#
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
OTHER_MENU:=Other modules
-define KernelPackage/block2mtd
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Block device MTD emulation
- KCONFIG:=CONFIG_MTD_BLOCK2MTD
- FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.$(LINUX_KMOD_SUFFIX)
-endef
-$(eval $(call KernelPackage,block2mtd))
-
define KernelPackage/crc-itu-t
SUBMENU:=$(OTHER_MENU)
TITLE:=CRC ITU-T V.41 support
KCONFIG:=CONFIG_CRC16
FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,crc16,1)
+ $(call SetDepends/crc16)
endef
define KernelPackage/crc16/description
$(eval $(call KernelPackage,lp))
-define KernelPackage/pcspkr
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PC speaker support
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_INPUT_PCSPKR
- FILES:= \
- $(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50, \
- pcspkr \
- )
-endef
-
-define KernelPackage/pcspkr/description
- This enables sounds (tones) through the pc speaker
-endef
-
-$(eval $(call KernelPackage,pcspkr))
-
-define KernelPackage/pcmcia-core
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PCMCIA/CardBus support
- DEPENDS:=@PCMCIA_SUPPORT
- KCONFIG:= \
- CONFIG_PCMCIA \
- CONFIG_CARDBUS \
- CONFIG_PCCARD \
- PCMCIA_DEBUG=n
-endef
-
-define KernelPackage/pcmcia-core/2.4
-# KCONFIG:= \
-# CONFIG_PCMCIA \
-# CONFIG_CARDBUS
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,25,pcmcia_core ds yenta_socket)
-endef
-
-define KernelPackage/pcmcia-core/2.6
-# KCONFIG:= \
-# CONFIG_PCCARD \
-# CONFIG_PCMCIA \
-# PCMCIA_DEBUG=n
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia)
-endef
-
-define KernelPackage/pcmcia-core/description
- Kernel support for PCMCIA/CardBus controllers
-endef
-
-$(eval $(call KernelPackage,pcmcia-core))
-
-
-define KernelPackage/pcmcia-yenta
- SUBMENU:=$(OTHER_MENU)
- TITLE:=yenta socket driver
- DEPENDS:=@LINUX_2_6 kmod-pcmcia-core
- KCONFIG:= \
- CONFIG_PCCARD_NONSTATIC \
- CONFIG_YENTA
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,rsrc_nonstatic yenta_socket)
-endef
-
-$(eval $(call KernelPackage,pcmcia-yenta))
-
-
-define KernelPackage/pcmcia-au1000
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RMI/AMD Au1000 PCMCIA support
- DEPENDS:=kmod-pcmcia-core @TARGET_au1000
- FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
-endef
-
-$(eval $(call KernelPackage,pcmcia-au1000))
-
-define KernelPackage/pcmcia-bcm63xx
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Broadcom BCM63xx PCMCIA support
- DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
- KCONFIG:=CONFIG_PCMCIA_BCM63XX
- FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
-endef
-
-define KernelPackage/pcmcia-bcm63xx/description
- Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
-endef
-
-$(eval $(call KernelPackage,pcmcia-bcm63xx))
-
-define KernelPackage/pcmcia-serial
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial devices support
- DEPENDS:=kmod-pcmcia-core
- KCONFIG:= \
- CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
- AUTOLOAD:=$(call AutoLoad,45,serial_cs)
-endef
-
-define KernelPackage/pcmcia-serial/2.4
-# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
- FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/pcmcia-serial/2.6
-# KCONFIG:=CONFIG_SERIAL_8250_CS
- FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/pcmcia-serial/description
- Kernel support for PCMCIA/CardBus serial devices
-endef
-
-$(eval $(call KernelPackage,pcmcia-serial))
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +!TARGET_x86:kmod-hid
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
CONFIG_BT_HIDP
+ $(call AddDepends/crc16)
+ $(call AddDepends/hid)
+ $(call AddDepends/rfkill)
endef
define KernelPackage/bluetooth/2.4
$(eval $(call KernelPackage,mmc))
-define KernelPackage/mmc-at91
- SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD Card Support on AT91
- DEPENDS:=@TARGET_at91 +kmod-mmc
- KCONFIG:=CONFIG_MMC_AT91
- FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,at91_mci,1)
-endef
-
-define KernelPackage/mmc-at91/description
- Kernel support for MMC/SD cards on the AT91 target
-endef
-
-$(eval $(call KernelPackage,mmc-at91))
-
-
# XXX: added a workaround for watchdog path changes
ifeq ($(KERNEL),2.4)
WATCHDOG_DIR=char
endif
WATCHDOG_DIR?=watchdog
-define KernelPackage/atmel-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=AT32AP700x watchdog
- DEPENDS:=@TARGET_avr32
- KCONFIG:=CONFIG_AT32AP700X_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
-endef
-
-define KernelPackage/atmel-wdt/description
- AT32AP700x watchdog
-endef
-
-$(eval $(call KernelPackage,atmel-wdt))
-
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,softdog))
-define KernelPackage/rdc321x-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RDC321x watchdog
- DEPENDS:=@TARGET_rdc
- KCONFIG:=CONFIG_RDC321X_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
-endef
-
-define KernelPackage/rdc321x-wdt/description
- RDC-321x watchdog driver
-endef
-
-$(eval $(call KernelPackage,rdc321x-wdt))
-
define KernelPackage/leds-gpio
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,leds-gpio))
-define KernelPackage/ledtrig-adm5120-switch
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED ADM5120 Switch Port Status Trigger
- DEPENDS:=@TARGET_adm5120
- KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
-endef
-
-define KernelPackage/ledtrig-adm5120-switch/description
- Kernel module to allow LEDs to be controlled by the port states
- of the ADM5120 built-in ethernet switch.
-endef
-
-$(eval $(call KernelPackage,ledtrig-adm5120-switch))
-
-
define KernelPackage/leds-net48xx
SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
define KernelPackage/leds-wndr3700-usb
SUBMENU:=$(OTHER_MENU)
TITLE:=WNDR3700 USB LED support
- DEPENDS:= @TARGET_ar71xx
+ DEPENDS:=@TARGET_ar71xx
KCONFIG:=CONFIG_LEDS_WNDR3700_USB
FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
define KernelPackage/input-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
- DEPENDS:=@LINUX_2_6 @!TARGET_x86
+ DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,19,input-core)
+ $(call SetDepends/input)
endef
define KernelPackage/input-core/description
define KernelPackage/input-evdev
SUBMENU:=$(OTHER_MENU)
TITLE:=Input event device
- DEPENDS:=+!TARGET_x86:kmod-input-core
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,evdev)
+ $(call AddDepends/input)
endef
define KernelPackage/input-evdev/description
define KernelPackage/hid
SUBMENU:=$(OTHER_MENU)
TITLE:=HID Devices
- DEPENDS:=+kmod-input-core +kmod-input-evdev @!TARGET_x86
+ DEPENDS:=+kmod-input-evdev
KCONFIG:=CONFIG_HID
FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,61,hid)
+ $(call SetDepends/hid)
+ $(call AddDepends/input)
endef
define KernelPackage/hid/description
define KernelPackage/input-polldev
SUBMENU:=$(OTHER_MENU)
TITLE:=Polled Input device support
- DEPENDS:=+!TARGET_x86:kmod-input-core @LINUX_2_6
+ DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT_POLLDEV
FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+ $(call AddDepends/input)
endef
define KernelPackage/input-polldev/description
define KernelPackage/input-gpio-keys
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO key support
- DEPENDS:= @GPIO_SUPPORT +!TARGET_x86:kmod-input-core
+ DEPENDS:= @GPIO_SUPPORT
KCONFIG:=CONFIG_KEYBOARD_GPIO
FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+ $(call AddDepends/input)
endef
define KernelPackage/input-gpio-keys/description
define KernelPackage/input-joydev
SUBMENU:=$(OTHER_MENU)
TITLE:=Joystick device support
- DEPENDS:=+!TARGET_x86:kmod-input-core
KCONFIG:=CONFIG_INPUT_JOYDEV
FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,62,joydev)
+ $(call AddDepends/input)
endef
define KernelPackage/input-joydev/description
$(eval $(call KernelPackage,input-joydev))
-define KernelPackage/input-rb532
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RB532 button device support
- DEPENDS:=+kmod-input-core @TARGET_rb532
- KCONFIG:= \
- CONFIG_INPUT_MISC=y \
- CONFIG_INPUT_RB532_BUTTON
- FILES:=$(LINUX_DIR)/drivers/input/misc/rb532_button.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,62,rb532_button)
-endef
-
-define KernelPackage/input-rb532/description
- Kernel module for RB532 button
-endef
-
-$(eval $(call KernelPackage,input-rb532))
-
-
define KernelPackage/mmc-atmelmci
SUBMENU:=$(OTHER_MENU)
TITLE:=Amtel MMC Support
$(eval $(call KernelPackage,cs5535-gpio))
-define KernelPackage/ixp4xx-beeper
- SUBMENU:=$(OTHER_MENU)
- TITLE:=IXP4XX Beeper support
- DEPENDS:=@TARGET_ixp4xx +kmod-input-core
- KCONFIG:= \
- CONFIG_INPUT_MISC=y \
- CONFIG_INPUT_IXP4XX_BEEPER
- FILES:=$(LINUX_DIR)/drivers/input/misc/ixp4xx-beeper.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ixp4xx-beeper)
-endef
-
-define KernelPackage/ixp4xx-beeper/description
- IXP4XX Beeper support
-endef
-
-$(eval $(call KernelPackage,ixp4xx-beeper))
-
-
define KernelPackage/textsearch
SUBMENU:=$(OTHER_MENU)
TITLE:=Textsearch support is selected if needed
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
- DEPENDS:=@TARGET_x86||TARGET_s3c24xx||TARGET_brcm47xx||TARGET_ar71xx
KCONFIG:= \
CONFIG_RFKILL \
CONFIG_RFKILL_INPUT=y \
$(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
endif
+ $(call SetDepends/rfkill)
endef
define KernelPackage/rfkill/description
projects / openwrt / svn-archive / archive.git / blobdiff