$(eval $(call KernelPackage,i2c-gpio))
-I2C_SCX200_MODULES:=\
- CONFIG_SCx200_I2C:drivers/i2c/busses/scx200_i2c
-
-define KernelPackage/i2c-scx200
- $(call i2c_defaults,$(I2C_SCX200_MODULES),59)
- TITLE:=Geode SCx200 I2C using GPIO pins
- DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-algo-bit
- KCONFIG+= \
- CONFIG_SCx200_I2C_SCL=12 \
- CONFIG_SCx200_I2C_SDA=13
-endef
-
-define KernelPackage/i2c-scx200/description
- Kernel module for I2C using GPIO pins on the Geode SCx200 processors.
-endef
-
-$(eval $(call KernelPackage,i2c-scx200))
-
-
-I2C_SCX200_ACB_MODULES:=\
- CONFIG_SCx200_ACB:drivers/i2c/busses/scx200_acb
-
-define KernelPackage/i2c-scx200-acb
- $(call i2c_defaults,$(I2C_SCX200_ACB_MODULES),59)
- TITLE:=Geode SCx200 ACCESS.bus support
- DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-algo-bit
-endef
-
-define KernelPackage/i2c-scx200-acb/description
- Kernel module for I2C using the ACCESS.bus controllers on the Geode SCx200
- and SC1100 processors and the CS5535 and CS5536 Geode companion devices.
-endef
-
-$(eval $(call KernelPackage,i2c-scx200-acb))
-
OF_I2C_MODULES:=\
CONFIG_OF_I2C:drivers/of/of_i2c
define KernelPackage/of-i2c
$(call i2c_defaults,$(OF_I2C_MODULES),58)
TITLE:=OpenFirmware I2C accessors
- DEPENDS:=@TARGET_ppc40x||TARGET_ppc4xx kmod-i2c-core
+ DEPENDS:=@TARGET_ppc40x||TARGET_ppc4xx||TARGET_mpc52xx||TARGET_mpc83xx||TARGET_mpc85xx \
+ kmod-i2c-core
endef
define KernelPackage/of-i2c/description
$(eval $(call KernelPackage,of-i2c))
+I2C_MPC_MODULES:=\
+ CONFIG_I2C_MPC:drivers/i2c/busses/i2c-mpc
+
+define KernelPackage/i2c-mpc
+ $(call i2c_defaults,$(I2C_MPC_MODULES),59)
+ TITLE:=MPC I2C accessors
+ DEPENDS:=@TARGET_mpc52xx||TARGET_mpc83xx||TARGET_mpc85xx \
+ +kmod-i2c-core +kmod-of-i2c
+endef
+
+define KernelPackage/i2c-mpc/description
+ Kernel module for Freescale MPC52xx MPC83xx MPC85xx I2C accessors.
+endef
+
+$(eval $(call KernelPackage,i2c-mpc))
I2C_IBM_IIC_MODULES:=\
CONFIG_I2C_IBM_IIC:drivers/i2c/busses/i2c-ibm_iic
$(eval $(call KernelPackage,i2c-mv64xxx))
-I2C_AT91_MODULES:=\
- CONFIG_I2C_AT91:drivers/i2c/busses/i2c-at91
+I2C_TINY_USB_MODULES:= \
+ CONFIG_I2C_TINY_USB:drivers/i2c/busses/i2c-tiny-usb
+
+define KernelPackage/i2c-tiny-usb
+ $(call i2c_defaults,$(I2C_TINY_USB_MODULES),59)
+ TITLE:=I2C Tiny USB adaptor
+ DEPENDS:=@USB_SUPPORT kmod-i2c-core
+endef
+
+define KernelPackage/i2c-tiny-usb/description
+ Kernel module for the I2C Tiny USB adaptor developed
+ by Till Harbaum (http://www.harbaum.org/till/i2c_tiny_usb).
+endef
+
+$(eval $(call KernelPackage,i2c-tiny-usb))
+
+I2C_MUX_MODULES:= \
+ CONFIG_I2C_MUX:drivers/i2c/i2c-mux
+
+define KernelPackage/i2c-mux
+ $(call i2c_defaults,$(I2C_MUX_MODULES),51)
+ TITLE:=I2C bus multiplexing support
+ DEPENDS:=kmod-i2c-core
+endef
+
+define KernelPackage/i2c-mux/description
+ Kernel modules for I2C bus multiplexing support.
+endef
+
+$(eval $(call KernelPackage,i2c-mux))
+
+I2C_MUX_GPIO_MODULES:= \
+ CONFIG_I2C_MUX_GPIO:drivers/i2c/muxes/gpio-i2cmux
+
+define KernelPackage/i2c-mux-gpio
+ $(call i2c_defaults,$(I2C_MUX_GPIO_MODULES),51)
+ TITLE:=GPIO-based I2C mux/switches
+ DEPENDS:=kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-gpio/description
+ Kernel modules for GENERIC_GPIO I2C bus mux/switching devices.
+endef
+
+$(eval $(call KernelPackage,i2c-mux-gpio))
+
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.6.0)),1)
+I2C_MUX_PREFIX:=i2c-mux-
+endif
+
+I2C_MUX_PCA954x_MODULES:= \
+ CONFIG_I2C_MUX_PCA954x:drivers/i2c/muxes/$(I2C_MUX_PREFIX)pca954x
+
+define KernelPackage/i2c-mux-pca954x
+ $(call i2c_defaults,$(I2C_MUX_PCA954x_MODULES),51)
+ TITLE:=Philips PCA954x I2C mux/switches
+ DEPENDS:=kmod-i2c-mux
+endef
-define KernelPackage/at91-i2c
- $(call i2c_defaults,$(I2C_AT91_MODULES),55)
- TITLE:=I2C (TWI) master driver for Atmel AT91
- DEPENDS:=@TARGET_at91 +kmod-i2c-core
+define KernelPackage/i2c-mux-pca954x/description
+ Kernel modules for PCA954x I2C bus mux/switching devices.
endef
-define KernelPackage/at91-i2c/description
- Kernel module to use the I2C (TWI) master driver for Atmel AT91
+$(eval $(call KernelPackage,i2c-mux-pca954x))
+## Support for pca954x seems to be in kernel since 2.6.36
+
+I2C_MUX_PCA9541_MODULES:= \
+ CONFIG_I2C_MUX_PCA9541:drivers/i2c/muxes/$(I2C_MUX_PREFIX)pca9541
+
+define KernelPackage/i2c-mux-pca9541
+ $(call i2c_defaults,$(I2C_MUX_PCA9541_MODULES),51)
+ TITLE:=Philips PCA9541 I2C mux/switches
+ DEPENDS:=kmod-i2c-mux
endef
-$(eval $(call KernelPackage,at91-i2c))
+define KernelPackage/i2c-mux-pca9541/description
+ Kernel modules for PCA9541 I2C bus mux/switching devices.
+endef
-I2C_OCTEON_MODULES:=\
- CONFIG_I2C_OCTEON:drivers/i2c/busses/i2c-octeon
+$(eval $(call KernelPackage,i2c-mux-pca9541))
-define KernelPackage/octeon-i2c
- $(call i2c_defaults,$(I2C_OCTEON_MODULES),59)
- TITLE:=I2C master driver for Cavium Octeon
- DEPENDS:=@TARGET_octeon +kmod-i2c-core
+GPIO_PCA953X_MODULES:= \
+ CONFIG_GPIO_PCA953X:drivers/gpio/gpio-pca953x
+
+define KernelPackage/pca953x
+ $(call i2c_defaults,$(GPIO_PCA953X_MODULES),51)
+ TITLE:=Philips PCA953x I2C GPIO extenders
+ DEPENDS:=kmod-i2c-core
+endef
+
+define KernelPackage/pca953x/description
+ Kernel modules for PCA953x I2C GPIO extenders.
+endef
+
+$(eval $(call KernelPackage,pca953x))
+
+GPIO_PCF857X_MODULES:= \
+ CONFIG_GPIO_PCF857X:drivers/gpio/gpio-pcf857x
+
+define KernelPackage/pcf857x
+ $(call i2c_defaults,$(GPIO_PCF857X_MODULES),51)
+ TITLE:=Philips PCF857x I2C GPIO extenders
+ DEPENDS:=kmod-i2c-core
endef
-define KernelPackage/octeon-i2c/description
- Kernel module to use the I2C master driver on Cavium Octeon
+define KernelPackage/pcf857x/description
+ Kernel modules for PCF857x I2C GPIO extenders.
endef
-$(eval $(call KernelPackage,octeon-i2c))
+$(eval $(call KernelPackage,pcf857x))
projects / openwrt / svn-archive / archive.git / blobdiff