#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
OTHER_MENU:=Other modules
-define KernelPackage/crc-itu-t
+WATCHDOG_DIR:=watchdog
+
+
+define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC ITU-T V.41 support
- KCONFIG:=CONFIG_CRC_ITU_T
- FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+ TITLE:=Bluetooth support
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core
+ KCONFIG:= \
+ CONFIG_BLUEZ \
+ CONFIG_BLUEZ_L2CAP \
+ CONFIG_BLUEZ_SCO \
+ CONFIG_BLUEZ_RFCOMM \
+ CONFIG_BLUEZ_BNEP \
+ CONFIG_BLUEZ_HCIUART \
+ CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BLUEZ_HIDP \
+ CONFIG_BT \
+ CONFIG_BT_L2CAP=y \
+ CONFIG_BT_SCO=y \
+ CONFIG_BT_RFCOMM \
+ CONFIG_BT_BNEP \
+ CONFIG_BT_HCIBTUSB \
+ CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIUART \
+ CONFIG_BT_HCIUART_H4 \
+ CONFIG_BT_HIDP \
+ CONFIG_HID_SUPPORT=y
+ $(call AddDepends/crc16)
+ $(call AddDepends/hid)
+ $(call AddDepends/rfkill)
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
-define KernelPackage/crc-itu-t/description
- Kernel module for CRC ITU-T V.41 support
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
endef
-$(eval $(call KernelPackage,crc-itu-t))
+$(eval $(call KernelPackage,bluetooth))
-define KernelPackage/crc7
+define KernelPackage/bluetooth-hci-h4p
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC7 support
- KCONFIG:=CONFIG_CRC7
- FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc7)
+ TITLE:=HCI driver with H4 Nokia extensions
+ DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
+ KCONFIG:=CONFIG_BT_HCIH4P
+ FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
+ AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
endef
-define KernelPackage/crc7/description
- Kernel module for CRC7 support
+define KernelPackage/bluetooth-hci-h4p/description
+ HCI driver with H4 Nokia extensions
endef
-$(eval $(call KernelPackage,crc7))
+$(eval $(call KernelPackage,bluetooth-hci-h4p))
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
- DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
- FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
$(eval $(call KernelPackage,eeprom-93cx6))
-define KernelPackage/lp
+define KernelPackage/eeprom-at24
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
- DEPENDS:=@LINUX_2_4
- KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
- FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,parport lp)
+ TITLE:=EEPROM AT24 support
+ KCONFIG:=CONFIG_EEPROM_AT24
+ DEPENDS:=+kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
+ AUTOLOAD:=$(call AutoLoad,60,at24)
endef
-$(eval $(call KernelPackage,lp))
+define KernelPackage/eeprom-at24/description
+ Kernel module for most I2C EEPROMs
+endef
+
+$(eval $(call KernelPackage,eeprom-at24))
-define KernelPackage/pcmcia-core
+define KernelPackage/eeprom-at25
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCMCIA/CardBus support
- DEPENDS:=@PCMCIA_SUPPORT
- KCONFIG:= \
- CONFIG_PCMCIA \
- CONFIG_CARDBUS \
- CONFIG_PCCARD \
- CONFIG_YENTA \
- CONFIG_PCCARD_NONSTATIC \
- PCMCIA_DEBUG=n
-endef
-
-define KernelPackage/pcmcia-core/2.4
-# KCONFIG:= \
-# CONFIG_PCMCIA \
-# CONFIG_CARDBUS
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
-endef
-
-define KernelPackage/pcmcia-core/2.6
-# KCONFIG:= \
-# CONFIG_PCCARD \
-# CONFIG_PCMCIA \
-# CONFIG_YENTA \
-# CONFIG_PCCARD_NONSTATIC \
-# PCMCIA_DEBUG=n
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic yenta_socket)
+ TITLE:=EEPROM AT25 support
+ KCONFIG:=CONFIG_EEPROM_AT25
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
+ AUTOLOAD:=$(call AutoLoad,61,at25)
endef
-define KernelPackage/pcmcia-core/au1000-2.6
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
+define KernelPackage/eeprom-at25/description
+ Kernel module for most SPI EEPROMs
+endef
+
+$(eval $(call KernelPackage,eeprom-at25))
+
+
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
endef
-define KernelPackage/pcmcia-core/description
- Kernel support for PCMCIA/CardBus controllers
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
endef
-$(eval $(call KernelPackage,pcmcia-core))
+$(eval $(call KernelPackage,gpio-dev))
-define KernelPackage/pcmcia-serial
+define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial devices support
- DEPENDS:=kmod-pcmcia-core
+ TITLE:=NXP 74HC164 GPIO expander support
+ KCONFIG:=CONFIG_GPIO_NXP_74HC164
+ FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
+ AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
+endef
+
+define KernelPackage/gpio-nxp-74hc164/description
+ Kernel module for NXP 74HC164 GPIO expander
+endef
+
+$(eval $(call KernelPackage,gpio-nxp-74hc164))
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=HID Devices
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+ $(call AddDepends/input,+kmod-input-evdev)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-core
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input device core
+ KCONFIG:=CONFIG_INPUT
+ FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
+ AUTOLOAD:=$(call AutoLoad,19,input-core)
+endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
+$(eval $(call KernelPackage,input-core))
+
+
+define KernelPackage/input-evdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input event device
+ KCONFIG:=CONFIG_INPUT_EVDEV
+ FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
+ AUTOLOAD:=$(call AutoLoad,60,evdev)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
+$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
KCONFIG:= \
- CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
- AUTOLOAD:=$(call AutoLoad,45,serial_cs)
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
endef
-define KernelPackage/pcmcia-serial/2.4
-# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
- FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
endef
-define KernelPackage/pcmcia-serial/2.6
-# KCONFIG:=CONFIG_SERIAL_8250_CS
- FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+
+define KernelPackage/input-gpio-keys
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO key support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:= \
+ CONFIG_KEYBOARD_GPIO \
+ CONFIG_INPUT_KEYBOARD=y
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
+ AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+ $(call AddDepends/input)
endef
-define KernelPackage/pcmcia-serial/description
- Kernel support for PCMCIA/CardBus serial devices
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
endef
-$(eval $(call KernelPackage,pcmcia-serial))
+$(eval $(call KernelPackage,input-gpio-keys))
-# XXX: remove @!TARGET_* later when we have USB support properly detected on all targets
-define KernelPackage/bluetooth
+define KernelPackage/input-gpio-keys-polled
SUBMENU:=$(OTHER_MENU)
- TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT @!TARGET_atheros @!TARGET_uml
+ TITLE:=Polled GPIO key support
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
KCONFIG:= \
- CONFIG_BLUEZ \
- CONFIG_BLUEZ_L2CAP \
- CONFIG_BLUEZ_SCO \
- CONFIG_BLUEZ_RFCOMM \
- CONFIG_BLUEZ_BNEP \
- CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB \
- CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
- CONFIG_BT_RFCOMM \
- CONFIG_BT_BNEP \
- CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
-endef
-
-define KernelPackage/bluetooth/2.4
-# KCONFIG:= \
-# CONFIG_BLUEZ \
-# CONFIG_BLUEZ_L2CAP \
-# CONFIG_BLUEZ_SCO \
-# CONFIG_BLUEZ_RFCOMM \
-# CONFIG_BLUEZ_BNEP \
-# CONFIG_BLUEZ_HCIUART \
-# CONFIG_BLUEZ_HCIUSB
- FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb)
-endef
-
-define KernelPackage/bluetooth/2.6
-# KCONFIG:= \
-# CONFIG_BT \
-# CONFIG_BT_L2CAP \
-# CONFIG_BT_SCO \
-# CONFIG_BT_RFCOMM \
-# CONFIG_BT_BNEP \
-# CONFIG_BT_HCIUSB \
-# CONFIG_BT_HCIUART
- FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
+ CONFIG_KEYBOARD_GPIO_POLLED \
+ CONFIG_INPUT_KEYBOARD=y
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
+ AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
+ $(call AddDepends/input)
endef
-define KernelPackage/bluetooth/description
- Kernel support for Bluetooth devices
+define KernelPackage/input-gpio-keys-polled/description
+ Kernel module for support polled GPIO keys input device
endef
-$(eval $(call KernelPackage,bluetooth))
+$(eval $(call KernelPackage,input-gpio-keys-polled))
+
+
+define KernelPackage/input-gpio-encoder
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO rotay encoder
+ KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
+ FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
+ AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
+ $(call AddDepends/input,@GPIO_SUPPORT)
+endef
+
+define KernelPackage/gpio-encoder/description
+ Kernel module to use rotary encoders connected to GPIO pins
+endef
+
+$(eval $(call KernelPackage,input-gpio-encoder))
+
+
+define KernelPackage/input-joydev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Joystick device support
+ KCONFIG:=CONFIG_INPUT_JOYDEV
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
+ AUTOLOAD:=$(call AutoLoad,62,joydev)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
+ AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/lp
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port and line printer support
+ DEPENDS:=@BROKEN
+ KCONFIG:= \
+ CONFIG_PARPORT \
+ CONFIG_PRINTER \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/lp.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport lp)
+endef
+
+$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_SDHCI=n \
CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
-define KernelPackage/mmc-at91
+define KernelPackage/oprofile
SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD Card Support on AT91
- DEPENDS:=@TARGET_at91 +kmod-mmc
- KCONFIG:=CONFIG_MMC_AT91
- FILES:=$(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+ TITLE:=OProfile profiling support
+ KCONFIG:=CONFIG_OPROFILE
+ FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
+ DEPENDS:=@KERNEL_PROFILING
endef
-define KernelPackage/mmc-at91/description
- Kernel support for MMC/SD cards on the AT91 target
+define KernelPackage/oprofile/description
+ Kernel module for support for oprofile system profiling.
endef
-$(eval $(call KernelPackage,mmc-at91))
+$(eval $(call KernelPackage,oprofile))
-# XXX: added a workaround for watchdog path changes
-ifeq ($(KERNEL),2.4)
- WATCHDOG_DIR=char
-endif
-ifeq ($(KERNEL_PATCHVER),2.6.24)
- WATCHDOG_DIR=watchdog
-endif
-WATCHDOG_DIR?=char/watchdog
+define KernelPackage/rfkill
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RF switch subsystem support
+ KCONFIG:= \
+ CONFIG_RFKILL \
+ CONFIG_RFKILL_INPUT=y \
+ CONFIG_RFKILL_LEDS=y \
+ CONFIG_RFKILL_GPIO=y
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.ko
+ AUTOLOAD:=$(call AutoLoad,20,rfkill)
+ $(call SetDepends/rfkill)
+endef
+
+define KernelPackage/rfkill/description
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards.
+endef
+
+$(eval $(call KernelPackage,rfkill))
+
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
$(eval $(call KernelPackage,softdog))
-# XXX: remove @TARGET_* later when we are able to detect the exact version of the kernel
-define KernelPackage/leds-gpio
+define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
- TITLE:=GPIO LED support
- DEPENDS:=@TARGET_adm5120
- KCONFIG:=CONFIG_LEDS_GPIO
- FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
+ TITLE:=Silicon Sonics Backplane glue code
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ KCONFIG:=\
+ CONFIG_SSB \
+ CONFIG_SSB_B43_PCI_BRIDGE=y \
+ CONFIG_SSB_DRIVER_MIPS=n \
+ CONFIG_SSB_DRIVER_PCICORE=y \
+ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_PCIHOST=y \
+ CONFIG_SSB_PCIHOST_POSSIBLE=y \
+ CONFIG_SSB_POSSIBLE=y \
+ CONFIG_SSB_SPROM=y \
+ CONFIG_SSB_SILENT=y
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
+ AUTOLOAD:=$(call AutoLoad,29,ssb)
endef
-define KernelPackage/leds-gpio/description
- Kernel module for LEDs on GPIO lines
+define KernelPackage/ssb/description
+ Silicon Sonics Backplane glue code.
endef
-$(eval $(call KernelPackage,leds-gpio))
+$(eval $(call KernelPackage,ssb))
-define KernelPackage/leds-adm5120
+define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
- TITLE:=ADM5120 LED support
- DEPENDS:=@TARGET_adm5120 +kmod-leds-gpio
- KCONFIG:=CONFIG_LEDS_ADM5120
- FILES:=$(LINUX_DIR)/drivers/leds/leds-adm5120.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,59,leds-adm5120)
+ TITLE:=BCMA support
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ KCONFIG:=\
+ CONFIG_BCMA \
+ CONFIG_BCMA_POSSIBLE=y \
+ CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+ CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_DRIVER_MIPS=n \
+ CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+ CONFIG_BCMA_DRIVER_GMAC_CMN=n \
+ CONFIG_BCMA_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+ AUTOLOAD:=$(call AutoLoad,29,bcma)
endef
-define KernelPackage/leds-adm5120/description
- Kernel module for LEDs on ADM5120 based boards.
+define KernelPackage/bcma/description
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
endef
-$(eval $(call KernelPackage,leds-adm5120))
+$(eval $(call KernelPackage,bcma))
-define KernelPackage/ledtrig-adm5120-switch
+define KernelPackage/wdt-omap
SUBMENU:=$(OTHER_MENU)
- TITLE:=LED ADM5120 Switch Port Status Trigger
- DEPENDS:=@TARGET_adm5120
- KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
+ TITLE:=OMAP Watchdog timer
+ DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
+ KCONFIG:=CONFIG_OMAP_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
endef
-define KernelPackage/ledtrig-adm5120-switch/description
- Kernel module to allow LEDs to be controlled by the port states
- of the ADM5120 built-in ethernet switch.
+define KernelPackage/wdt-omap/description
+ Kernel module for TI omap watchdog timer.
endef
-$(eval $(call KernelPackage,ledtrig-adm5120-switch))
+$(eval $(call KernelPackage,wdt-omap))
-define KernelPackage/leds-net48xx
+define KernelPackage/wdt-orion
SUBMENU:=$(OTHER_MENU)
- TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_NET48XX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
+ TITLE:=Marvell Orion Watchdog timer
+ DEPENDS:=@TARGET_orion||@TARGET_kirkwood
+ KCONFIG:=CONFIG_ORION_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
endef
-define KernelPackage/leds-net48xx/description
- Kernel module for Soekris Net48xx LEDs
+define KernelPackage/wdt-orion/description
+ Kernel module for Marvell orion watchdog timer.
endef
-$(eval $(call KernelPackage,leds-net48xx))
+$(eval $(call KernelPackage,wdt-orion))
-define KernelPackage/leds-wrap
+define KernelPackage/booke-wdt
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_WRAP
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+ TITLE:=PowerPC Book-E Watchdog Timer
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
+ KCONFIG:=CONFIG_BOOKE_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
endef
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
+define KernelPackage/booke-wdt/description
+ Kernel module for PowerPC Book-E Watchdog Timer.
endef
-$(eval $(call KernelPackage,leds-wrap))
+$(eval $(call KernelPackage,booke-wdt))
-define KernelPackage/leds-alix
+define KernelPackage/pwm
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines ALIX LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_ALIX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+ TITLE:=PWM generic API
+ KCONFIG:=CONFIG_GENERIC_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
+ AUTOLOAD:=$(call AutoLoad,50,pwm)
endef
-define KernelPackage/leds-alix/description
- Kernel module for PCengines ALIX LEDs
+define KernelPackage/pwm/description
+ Kernel module that implement a generic PWM API
endef
-$(eval $(call KernelPackage,leds-alix))
+$(eval $(call KernelPackage,pwm))
-define KernelPackage/ledtrig-netdev
+define KernelPackage/pwm-gpio
SUBMENU:=$(OTHER_MENU)
- TITLE:=LED NETDEV Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+ TITLE:=PWM over GPIO
+ DEPENDS:=+kmod-pwm
+ KCONFIG:=CONFIG_GPIO_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
+ AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
endef
-define KernelPackage/ledtrig-netdev/description
- Kernel module to drive LEDs based on network activity.
+define KernelPackage/pwm-gpio/description
+ Kernel module to models a single-channel PWM device using a timer and a GPIO pin
endef
-$(eval $(call KernelPackage,ledtrig-netdev))
+$(eval $(call KernelPackage,pwm-gpio))
-define KernelPackage/ledtrig-morse
+define KernelPackage/rtc-marvell
SUBMENU:=$(OTHER_MENU)
- TITLE:=LED Morse Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+ TITLE:=Marvell SoC built-in RTC support
+ $(call AddDepends/rtc)
+ DEPENDS+=@TARGET_kirkwood||TARGET_orion
+ KCONFIG:=CONFIG_RTC_DRV_MV
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
endef
-define KernelPackage/ledtrig-morse/description
- Kernel module to show morse coded messages on LEDs.
+define KernelPackage/rtc-marvell/description
+ Kernel module for Marvell SoC built-in RTC.
endef
-$(eval $(call KernelPackage,ledtrig-morse))
+$(eval $(call KernelPackage,rtc-marvell))
-
-define KernelPackage/nsc-gpio
+define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi GPIO support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_NSC_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
+ TITLE:=Philips PCF8563/Epson RTC8564 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+endef
+
+define KernelPackage/rtc-pcf8563/description
+ Kernel module for Philips PCF8563 RTC chip.
+ The Epson RTC8564 should work as well.
endef
-define KernelPackage/nsc-gpio/description
- Kernel module for Natsemi GPIO
+$(eval $(call KernelPackage,rtc-pcf8563))
+
+
+define KernelPackage/rtc-pcf2123
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF2123 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
endef
-$(eval $(call KernelPackage,nsc-gpio))
+define KernelPackage/rtc-pcf2123/description
+ Kernel module for Philips PCF2123 RTC chip.
+endef
+$(eval $(call KernelPackage,rtc-pcf2123))
-define KernelPackage/scx200-gpio
+define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 GPIO support
- DEPENDS:=@TARGET_x86 kmod-nsc-gpio
- KCONFIG:=CONFIG_SCx200_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
+ TITLE:=Pericom PT7C4338 RTC support
+ $(call AddDepends/rtc,+kmod-i2c-core)
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
endef
-define KernelPackage/scx200-gpio/description
- Kernel module for SCX200 GPIO
+define KernelPackage/rtc-pt7c4338/description
+ Kernel module for Pericom PT7C4338 i2c RTC chip.
endef
-$(eval $(call KernelPackage,scx200-gpio))
+$(eval $(call KernelPackage,rtc-pt7c4338))
-define KernelPackage/scx200-wdt
+define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 Watchdog support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
+ TITLE:=MTD subsystem tests
+ KCONFIG:=CONFIG_MTD_TESTS
+ FILES:=\
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
endef
-define KernelPackage/scx200-wdt/description
- Kernel module for SCX200 Watchdog
+define KernelPackage/mtdtests/description
+ Kernel modules for MTD subsystem/driver testing.
endef
-$(eval $(call KernelPackage,scx200-wdt))
+$(eval $(call KernelPackage,mtdtests))
-define KernelPackage/input-core
+define KernelPackage/nand
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input device core
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_INPUT
- FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,input-core)
+ TITLE:=NAND flash support
+ DEPENDS:=@!LINUX_2_6_39
+ KCONFIG:=CONFIG_MTD_NAND \
+ CONFIG_MTD_NAND_IDS \
+ CONFIG_MTD_NAND_ECC
+ FILES:= \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand.ko
+ AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
endef
-define KernelPackage/input-core/description
- Kernel modules for support of input device
+define KernelPackage/nand/description
+ Kernel module for NAND support.
endef
-$(eval $(call KernelPackage,input-core))
+$(eval $(call KernelPackage,nand))
-define KernelPackage/input-evdev
+define KernelPackage/nandsim
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input even device
- DEPENDS:=+kmod-input-core
- KCONFIG:=CONFIG_INPUT_EVDEV
- FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,evdev)
+ TITLE:=NAND simulator
+ DEPENDS:=+kmod-nand
+ KCONFIG:=CONFIG_MTD_NAND_NANDSIM
+ FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
endef
-define KernelPackage/input-evdev/description
- Kernel modules for support of input device events
+define KernelPackage/nandsim/description
+ Kernel module for NAND flash simulation.
endef
-$(eval $(call KernelPackage,input-evdev))
+$(eval $(call KernelPackage,nandsim))
+
+define KernelPackage/serial-8250
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_NR_UARTS=16 \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_SHARE_IRQ=y \
+ CONFIG_SERIAL_8250_DETECT_IRQ=n \
+ CONFIG_SERIAL_8250_RSA=n
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
+endef
+
+define KernelPackage/serial-8250/description
+ Kernel module for 8250 UART based serial ports.
+endef
+
+$(eval $(call KernelPackage,serial-8250))
-define KernelPackage/mmc-spi
+define KernelPackage/acpi-button
SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD over SPI Support
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_MMC_SPI
- FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
+ TITLE:=ACPI Button Support
+ DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
+ KCONFIG:=CONFIG_ACPI_BUTTON
+ FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
+ AUTOLOAD:=$(call AutoLoad,06,button)
endef
-define KernelPackage/mmc-spi/description
- Kernel support for MMC/SD over SPI
+define KernelPackage/acpi-button/description
+ Kernel module for ACPI Button support
endef
-$(eval $(call KernelPackage,mmc-spi))
+$(eval $(call KernelPackage,acpi-button))
-define KernelPackage/spi
+define KernelPackage/regmap
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@LINUX_2_6 +kmod-crc-itu-t +kmod-crc7
- TITLE:=Serial Peripheral Interface
- KCONFIG:=CONFIG_SPI=y \
- CONFIG_MTD_DATAFLASH=n \
- CONFIG_MTD_M25P80=n \
- CONFIG_SPI_AT25=n \
- CONFIG_SPI_SPIDEV=n \
- CONFIG_SPI_TLE62X0=n
+ TITLE:=Generic register map support
+ KCONFIG:=CONFIG_REGMAP=y \
+ CONFIG_REGMAP_SPI \
+ CONFIG_REGMAP_I2C
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
+ $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
+ AUTOLOAD:=$(call AutoLoad,10,regmap-i2c regmap-spi)
endef
-define KernelPackage/spi/description
- This package contains the Serial Peripheral Interface driver
+define KernelPackage/regmap/description
+ Generic register map support
endef
-$(eval $(call KernelPackage,spi))
+$(eval $(call KernelPackage,regmap))
-define KernelPackage/spi-bitbang
+define KernelPackage/ikconfig
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@LINUX_2_6
- TITLE:=Serial Peripheral Interface bitbanging
- KCONFIG:=CONFIG_SPI_BITBANG=y
+ TITLE:=Kernel configuration via /proc/config.gz
+ KCONFIG:=CONFIG_IKCONFIG \
+ CONFIG_IKCONFIG_PROC=y
+ FILES:=$(LINUX_DIR)/kernel/configs.ko
+ AUTOLOAD:=$(call AutoLoad,70,configs)
endef
-define KernelPackage/spi-bitbang/description
- This package contains the Serial Peripheral Interface bitbanging library
+define KernelPackage/ikconfig/description
+ Kernel configuration via /proc/config.gz
endef
-$(eval $(call KernelPackage,spi-bitbang))
+$(eval $(call KernelPackage,ikconfig))
projects / openwrt / svn-archive / archive.git / blobdiff