parse the a/g mode setting in /etc/config/wireless when setting up hostapd (instead...

[openwrt/svn-archive/archive.git] / package / hostapd / files / hostapd.sh

diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh
index 529462e6c981a649264a7dba9148e3c752d0f018..7a67cec949c03f72ac0cae27b7c57a2a6088f85a 100644 (file)
--- a/package/hostapd/files/hostapd.sh
+++ b/package/hostapd/files/hostapd.sh
@@ -11,7 +11,7 @@ hostapd_setup_vif() {
 
        # TODO: move this parsing function somewhere generic, so that
        # later it can be reused by drivers that don't use hostapd
-       
+
        # crypto defaults: WPA2 vs WPA1
        case "$enc" in
                wpa2*|WPA2*|*PSK2*|*psk2*)
@@ -34,26 +34,58 @@ hostapd_setup_vif() {
                *tkip|*TKIP) crypto="TKIP";;
                *aes|*AES|*ccmp|*CCMP) crypto="CCMP";;
        esac
-       
+
        # use crypto/auth settings for building the hostapd config
        case "$enc" in
                *psk*|*PSK*)
                        config_get psk "$vif" key
-                       append hostapd_cfg "wpa_passphrase=$psk" "$N"
+                       if [ ${#psk} -eq 64 ]; then
+                               append hostapd_cfg "wpa_psk=$psk" "$N"
+                       else
+                               append hostapd_cfg "wpa_passphrase=$psk" "$N"
+                       fi
                ;;
                *wpa*|*WPA*)
-               # FIXME: add wpa+radius here
+                       # required fields? formats?
+                       # hostapd is particular, maybe a default configuration for failures
+                       config_get server "$vif" server
+                       append hostapd_cfg "auth_server_addr=$server" "$N"
+                       config_get port "$vif" port
+                       port=${port:-1812}
+                       append hostapd_cfg "auth_server_port=$port" "$N"
+                       config_get secret "$vif" key
+                       append hostapd_cfg "auth_server_shared_secret=$secret" "$N"
+                       config_get nasid "$vif" nasid
+                       append hostapd_cfg "nas_identifier=$nasid" "$N"
+                       append hostapd_cfg "eapol_key_index_workaround=1" "$N"
+                       append hostapd_cfg "radius_acct_interim_interval=300" "$N"
+                       append hostapd_cfg "ieee8021x=1" "$N"
+                       append hostapd_cfg "auth_algs=1" "$N"
+                       append hostapd_cfg "wpa_key_mgmt=WPA-EAP" "$N"
+                       append hostapd_cfg "wpa_group_rekey=300" "$N"
+                       append hostapd_cfg "wpa_gmk_rekey=640" "$N"
                ;;
                *)
-                       return 0;
+                       wpa=0
                ;;
        esac
        config_get ifname "$vif" ifname
        config_get bridge "$vif" bridge
        config_get ssid "$vif" ssid
+       config_get device "$vif" device
+       config_get channel "$device" channel
+       config_get agmode "$device" agmode
+       case "$agmode" in
+               11a) agmode=a;;
+               11b) agmode=b;;
+               11g) agmode=g;;
+               *) agmode=;;
+       esac
        cat > /var/run/hostapd-$ifname.conf <<EOF
 driver=$driver
 interface=$ifname
+hw_mode=${agmode:-g}
+channel=$channel
 ${bridge:+bridge=$bridge}
 ssid=$ssid
 debug=0