mac80211: broadcast the country IE by default if the country code is configured ...
[openwrt/svn-archive/archive.git] / package / mac80211 / files / lib / wifi / mac80211.sh
index dd77f79..2ca63bb 100644 (file)
@@ -6,10 +6,16 @@ mac80211_hostapd_setup_base() {
        local ifname="$2"
 
        cfgfile="/var/run/hostapd-$phy.conf"
+       macfile="/var/run/hostapd-$phy.maclist"
+       [ -e "$macfile" ] && rm -f "$macfile"
+
        config_get device "$vif" device
        config_get country "$device" country
        config_get hwmode "$device" hwmode
        config_get channel "$device" channel
+       config_get beacon_int "$device" beacon_int
+       config_get basic_rate_list "$device" basic_rate
+       config_get_bool noscan "$device" noscan
        [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
        [ "$channel" = auto ] && channel=
        [ -n "$hwmode" ] && {
@@ -29,7 +35,40 @@ mac80211_hostapd_setup_base() {
                        [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
                }
        }
-       cat > "$cfgfile" <<EOF
+
+       local country_ie=0
+       [ -n "$country" ] && country_ie=1
+       config_get_bool country_ie "$device" country_ie "$country_ie"
+       [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
+
+       config_get macfilter "$vif" macfilter
+       case "$macfilter" in
+               allow)
+                       append base_cfg "macaddr_acl=1" "$N"
+                       append base_cfg "accept_mac_file=$macfile" "$N"
+                       ;;
+               deny)
+                       append base_cfg "macaddr_acl=0" "$N"
+                       append base_cfg "deny_mac_file=$macfile" "$N"
+                       ;;
+       esac
+       config_get maclist "$vif" maclist
+       [ -n "$maclist" ] && {
+               for mac in $maclist; do
+                       echo "$mac" >> $macfile
+               done
+       }
+
+       local br brval brstr
+       [ -n "$basic_rate_list" ] && {
+               for br in $basic_rate_list; do
+                       brval="$(($br / 100))"
+                       [ -n "$brstr" ] && brstr="$brstr "
+                       brstr="$brstr$brval"
+               done
+       }
+       
+       cat >> "$cfgfile" <<EOF
 ctrl_interface=/var/run/hostapd-$phy
 driver=nl80211
 wmm_ac_bk_cwmin=4
@@ -70,7 +109,10 @@ tx_queue_data0_cwmax=7
 tx_queue_data0_burst=1.5
 ${hwmode:+hw_mode=$hwmode}
 ${channel:+channel=$channel}
+${beacon_int:+beacon_int=$beacon_int}
 ${country:+country_code=$country}
+${noscan:+noscan=$noscan}
+${brstr:+basic_rates=$brstr}
 $base_cfg
 
 EOF
@@ -101,13 +143,21 @@ mac80211_hostapd_setup_bss() {
        config_get_bool wds "$vif" wds 0
        [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
 
+       local macaddr hidden maxassoc wmm
        config_get macaddr "$vif" macaddr
+       config_get maxassoc "$vif" maxassoc
+       config_get dtim_period "$vif" dtim_period
+       config_get max_listen_int "$vif" max_listen_int
        config_get_bool hidden "$vif" hidden 0
+       config_get_bool wmm "$vif" wmm 1
        cat >> /var/run/hostapd-$phy.conf <<EOF
 $hostapd_cfg
-wmm_enabled=1
+wmm_enabled=$wmm
 bssid=$macaddr
 ignore_broadcast_ssid=$hidden
+${dtim_period:+dtim_period=$dtim_period}
+${max_listen_int:+max_listen_interval=$max_listen_int}
+${maxassoc:+max_num_sta=$maxassoc}
 EOF
 }
 
@@ -163,6 +213,14 @@ scan_mac80211() {
        config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
 }
 
+list_phy_interfaces() {
+       local phy="$1"
+       if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+               ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+       else
+               ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+       fi
+}
 
 disable_mac80211() (
        local device="$1"
@@ -179,7 +237,7 @@ disable_mac80211() (
        done
 
        include /lib/network
-       for wdev in $(ls /sys/class/ieee80211/${phy}/device/net 2>/dev/null); do
+       for wdev in $(list_phy_interfaces "$phy"); do
                [ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
                for pid in `pidof wpa_supplicant`; do
                        grep "$wdev" /proc/$pid/cmdline >/dev/null && \
@@ -204,19 +262,28 @@ enable_mac80211() {
        config_get txpower "$device" txpower
        config_get country "$device" country
        config_get distance "$device" distance
+       config_get txantenna "$device" txantenna all
+       config_get rxantenna "$device" rxantenna all
+       config_get frag "$device" frag
+       config_get rts "$device" rts
        find_mac80211_phy "$device" || return 0
        config_get phy "$device" phy
        local i=0
        local macidx=0
        local apidx=0
        fixed=""
+       local hostapd_ctrl=""
 
        [ -n "$country" ] && iw reg set "$country"
        [ "$channel" = "auto" -o "$channel" = "0" ] || {
                fixed=1
        }
 
+       iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
+
        [ -n "$distance" ] && iw phy "$phy" set distance "$distance"
+       [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
+       [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
 
        export channel fixed
        # convert channel to frequency
@@ -302,22 +369,11 @@ enable_mac80211() {
                        [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
                fi
 
-               # txpower is not yet implemented in iw
                config_get vif_txpower "$vif" txpower
                # use vif_txpower (from wifi-iface) to override txpower (from
                # wifi-device) if the latter doesn't exist
                txpower="${txpower:-$vif_txpower}"
-               [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
-
-               config_get frag "$vif" frag
-               if [ -n "$frag" ]; then
-                       iw phy "$phy" set frag "${frag%%.*}"
-               fi
-
-               config_get rts "$vif" rts
-               if [ -n "$rts" ]; then
-                       iw phy "$phy" set rts "${rts%%.*}"
-               fi
+               [ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"
        done
 
        local start_hostapd=
@@ -340,6 +396,7 @@ enable_mac80211() {
                        config_get mode "$vif" mode
                        config_get ifname "$vif" ifname
                        [ "$mode" = "ap" ] || continue
+                       hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
                        mac80211_start_vif "$vif" "$ifname"
                done
        }
@@ -351,17 +408,65 @@ enable_mac80211() {
                ifconfig "$ifname" up
 
                if [ ! "$mode" = "ap" ]; then
-                       mac80211_start_vif "$vif" "$ifname"
-
+                       ifconfig "$ifname" up
                        case "$mode" in
                                adhoc)
                                        config_get bssid "$vif" bssid
                                        config_get ssid "$vif" ssid
-                                       iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
+                                       config_get beacon_int "$device" beacon_int
+                                       config_get basic_rate_list "$device" basic_rate
+                                       config_get encryption "$vif" encryption
+                                       config_get key "$vif" key 1
+                                       config_get mcast_rate "$vif" mcast_rate
+
+                                       local keyspec=""
+                                       [ "$encryption" == "wep" ] && {
+                                               case "$key" in
+                                                       [1234])
+                                                               local idx
+                                                               for idx in 1 2 3 4; do
+                                                                       local ikey
+                                                                       config_get ikey "$vif" "key$idx"
+
+                                                                       [ -n "$ikey" ] && {
+                                                                               ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
+                                                                               [ $idx -eq $key ] && ikey="d:$ikey"
+                                                                               append keyspec "$ikey"
+                                                                       }
+                                                               done
+                                                       ;;
+                                                       *) append keyspec "d:0:$(prepare_key_wep "$key")" ;;
+                                               esac
+                                       }
+
+                                       local br brval brsub brstr
+                                       [ -n "$basic_rate_list" ] && {
+                                               for br in $basic_rate_list; do
+                                                       brval="$(($br / 1000))"
+                                                       brsub="$((($br / 100) % 10))"
+                                                       [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
+                                                       [ -n "$brstr" ] && brstr="$brstr,"
+                                                       brstr="$brstr$brval"
+                                               done
+                                       }
+
+                                       local mcval=""
+                                       [ -n "$mcast_rate" ] && {
+                                               mcval="$(($mcast_rate / 1000))"
+                                               mcsub="$(( ($mcast_rate / 100) % 10 ))"
+                                               [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
+                                       }
+
+                                       iw dev "$ifname" ibss join "$ssid" $freq \
+                                               ${fixed:+fixed-freq} $bssid \
+                                               ${beacon_int:+beacon-interval $beacon_int} \
+                                               ${brstr:+basic-rates $brstr} \
+                                               ${mcval:+mcast-rate $mcval} \
+                                               ${keyspec:+keys $keyspec}
                                ;;
                                sta)
                                        if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
-                                               wpa_supplicant_setup_vif "$vif" wext || {
+                                               wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
                                                        echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
                                                        # make sure this wifi interface won't accidentally stay open without encryption
                                                        ifconfig "$ifname" down
@@ -370,13 +475,14 @@ enable_mac80211() {
                                        fi
                                ;;
                        esac
+                       mac80211_start_vif "$vif" "$ifname"
                fi
        done
 
 }
 
 
-check_device() {
+check_mac80211_device() {
        config_get phy "$1" phy
        [ -z "$phy" ] && {
                find_mac80211_phy "$1" >/dev/null || return 0
@@ -395,12 +501,12 @@ detect_mac80211() {
        done
        for dev in $(ls /sys/class/ieee80211); do
                found=0
-               config_foreach check_device wifi-device
+               config_foreach check_mac80211_device wifi-device
                [ "$found" -gt 0 ] && continue
 
                mode_11n=""
                mode_band="g"
-               channel="5"
+               channel="11"
                ht_cap=0
                for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
                        ht_cap="$(($ht_cap | $cap))"
@@ -412,8 +518,13 @@ detect_mac80211() {
 
                        list="  list ht_capab"
                        [ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list  LDPC" "$N"
+                       [ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list        GF" "$N"
                        [ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list        SHORT-GI-20" "$N"
                        [ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list        SHORT-GI-40" "$N"
+                       [ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list      TX-STBC" "$N"
+                       [ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list      RX-STBC1" "$N"
+                       [ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list      RX-STBC12" "$N"
+                       [ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list      RX-STBC123" "$N"
                        [ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list    DSSS_CCK-40" "$N"
                }
                iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }