config_get country "$device" country
config_get hwmode "$device" hwmode
config_get channel "$device" channel
+ config_get_bool noscan "$device" noscan
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
[ "$channel" = auto ] && channel=
[ -n "$hwmode" ] && {
${hwmode:+hw_mode=$hwmode}
${channel:+channel=$channel}
${country:+country_code=$country}
+${noscan:+noscan=$noscan}
$base_cfg
EOF
}
config_set "$vif" ifname "$ifname"
- config_get enc "$vif" encryption
config_get mode "$vif" mode
config_get ssid "$vif" ssid
[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
config_set "$vif" macaddr "$vif_mac"
- # Valid values are:
- # wpa / wep / none
- #
# !! ap !!
#
# ALL ap functionality will be passed to hostapd
#
- # !! mesh / adhoc / station !!
- # none -> NO encryption
+ # !! station !!
#
- # wep + keymgmt = '' -> we use iw to connect to the
- # network.
+ # ALL station functionality will be passed to wpa_supplicant
#
- # wep + keymgmt = 'NONE' -> wpa_supplicant will be
- # configured to handle the wep connection
if [ ! "$mode" = "ap" ]; then
# We attempt to set the channel for all interfaces, although
# mac80211 may not support it or the driver might not yet
# for ap mode this is handled by hostapd
[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
-
- local key keystring
-
- case "$enc" in
- *none*)
- config_get keymgmt "$vif" keymgmt
- ;;
- *wep*)
- config_get keymgmt "$vif" keymgmt
- if [ -z "$keymgmt" ]; then
- config_get key "$vif" key
- key="${key:-1}"
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- config_get ckey "$vif" "key${idx}"
- if [ -n "$ckey" ]; then
- [ $idx -eq $key ] && zidx="d:${zidx}"
- append keystring "${zidx}:$(prepare_key_wep "$ckey")"
- fi
- done
- ;;
- *)
- keystring="d:0:$(prepare_key_wep "$key")"
- ;;
- esac
- fi
- ;;
- *psk*|*wpa*)
- config_get key "$vif" key
- ;;
- esac
fi
# txpower is not yet implemented in iw
if [ -n "$rts" ]; then
iw phy "$phy" set rts "${rts%%.*}"
fi
-
- ifconfig "$ifname" up
-
- [ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
-
- case "$mode" in
- adhoc)
- config_get bssid "$vif" bssid
- iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
- ;;
- sta|mesh)
- config_get bssid "$vif" bssid
- case "$enc" in
- *wep*)
- if [ -z "$keymgmt" ]; then
- [ -n "$keystring" ] &&
- iw dev "$ifname" connect "$ssid" ${fixed:+$freq} $bssid key $keystring
- else
- if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" wext || {
- echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- continue
- }
- fi
- fi
- ;;
- *wpa*|*psk*)
- config_get key "$vif" key
- if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" wext || {
- echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- continue
- }
- fi
- ;;
- *)
- if [ -z "$keymgmt" ]; then
- iw dev "$ifname" connect "$ssid" ${fixed:+$freq} $bssid
- else
- if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" wext || {
- echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- continue
- }
- fi
- fi
- ;;
- esac
-
- ;;
- esac
done
local start_hostapd=
start_hostapd=1
done
- [ -n "$start_hostapd" ] || return 0
+ [ -n "$start_hostapd" ] && {
+ hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
+ echo "Failed to start hostapd for $phy"
+ return
+ }
+ sleep 2
- hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
- echo "Failed to start hostapd for $phy"
- return
+ for vif in $vifs; do
+ config_get mode "$vif" mode
+ config_get ifname "$vif" ifname
+ [ "$mode" = "ap" ] || continue
+ mac80211_start_vif "$vif" "$ifname"
+ done
}
- sleep 2
for vif in $vifs; do
config_get mode "$vif" mode
config_get ifname "$vif" ifname
- [ "$mode" = "ap" ] || continue
- mac80211_start_vif "$vif" "$ifname"
+ [ ! "$mode" = "ap" ] || continue
+ ifconfig "$ifname" up
+
+ if [ ! "$mode" = "ap" ]; then
+ ifconfig "$ifname" up
+ case "$mode" in
+ adhoc)
+ config_get bssid "$vif" bssid
+ config_get ssid "$vif" ssid
+ iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
+ ;;
+ sta)
+ if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+ wpa_supplicant_setup_vif "$vif" wext || {
+ echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
+ # make sure this wifi interface won't accidentally stay open without encryption
+ ifconfig "$ifname" down
+ continue
+ }
+ fi
+ ;;
+ esac
+ mac80211_start_vif "$vif" "$ifname"
+ fi
done
+
}
[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC" "$N"
[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list SHORT-GI-20" "$N"
[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list SHORT-GI-40" "$N"
+ [ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list TX-STBC" "$N"
+ [ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list RX-STBC1" "$N"
+ [ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list RX-STBC12" "$N"
+ [ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list RX-STBC123" "$N"
[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list DSSS_CCK-40" "$N"
}
iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }
projects / openwrt / svn-archive / archive.git / blobdiff