#
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
CONFIG_BLUEZ_HCIUSB \
CONFIG_BLUEZ_HIDP \
CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
+ CONFIG_BT_L2CAP=y \
+ CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
- CONFIG_BT_HIDP
+ CONFIG_BT_HCIUART_H4 \
+ CONFIG_BT_HIDP \
+ CONFIG_HID_SUPPORT=y
$(call AddDepends/crc16)
$(call AddDepends/hid)
$(call AddDepends/rfkill)
FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+ $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.39)),1)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
+ else
+ FILES+= \
+ $(LINUX_DIR)/net/bluetooth/l2cap.ko \
+ $(LINUX_DIR)/net/bluetooth/sco.ko
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+ endif
endef
define KernelPackage/bluetooth/description
$(eval $(call KernelPackage,bluetooth))
-define KernelPackage/crc-ccitt
+define KernelPackage/bluetooth-hci-h4p
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC-CCITT support
- KCONFIG:=CONFIG_CRC_CCITT
- FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+ TITLE:=HCI driver with H4 Nokia extensions
+ DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
+ KCONFIG:=CONFIG_BT_HCIH4P
+ FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
+ AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
endef
-define KernelPackage/crc-ccitt/description
- Kernel module for CRC-CCITT support
+define KernelPackage/bluetooth-hci-h4p/description
+ HCI driver with H4 Nokia extensions
endef
-$(eval $(call KernelPackage,crc-ccitt))
+$(eval $(call KernelPackage,bluetooth-hci-h4p))
-define KernelPackage/crc-itu-t
+define KernelPackage/cpu-msr
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC ITU-T V.41 support
- KCONFIG:=CONFIG_CRC_ITU_T
- FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+ TITLE:=x86 CPU MSR support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_X86_MSR
+ FILES:=$(LINUX_DIR)/arch/x86/kernel/msr.ko
+ AUTOLOAD:=$(call AutoLoad,20,msr)
endef
-define KernelPackage/crc-itu-t/description
- Kernel module for CRC ITU-T V.41 support
+define KernelPackage/cpu-msr/description
+ Kernel module for Model Specific Registers support in x86 CPUs
endef
-$(eval $(call KernelPackage,crc-itu-t))
+$(eval $(call KernelPackage,cpu-msr))
-define KernelPackage/crc7
+define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC7 support
- KCONFIG:=CONFIG_CRC7
- FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc7)
+ TITLE:=EEPROM 93CX6 support
+ KCONFIG:=CONFIG_EEPROM_93CX6
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
+ AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
-define KernelPackage/crc7/description
- Kernel module for CRC7 support
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
endef
-$(eval $(call KernelPackage,crc7))
+$(eval $(call KernelPackage,eeprom-93cx6))
-define KernelPackage/crc16
+define KernelPackage/eeprom-at24
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC16 support
- KCONFIG:=CONFIG_CRC16
- FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc16,1)
- $(call SetDepends/crc16)
+ TITLE:=EEPROM AT24 support
+ KCONFIG:=CONFIG_EEPROM_AT24
+ DEPENDS:=+kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
+ AUTOLOAD:=$(call AutoLoad,60,at24)
endef
-define KernelPackage/crc16/description
- Kernel module for CRC16 support
+define KernelPackage/eeprom-at24/description
+ Kernel module for most I2C EEPROMs
endef
-$(eval $(call KernelPackage,crc16))
+$(eval $(call KernelPackage,eeprom-at24))
-define KernelPackage/eeprom-93cx6
+define KernelPackage/eeprom-at25
SUBMENU:=$(OTHER_MENU)
- TITLE:=EEPROM 93CX6 support
- KCONFIG:=CONFIG_EEPROM_93CX6
- FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
+ TITLE:=EEPROM AT25 support
+ KCONFIG:=CONFIG_EEPROM_AT25
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
+ AUTOLOAD:=$(call AutoLoad,61,at25)
endef
-define KernelPackage/eeprom-93cx6/description
- Kernel module for EEPROM 93CX6 support
+define KernelPackage/eeprom-at25/description
+ Kernel module for most SPI EEPROMs
endef
-$(eval $(call KernelPackage,eeprom-93cx6))
+$(eval $(call KernelPackage,eeprom-at25))
define KernelPackage/gpio-cs5535
SUBMENU:=$(OTHER_MENU)
TITLE:=AMD CS5535/CS5536 GPIO driver
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 @LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_35||LINUX_2_6_36||LINUX_2_6_37
KCONFIG:=CONFIG_CS5535_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.ko
AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
endef
$(eval $(call KernelPackage,gpio-cs5535))
+define KernelPackage/gpio-cs5535-new
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AMD CS5535/CS5536 GPIO driver with improved sysfs support
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32)
+ KCONFIG:=CONFIG_GPIO_CS5535
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.1.0)),1)
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-cs5535.ko
+ AUTOLOAD:=$(call AutoLoad,50,gpio-cs5535)
+else
+ FILES:=$(LINUX_DIR)/drivers/gpio/cs5535-gpio.ko
+ AUTOLOAD:=$(call AutoLoad,50,cs5535-gpio)
+endif
+endef
+
+define KernelPackage/gpio-cs5535-new/description
+ This package contains the new AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,gpio-cs5535-new))
+
+
define KernelPackage/gpio-dev
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic GPIO char device support
DEPENDS:=@GPIO_SUPPORT
KCONFIG:=CONFIG_GPIO_DEVICE
- FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
endef
TITLE:=Natsemi GPIO support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_NSC_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.ko
AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
TITLE:=PC8736x GPIO support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_PC8736x_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.ko
AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
endef
TITLE:=Natsemi SCX200 GPIO support
DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
KCONFIG:=CONFIG_SCx200_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.ko
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
TITLE:=NXP 74HC164 GPIO expander support
DEPENDS:=@TARGET_brcm63xx
KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
endef
define KernelPackage/hid
SUBMENU:=$(OTHER_MENU)
TITLE:=HID Devices
- DEPENDS:=+kmod-input-evdev
KCONFIG:=CONFIG_HID
- FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
AUTOLOAD:=$(call AutoLoad,61,hid)
- $(call SetDepends/hid)
- $(call AddDepends/input)
+ $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/hid/description
SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
KCONFIG:=CONFIG_INPUT
- $(call SetDepends/input)
- FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
AUTOLOAD:=$(call AutoLoad,19,input-core)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=Input event device
KCONFIG:=CONFIG_INPUT_EVDEV
- FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
AUTOLOAD:=$(call AutoLoad,60,evdev)
$(call AddDepends/input)
endef
KCONFIG:= \
CONFIG_INPUT_GPIO_BUTTONS \
CONFIG_INPUT_MISC=y
- FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO key support
DEPENDS:= @GPIO_SUPPORT
- KCONFIG:=CONFIG_KEYBOARD_GPIO
- FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:= \
+ CONFIG_KEYBOARD_GPIO \
+ CONFIG_INPUT_KEYBOARD=y
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
$(call AddDepends/input)
endef
$(eval $(call KernelPackage,input-gpio-keys))
+define KernelPackage/input-gpio-keys-polled
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO key support
+ DEPENDS:=@GPIO_SUPPORT @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_34||LINUX_2_6_35||LINUX_2_6_36) +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_KEYBOARD_GPIO_POLLED \
+ CONFIG_INPUT_KEYBOARD=y
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
+ AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/input-gpio-keys-polled/description
+ Kernel module for support polled GPIO keys input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys-polled))
+
+
define KernelPackage/input-gpio-encoder
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO rotay encoder
KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
- FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
$(call AddDepends/input,@GPIO_SUPPORT)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=Joystick device support
KCONFIG:=CONFIG_INPUT_JOYDEV
- FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
AUTOLOAD:=$(call AutoLoad,62,joydev)
$(call AddDepends/input)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=Polled Input device support
KCONFIG:=CONFIG_INPUT_POLLDEV
- FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
AUTOLOAD:=$(call AutoLoad,20,input-polldev)
$(call AddDepends/input)
endef
$(eval $(call KernelPackage,input-polldev))
-define KernelPackage/leds-alix
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines ALIX LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_ALIX2
- FILES:=$(LINUX_DIR)/drivers/leds/leds-alix2.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-alix2)
-endef
-
-define KernelPackage/leds-alix/description
- Kernel module for PCengines ALIX LEDs
-endef
-
-$(eval $(call KernelPackage,leds-alix))
-
-
-define KernelPackage/leds-gpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=GPIO LED support
- DEPENDS:= @GPIO_SUPPORT
- KCONFIG:=CONFIG_LEDS_GPIO
- FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
-endef
-
-define KernelPackage/leds-gpio/description
- Kernel module for LEDs on GPIO lines
-endef
-
-$(eval $(call KernelPackage,leds-gpio))
-
-
-define KernelPackage/leds-net48xx
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
- KCONFIG:=CONFIG_LEDS_NET48XX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
-endef
-
-define KernelPackage/leds-net48xx/description
- Kernel module for Soekris Net48xx LEDs
-endef
-
-$(eval $(call KernelPackage,leds-net48xx))
-
-
-define KernelPackage/leds-rb750
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RouterBOARD 750 LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_RB750
- FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,leds-rb750)
-endef
-
-define KernelPackage/leds-rb750/description
- Kernel module for the LEDs on the MikroTik RouterBOARD 750.
-endef
-
-$(eval $(call KernelPackage,leds-rb750))
-
-
-define KernelPackage/leds-wndr3700-usb
- SUBMENU:=$(OTHER_MENU)
- TITLE:=WNDR3700 USB LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_WNDR3700_USB
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
-endef
-
-define KernelPackage/leds-wndr3700-usb/description
- Kernel module for the USB LED on the NETGWR WNDR3700 board.
-endef
-
-$(eval $(call KernelPackage,leds-wndr3700-usb))
-
-
-define KernelPackage/leds-wrap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
- KCONFIG:=CONFIG_LEDS_WRAP
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
-endef
-
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
-endef
-
-$(eval $(call KernelPackage,leds-wrap))
-
-
-define KernelPackage/ledtrig-morse
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED Morse Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
-endef
-
-define KernelPackage/ledtrig-morse/description
- Kernel module to show morse coded messages on LEDs.
-endef
-
-$(eval $(call KernelPackage,ledtrig-morse))
-
-
-define KernelPackage/ledtrig-netdev
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED NETDEV Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
-endef
-
-define KernelPackage/ledtrig-netdev/description
- Kernel module to drive LEDs based on network activity.
-endef
-
-$(eval $(call KernelPackage,ledtrig-netdev))
-
-
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
CONFIG_PRINTER \
CONFIG_PPDEV
FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/lp.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
endef
TITLE:=Amtel MMC Support
DEPENDS:=@TARGET_avr32 +kmod-mmc
KCONFIG:=CONFIG_MMC_ATMELMCI
- FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.ko
AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
endef
$(eval $(call KernelPackage,mmc-atmelmci,1))
+define KernelPackage/oprofile
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=OProfile profiling support
+ KCONFIG:=CONFIG_OPROFILE
+ FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
+ DEPENDS:=@KERNEL_PROFILING
+endef
+
+define KernelPackage/oprofile/description
+ Kernel module for support for oprofile system profiling.
+endef
+
+$(eval $(call KernelPackage,oprofile))
+
+
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
CONFIG_RFKILL \
CONFIG_RFKILL_INPUT=y \
CONFIG_RFKILL_LEDS=y
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.31)),1)
+ifeq ($(CONFIG_LINUX_2_6_30),)
FILES:= \
- $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
else
FILES:= \
- $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/net/rfkill/rfkill.ko \
+ $(LINUX_DIR)/net/rfkill/rfkill-input.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
endif
$(call SetDepends/rfkill)
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
CONFIG_SSB_POSSIBLE=y \
CONFIG_SSB_SPROM=y \
CONFIG_SSB_SILENT=y
- FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
AUTOLOAD:=$(call AutoLoad,29,ssb)
endef
$(eval $(call KernelPackage,ssb))
-define KernelPackage/textsearch
-SUBMENU:=$(OTHER_MENU)
- TITLE:=Textsearch support is selected if needed
- KCONFIG:= \
- CONFIG_TEXTSEARCH=y \
- CONFIG_TEXTSEARCH_KMP \
- CONFIG_TEXTSEARCH_BM \
- CONFIG_TEXTSEARCH_FSM
- FILES:= \
- $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+define KernelPackage/bcma
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BCMA support
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ KCONFIG:=\
+ CONFIG_BCMA \
+ CONFIG_BCMA_POSSIBLE=y \
+ CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+ CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_DRIVER_MIPS=n \
+ CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+ CONFIG_BCMA_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+ AUTOLOAD:=$(call AutoLoad,29,bcma)
endef
-$(eval $(call KernelPackage,textsearch))
+define KernelPackage/bcma/description
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
+endef
+
+$(eval $(call KernelPackage,bcma))
define KernelPackage/wdt-geode
SUBMENU:=$(OTHER_MENU)
TITLE:=Geode/LX Watchdog timer
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
KCONFIG:=CONFIG_GEODE_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
AUTOLOAD:=$(call AutoLoad,50,geodewdt)
endef
$(eval $(call KernelPackage,wdt-geode))
+define KernelPackage/cs5535-clockevt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/CS5536 high-res timer (MFGPT) events
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
+ KCONFIG:=CONFIG_CS5535_CLOCK_EVENT_SRC
+ FILES:=$(LINUX_DIR)/drivers/clocksource/cs5535-clockevt.ko
+ AUTOLOAD:=$(call AutoLoad,50,cs5535-clockevt)
+endef
+
+define KernelPackage/cs5535-clockevt/description
+ Kernel module for CS5535/6 high-res clock event source
+endef
+
+$(eval $(call KernelPackage,cs5535-clockevt))
+
+
+define KernelPackage/cs5535-mfgpt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/6 Multifunction General Purpose Timer
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd
+ KCONFIG:=CONFIG_CS5535_MFGPT
+ FILES:=$(LINUX_DIR)/drivers/misc/cs5535-mfgpt.ko
+ AUTOLOAD:=$(call AutoLoad,45,cs5535-mfgpt)
+endef
+
+define KernelPackage/cs5535-mfgpt/description
+ Kernel module for CS5535/6 multifunction general purpose timer.
+endef
+
+$(eval $(call KernelPackage,cs5535-mfgpt))
+
+
+define KernelPackage/cs5535-mfd
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/6 Multifunction General Purpose Driver
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_MFD_CS5535
+ FILES:= \
+ $(LINUX_DIR)/drivers/mfd/mfd-core.ko \
+ $(LINUX_DIR)/drivers/mfd/cs5535-mfd.ko
+ AUTOLOAD:=$(call AutoLoad,44,mfd-core cs5535-mfd)
+endef
+
+define KernelPackage/cs5535-mfd/description
+ Core driver for CS5535/CS5536 MFD functions.
+endef
+
+$(eval $(call KernelPackage,cs5535-mfd))
+
+
+define KernelPackage/wdt-omap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=OMAP Watchdog timer
+ DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
+ KCONFIG:=CONFIG_OMAP_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
+endef
+
+define KernelPackage/wdt-omap/description
+ Kernel module for TI omap watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-omap))
+
+
+define KernelPackage/wdt-orion
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Orion Watchdog timer
+ DEPENDS:=@TARGET_orion
+ KCONFIG:=CONFIG_ORION_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
+endef
+
+define KernelPackage/wdt-orion/description
+ Kernel module for Marvell orion watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-orion))
+
+
define KernelPackage/wdt-sc520
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SC520 Watchdog support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SC520_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
endef
TITLE:=Natsemi SCX200 Watchdog support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SCx200_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
$(eval $(call KernelPackage,wdt-scx200))
+define KernelPackage/wdt-ath79
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Atheros AR7XXX/AR9XXX watchdog timer
+ DEPENDS:=@TARGET_ar71xx
+ KCONFIG:=CONFIG_ATH79_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/ath79_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,ath79_wdt)
+endef
+
+define KernelPackage/wdt-ath79/description
+ Kernel module for AR7XXX/AR9XXX watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-ath79))
+
+
+define KernelPackage/booke-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PowerPC Book-E Watchdog Timer
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
+ KCONFIG:=CONFIG_BOOKE_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
+endef
+
+define KernelPackage/booke-wdt/description
+ Kernel module for PowerPC Book-E Watchdog Timer.
+endef
+
+$(eval $(call KernelPackage,booke-wdt))
+
+
+define KernelPackage/pwm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PWM generic API
+ KCONFIG:=CONFIG_GENERIC_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
+ AUTOLOAD:=$(call AutoLoad,50,pwm)
+endef
+
+define KernelPackage/pwm/description
+ Kernel module that implement a generic PWM API
+endef
+
+$(eval $(call KernelPackage,pwm))
+
+
define KernelPackage/pwm-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=PWM over GPIO
- KCONFIG:=CONFIG_GENERIC_PWM \
- CONFIG_GPIO_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.$(LINUX_KMOD_SUFFIX)
+ DEPENDS:=+kmod-pwm
+ KCONFIG:=CONFIG_GPIO_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
endef
endef
$(eval $(call KernelPackage,pwm-gpio))
+
+define KernelPackage/rtc-core-2.6
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39
+ TITLE:=Real Time Clock class support
+ KCONFIG:=CONFIG_RTC_CLASS
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-core.ko
+ AUTOLOAD:=$(call AutoLoad,29,rtc-core)
+endef
+
+define KernelPackage/rtc-core-2.6/description
+ Generic RTC class support.
+endef
+
+$(eval $(call KernelPackage,rtc-core-2.6))
+
+define KernelPackage/rtc-core-3.x
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39)
+ TITLE:=Real Time Clock class support
+ KCONFIG:=CONFIG_RTC_CLASS=y
+endef
+
+define KernelPackage/rtc-core-3.x/description
+ Generic RTC class support.
+endef
+
+$(eval $(call KernelPackage,rtc-core-3.x))
+
+define KernelPackage/rtc-pcf8563
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF8563/Epson RTC8564 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+endef
+
+define KernelPackage/rtc-pcf8563/description
+ Kernel module for Philips PCF8563 RTC chip.
+ The Epson RTC8564 should work as well.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf8563))
+
+
+define KernelPackage/rtc-pcf2123
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF2123 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
+endef
+
+define KernelPackage/rtc-pcf2123/description
+ Kernel module for Philips PCF2123 RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf2123))
+
+define KernelPackage/rtc-pt7c4338
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Pericom PT7C4338 RTC support
+ $(call AddDepends/rtc,+kmod-i2c-core)
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
+endef
+
+define KernelPackage/rtc-pt7c4338/description
+ Kernel module for Pericom PT7C4338 i2c RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pt7c4338))
+
+define KernelPackage/n810bm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Nokia N810 battery management driver
+ DEPENDS:=@TARGET_omap24xx
+ KCONFIG:=CONFIG_N810BM
+ FILES:=$(LINUX_DIR)/drivers/cbus/n810bm.ko
+ AUTOLOAD:=$(call AutoLoad,01,n810bm)
+endef
+
+define KernelPackage/n810bm/description
+ Nokia N810 battery management driver.
+ Controls battery power management and battery charging.
+endef
+
+$(eval $(call KernelPackage,n810bm))
+
+
+define KernelPackage/mtdtests
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MTD subsystem tests
+ KCONFIG:=CONFIG_MTD_TESTS
+ FILES:=\
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
+endef
+
+define KernelPackage/mtdtests/description
+ Kernel modules for MTD subsystem/driver testing.
+endef
+
+$(eval $(call KernelPackage,mtdtests))
+
+
+define KernelPackage/nand
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NAND flash support
+ DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39)
+ KCONFIG:=CONFIG_MTD_NAND \
+ CONFIG_MTD_NAND_IDS \
+ CONFIG_MTD_NAND_ECC
+ FILES:= \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand.ko
+ AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
+endef
+
+define KernelPackage/nand/description
+ Kernel module for NAND support.
+endef
+
+$(eval $(call KernelPackage,nand))
+
+
+define KernelPackage/nandsim
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NAND simulator
+ DEPENDS:=@!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39) +kmod-nand
+ KCONFIG:=CONFIG_MTD_NAND_NANDSIM
+ FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
+endef
+
+define KernelPackage/nandsim/description
+ Kernel module for NAND flash simulation.
+endef
+
+$(eval $(call KernelPackage,nandsim))
+
+define KernelPackage/serial-8250
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_NR_UARTS=16 \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_SHARE_IRQ=y \
+ CONFIG_SERIAL_8250_DETECT_IRQ=n \
+ CONFIG_SERIAL_8250_RSA=n
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.3)),1)
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
+else
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.38)),1)
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250.ko
+ else
+ FILES:=$(LINUX_DIR)/drivers/serial/8250.ko
+ endif
+endif
+endef
+
+define KernelPackage/serial-8250/description
+ Kernel module for 8250 UART based serial ports.
+endef
+
+$(eval $(call KernelPackage,serial-8250))
+
+
+define KernelPackage/acpi-button
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ACPI Button Support
+ DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
+ KCONFIG:=CONFIG_ACPI_BUTTON
+ FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
+ AUTOLOAD:=$(call AutoLoad,06,button)
+endef
+
+define KernelPackage/acpi-button/description
+ Kernel module for ACPI Button support
+endef
+
+$(eval $(call KernelPackage,acpi-button))
projects / openwrt / svn-archive / archive.git / blobdiff