.sh
+++ b/package/broadcom-wl/files/lib/wifi/broadcom.sh
@@ -5,6 +5,7 @@ scan_broadcom() {
        local wds
        local adhoc sta apmode
        local adhoc_if sta_if ap_if
+       local macfilter
 
        config_get vifs "$device" vifs
        for vif in $vifs; do
@@ -68,9 +69,22 @@ scan_broadcom() {
                        radio=0
                ;;
        esac
+       macfilter=0
+       case "$macfilter" in
+               allow|2)
+                       macfilter=allow;
+               ;;
+               deny|1)
+                       macfilter=deny;
+               ;;
+               disable|0)
+                       macfilter=disabled;
+               ;;
+       esac
 }
 
 disable_broadcom() {
+       set_wifi_down "$1"
        wlc down
        (
                include /lib/network
@@ -94,6 +108,10 @@ enable_broadcom() {
        config_get vifs "$device" vifs
        config_get distance "$device" distance
        config_get slottime "$device" slottime
+       config_get rxant "$device" rxant
+       config_get txant "$device" txant
+       config_get macfilter "$device" macfilter
+       config_get maclist "$device" maclist
        local vif_pre_up vif_post_up vif_do_up
 
        _c=0
@@ -152,7 +170,8 @@ enable_broadcom() {
                                wsec_r=1
                                config_get key "$vif" key
                                case "$enc" in
-                                       wpa2*|WPA2*|PSK2*|psk2*) auth=128; wsec=4;;
+                                       wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
+                                       wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
                                        *) auth=4; wsec=2;;
                                esac
                                eval "${vif}_key=\"\$key\""
@@ -165,6 +184,7 @@ enable_broadcom() {
                                config_get server "$vif" server
                                config_get port "$vif" port
                                case "$enc" in
+                                       wpa*+wpa2*|WPA*+WPA2*) auth=66; wsec=6;;
                                        wpa2*|WPA2*) auth=64; wsec=4;;
                                        *) auth=2; wsec=2;;
                                esac
@@ -187,18 +207,28 @@ enable_broadcom() {
                append vif_post_up "enabled 1" "$N"
                
                config_get ifname "$vif" ifname
-               append if_up "ifconfig $ifname up" ";$N"
+               #append if_up "ifconfig $ifname up" ";$N"
                local net_cfg bridge
                net_cfg="$(find_net_config "$vif")"
                [ -z "$net_cfg" ] || {
                        bridge="$(bridge_interface "$net_cfg")"
                        append if_up "start_net '$ifname' '$net_cfg'" ";$N"
+                       append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
                }
                [ -z "$nasopts" ] || {
                        eval "${vif}_ssid=\"\$ssid\""
-                       mode="-A"
-                       [ "$vif" = "$sta_if" ] && mode="-S"
-                       [ -z "$nas" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
+                       nas_mode="-A"
+                       use_nas=1
+                       [ "$mode" = "sta" ] && {
+                               nas_mode="-S"
+                               [ -z "$bridge" ] || {
+                                       append vif_pre_up "supplicant 1" "$N"
+                                       append vif_pre_up "passphrase $key" "$N"
+                                       
+                                       use_nas=0
+                               }
+                       }
+                       [ -z "$nas" -o "$use_nas" = "0" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
                }
                _c=$(($_c + 1))
        done
@@ -213,11 +243,14 @@ infra $infra
 ${wet:+wet 1}
 802.11d 0
 802.11h 0
+rxant ${rxant:-3}
+txant ${txant:-3}
 
 radio ${radio:-1}
-macfilter 0
-maclist none
-wds ${wds:-none}
+macfilter ${macfilter:-disabled}
+maclist ${maclist:-none}
+wds none
+${wds:+wds $wds}
 ${channel:+channel $channel}
 country ${country:-IL0}
 maxassoc ${maxassoc:-128}
@@ -243,7 +276,8 @@ detect_broadcom() {
 config wifi-device  wl0
        option type     broadcom
        option channel  5
-# disable radio to prevent an open ap after reflashing:
+
+       # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 1
 
 config wifi-iface
@@ -251,8 +285,6 @@ config wifi-iface
        option network  lan
        option mode     ap
        option ssid     OpenWrt
-       option hidden   0
        option encryption none
-
 EOF
 }