scan_broadcom() {
local device="$1"
local wds
- local adhoc sta apmode mon
+ local adhoc sta apmode mon disabled
local adhoc_if sta_if ap_if mon_if
+ local _c=0
config_get vifs "$device" vifs
for vif in $vifs; do
+ config_get_bool disabled "$vif" disabled 0
+ [ $disabled -eq 0 ] || continue
+
config_get mode "$vif" mode
+ _c=$(($_c + 1))
case "$mode" in
adhoc)
adhoc=1
local _c=
for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
- config_set "$vif" ifname "wl0${_c:+.$_c}"
+ config_set "$vif" ifname "${device}${_c:+.$_c}"
_c=$((${_c:-0} + 1))
done
config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
ap=1
infra=1
- mssid=1
+ if [ "$_c" -gt 1 ]; then
+ mssid=1
+ else
+ mssid=
+ fi
apsta=0
radio=1
monitor=0
- passive=0
case "$adhoc:$sta:$apmode:$mon" in
1*)
ap=0
ap=0
mssid=
monitor=1
- passive=1
;;
::)
radio=0
}
disable_broadcom() {
- set_wifi_down "$1"
- wlc down
+ local device="$1"
+ set_wifi_down "$device"
+ wlc ifname "$device" down
+ wlc ifname "$device" bssid `wlc ifname "$device" default_bssid`
(
include /lib/network
# make sure the interfaces are down and removed from all bridges
- for dev in wl0 wl0.1 wl0.2 wl0.3; do
+ for dev in $device ${device}.1 ${device}.2 ${device}.3; do
ifconfig "$dev" down 2>/dev/null >/dev/null && {
unbridge "$dev"
}
}
enable_broadcom() {
+ local device="$1"
local _c
config_get channel "$device" channel
config_get country "$device" country
config_get vifs "$device" vifs
config_get distance "$device" distance
config_get slottime "$device" slottime
- config_get rxant "$device" rxant
- config_get txant "$device" txant
+ config_get rxantenna "$device" rxantenna
+ config_get txantenna "$device" txantenna
config_get_bool frameburst "$device" frameburst
config_get macfilter "$device" macfilter
config_get maclist "$device" maclist
- local vif_pre_up vif_post_up vif_do_up
+ config_get macaddr "$device" macaddr
+ config_get txpower "$device" txpower
+ config_get frag "$device" frag
+ config_get rts "$device" rts
+ config_get hwmode "$device" hwmode
+ local vif_pre_up vif_post_up vif_do_up vif_txpower
+ local doth=0
+ local wmm=0
_c=0
nas="$(which nas)"
} || {
slottime="${slottime:--1}"
}
-
+
case "$macfilter" in
allow|2)
macfilter=2;
;;
esac
+ case "$hwmode" in
+ *b) hwmode=0;;
+ *bg) hwmode=1;;
+ *g) hwmode=2;;
+ *gst) hwmode=4;;
+ *lrs) hwmode=5;;
+ *) hwmode=1;;
+ esac
+
for vif in $vifs; do
+ config_get vif_txpower "$vif" txpower
+
config_get mode "$vif" mode
append vif_pre_up "vif $_c" "$N"
append vif_post_up "vif $_c" "$N"
append vif_do_up "vif $_c" "$N"
-
+
+ config_get_bool wmm "$vif" wmm "$wmm"
+ config_get_bool doth "$vif" doth "$doth"
+
[ "$mode" = "sta" ] || {
config_get_bool hidden "$vif" hidden 0
append vif_pre_up "closed $hidden" "$N"
nasopts=
config_get enc "$vif" encryption
case "$enc" in
- WEP|wep)
+ *wep*)
wsec_r=1
wsec=1
defkey=1
config_get key "$vif" key
+ case "$enc" in
+ *shared*) append vif_do_up "wepauth 1" "$N";;
+ *) append vif_do_up "wepauth 0" "$N";;
+ esac
case "$key" in
[1234])
defkey="$key"
*) append vif_do_up "wepkey =1,$key" "$N";;
esac
;;
- *psk*|*PSK*)
+ *psk*)
wsec_r=1
config_get key "$vif" key
+
+ # psk version + default cipher
case "$enc" in
- wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
- wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
+ *mixed*|*psk+psk2*) auth=132; wsec=6;;
+ *psk2*) auth=128; wsec=4;;
*) auth=4; wsec=2;;
esac
+
+ # cipher override
+ case "$enc" in
+ *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
+ *aes*|*ccmp*) wsec=4;;
+ *tkip*) wsec=2;;
+ esac
+
eval "${vif}_key=\"\$key\""
nasopts="-k \"\$${vif}_key\""
;;
- *wpa*|*WPA*)
+ *wpa*)
wsec_r=1
eap_r=1
config_get key "$vif" key
config_get server "$vif" server
config_get port "$vif" port
+
+ # wpa version + default cipher
case "$enc" in
- wpa*+wpa2*|WPA*+WPA2*) auth=66; wsec=6;;
- wpa2*|WPA2*) auth=64; wsec=4;;
+ *mixed*|*wpa+wpa2*) auth=66; wsec=6;;
+ *wpa2*) auth=64; wsec=4;;
*) auth=2; wsec=2;;
esac
+
+ # cipher override
+ case "$enc" in
+ *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
+ *aes*|*ccmp*) wsec=4;;
+ *tkip*) wsec=2;;
+ esac
+
eval "${vif}_key=\"\$key\""
nasopts="-r \"\$${vif}_key\" -h $server -p ${port:-1812}"
;;
append vif_do_up "wpa_auth $auth" "$N"
append vif_do_up "wsec_restrict $wsec_r" "$N"
append vif_do_up "eap_restrict $eap_r" "$N"
-
+
config_get ssid "$vif" ssid
append vif_post_up "vlan_mode 0" "$N"
append vif_post_up "ssid $ssid" "$N"
[ "$mode" = "monitor" ] && {
append vif_post_up "monitor $monitor" "$N"
- append vif_post_up "passive $passive" "$N"
}
-
+
+ [ "$mode" = "adhoc" ] && {
+ config_get bssid "$vif" bssid
+ [ -n "$bssid" ] && {
+ append vif_pre_up "bssid $bssid" "$N"
+ append vif_pre_up "ibss_merge 0" "$N"
+ } || {
+ append vif_pre_up "ibss_merge 1" "$N"
+ }
+ }
+
append vif_post_up "enabled 1" "$N"
-
+
config_get ifname "$vif" ifname
#append if_up "ifconfig $ifname up" ";$N"
- local net_cfg bridge
+
+ local net_cfg
net_cfg="$(find_net_config "$vif")"
[ -z "$net_cfg" ] || {
- bridge="$(bridge_interface "$net_cfg")"
- append if_up "start_net '$ifname' '$net_cfg'" ";$N"
append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
+ append if_up "start_net '$ifname' '$net_cfg'" ";$N"
}
[ -z "$nasopts" ] || {
eval "${vif}_ssid=\"\$ssid\""
nas_mode="-A"
- use_nas=1
- [ "$mode" = "sta" ] && {
- nas_mode="-S"
- [ -z "$bridge" ] || {
- append vif_post_up "supplicant 1" "$N"
- append vif_post_up "passphrase $key" "$N"
-
- use_nas=0
- }
+ [ "$mode" = "sta" ] && nas_mode="-S"
+ [ -z "$nas" ] || {
+ nas_cmd="${nas_cmd:+$nas_cmd$N}start-stop-daemon -S -b -p /var/run/nas.$ifname.pid -x $nas -- -P /var/run/nas.$ifname.pid -H 34954 -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts"
}
- [ -z "$nas" -o "$use_nas" = "0" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
}
_c=$(($_c + 1))
done
killall -KILL nas >&- 2>&-
- wlc stdin <<EOF
+ wlc ifname "$device" stdin <<EOF
$ifdown
+gmode ${hwmode:-1}
+apsta $apsta
ap $ap
${mssid:+mssid $mssid}
-apsta $apsta
infra $infra
${wet:+wet 1}
802.11d 0
-802.11h 0
-rxant ${rxant:-3}
-txant ${txant:-3}
+802.11h ${doth:-0}
+wme ${wmm:-0}
+rxant ${rxantenna:-3}
+txant ${txantenna:-3}
+fragthresh ${frag:-2346}
+rtsthresh ${rts:-2347}
monitor ${monitor:-0}
-passive ${passive:-0}
radio ${radio:-1}
macfilter ${macfilter:-0}
maclist ${maclist:-none}
wds none
${wds:+wds $wds}
-country ${country:-IL0}
+country ${country:-US}
${channel:+channel $channel}
maxassoc ${maxassoc:-128}
slottime ${slottime:--1}
$vif_post_up
EOF
eval "$if_up"
- wlc stdin <<EOF
+ wlc ifname "$device" stdin <<EOF
$vif_do_up
EOF
+
+ # use vif_txpower (from last wifi-iface) instead of txpower (from
+ # wifi-device) if the latter does not exist
+ txpower=${txpower:-$vif_txpower}
+ [ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
+
eval "$nas_cmd"
}
detect_broadcom() {
- [ -f /proc/net/wl0 ] || return
- config_get type wl0 type
- [ "$type" = broadcom ] && return
- cat <<EOF
-config wifi-device wl0
+ local i=-1
+
+ while grep -qs "^ *wl$((++i)):" /proc/net/dev; do
+ config_get type wl${i} type
+ [ "$type" = broadcom ] && continue
+ cat <<EOF
+config wifi-device wl${i}
option type broadcom
- option channel 5
+ option channel 11
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
- option device wl0
+ option device wl${i}
option network lan
option mode ap
- option ssid OpenWrt
+ option ssid OpenWrt${i#0}
option encryption none
+
EOF
+ done
}
projects / openwrt / svn-archive / archive.git / blobdiff