#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
$(eval $(call KernelPackage,crc-itu-t))
+define KernelPackage/crc-ccitt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC-CCITT support
+ KCONFIG:=CONFIG_CRC_CCITT
+ FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+endef
+
+define KernelPackage/crc-ccitt/description
+ Kernel module for CRC-CCITT support
+endef
+
+$(eval $(call KernelPackage,crc-ccitt))
+
+
+define KernelPackage/crc7
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
+endef
+
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,crc7))
+
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
DEPENDS:=kmod-pcmcia-core
KCONFIG:= \
CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
$(eval $(call KernelPackage,pcmcia-serial))
-# XXX: remove @!TARGET_* later when we have USB support properly detected on all targets
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT @!TARGET_atheros @!TARGET_uml
+ DEPENDS:=@USB_SUPPORT
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@TARGET_at91
+ DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
- CONFIG_MMC_AT91
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
# XXX: added a workaround for watchdog path changes
ifeq ($(KERNEL),2.4)
WATCHDOG_DIR=char
endif
-ifeq ($(KERNEL_PATCHVER),2.6.24)
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
WATCHDOG_DIR=watchdog
endif
WATCHDOG_DIR?=char/watchdog
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
$(eval $(call KernelPackage,softdog))
-# XXX: remove @TARGET_* later when we are able to detect the exact version of the kernel
define KernelPackage/leds-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO LED support
- DEPENDS:=@TARGET_adm5120
+ DEPENDS:= @GPIO_SUPPORT
KCONFIG:=CONFIG_LEDS_GPIO
FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
$(eval $(call KernelPackage,leds-gpio))
-define KernelPackage/leds-adm5120
- SUBMENU:=$(OTHER_MENU)
- TITLE:=ADM5120 LED support
- DEPENDS:=@TARGET_adm5120 +kmod-leds-gpio
- KCONFIG:=CONFIG_LEDS_ADM5120
- FILES:=$(LINUX_DIR)/drivers/leds/leds-adm5120.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,59,leds-adm5120)
-endef
-
-define KernelPackage/leds-adm5120/description
- Kernel module for LEDs on ADM5120 based boards.
-endef
-
-$(eval $(call KernelPackage,leds-adm5120))
-
-
define KernelPackage/ledtrig-adm5120-switch
SUBMENU:=$(OTHER_MENU)
TITLE:=LED ADM5120 Switch Port Status Trigger
$(eval $(call KernelPackage,ledtrig-morse))
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
define KernelPackage/nsc-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
TITLE:=Natsemi SCX200 Watchdog support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
endef
$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input even device
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ DEPENDS:=+kmod-input-core @LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+
+define KernelPackage/mmc-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD over SPI Support
+ DEPENDS:=@LINUX_2_6 +kmod-mmc +kmod-crc-itu-t +kmod-crc7
+ KCONFIG:=CONFIG_MMC_SPI \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
+endef
+
+define KernelPackage/mmc-spi/description
+ Kernel support for MMC/SD over SPI
+endef
+
+$(eval $(call KernelPackage,mmc-spi))
+
+define KernelPackage/mmc-atmelmci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
+endef
+
+$(eval $(call KernelPackage,mmc-atmelmci))
+
+define KernelPackage/spi-bitbang
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Serial Peripheral Interface bitbanging library
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_BITBANG \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_bitbang.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spi_bitbang)
+endef
+
+define KernelPackage/spi-bitbang/description
+ This package contains the SPI bitbanging library
+endef
+
+$(eval $(call KernelPackage,spi-bitbang))
+
+define KernelPackage/spi-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO based bitbanging SPI controller
+ DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_GPIO
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,spi_gpio)
+endef
+
+define KernelPackage/spi-gpio/description
+ This package contains the GPIO based bitbanging SPI controller driver
+endef
+
+$(eval $(call KernelPackage,spi-gpio))
+
+define KernelPackage/spi-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=User mode SPI device driver
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_SPIDEV \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spidev)
+endef
+
+define KernelPackage/spi-dev/description
+ This package contains the user mode SPI device driver
+endef
+
+$(eval $(call KernelPackage,spi-dev))
+
+define KernelPackage/crypto-dev-ixp4xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=IXP4xx crypto driver
+ DEPENDS:=\
+ @TARGET_ixp4xx +kmod-crypto-core +kmod-crypto-des +kmod-crypto-aead \
+ +kmod-crypto-authenc
+ KCONFIG:=\
+ CONFIG_CRYPTO_HW=y \
+ CONFIG_CRYPTO_DEV_IXP4XX
+ FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
+endef
+
+define KernelPackage/crypto-dev-ixp4xx/description
+ Kernel support for the IXP4xx HW crypto engine.
+endef
+
+$(eval $(call KernelPackage,crypto-dev-ixp4xx))
projects / openwrt / svn-archive / archive.git / blobdiff