-From 22592b5df5bef2754f56e165ee0828777a95fdfd Mon Sep 17 00:00:00 2001
+From e380f1fa260d81cba1ebb1b6c333ef8c31f2a8c5 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 10 Jan 2009 11:05:41 +0100
+Date: Fri, 23 Jan 2009 17:16:11 +0100
Subject: [PATCH] rt2x00: Implement support for rt2800usb
Add support for the rt2800usb chipset.
---
drivers/net/wireless/rt2x00/Kconfig | 14 +
drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2800usb.c | 2540 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800usb.h | 1892 +++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h | 1 +
- 5 files changed, 4448 insertions(+), 0 deletions(-)
+ drivers/net/wireless/rt2x00/rt2800usb.c | 2905 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800usb.h | 1944 +++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00.h | 7 +
+ 5 files changed, 4871 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
+obj-$(CONFIG_RT2800USB) += rt2800usb.o
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -0,0 +1,2540 @@
+@@ -0,0 +1,2905 @@
+/*
-+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
++static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u8 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, u8 *value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
++
++ WAIT_FOR_RFCSR(rt2x00dev, ®);
++ }
++
++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD,
-+ !(filter_flags & FIF_OTHER_BSS));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
+ */
+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) {
+ case 1:
++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+ break;
+ case 2:
++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 16);
++ break;
+ case 3:
+ /* Do nothing */
+ break;
+ rt2x00dev->lna_gain = lna_gain;
+}
+
-+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
++static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
+{
-+ u32 reg;
-+ unsigned int tx_pin;
+ u16 eeprom;
+
-+ tx_pin = 0;
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-+
+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+ /*
+ * Determine antenna settings from EEPROM
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-+ /* Turn off unused PA or LNA when only 1T or 1R */
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
-+ }
+
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+ /* Turn off unused PA or LNA when only 1T or 1R */
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
+ } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+ TXPOWER_A_TO_DEV(info->tx_power2));
-+
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
+ } else {
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power2));
-+
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ }
+
+ rt2x00_set_field32(&rf->rf4, RF4_BW40,
+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++ TXPOWER_G_TO_DEV(info->tx_power1));
++ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40);
++ else
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u32 reg;
++ unsigned int tx_pin;
++ u16 eeprom;
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ rt2800usb_config_channel_rt2x(rt2x00dev, rf, info);
++ else
++ rt2800usb_config_channel_rt3x(rt2x00dev, rf, info);
++
++ tx_pin = 0;
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++ /* Turn off unused PA or LNA when only 1T or 1R */
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0);
++ }
++
++ /* Turn off unused PA or LNA when only 1T or 1R */
++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0);
++ }
++
++ if (rf->channel > 14)
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
++ else
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+
+ /*
+ * Change BBP settings
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
++static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf)
++{
++ enum dev_state state =
++ (libconf->conf->flags & IEEE80211_CONF_PS) ?
++ STATE_SLEEP : STATE_AWAKE;
++ u32 reg;
++
++ if (state == STATE_SLEEP) {
++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
++
++ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
++ libconf->conf->listen_interval - 1);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
++
++ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
++ } else {
++ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
++
++ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
++ }
++}
++
+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf,
+ const unsigned int flags)
+ rt2800usb_config_retry_limit(rt2x00dev, libconf);
+ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
+ rt2800usb_config_duration(rt2x00dev, libconf);
++ if (flags & IEEE80211_CONF_CHANGE_PS)
++ rt2800usb_config_ps(rt2x00dev, libconf);
+}
+
+/*
+
+static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
-+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
-+ return 0x2e + rt2x00dev->lna_gain;
++ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
++ return 0x1c + (2 * rt2x00dev->lna_gain);
++ else
++ return 0x2e + rt2x00dev->lna_gain;
++ }
+
+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual, const u32 count)
+{
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C)
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ return;
+
+ /*
+ unsigned int i;
+ int status;
+ u32 reg;
++ u32 offset;
++ u32 length;
++ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
++
++ /*
++ * Firmware files:
++ * There are 2 variations of the rt2870 firmware.
++ * a) size: 4kb
++ * b) size: 8kb
++ * Note that (b) contains 2 seperate firmware blobs of 4k
++ * within the file. The first blob is the same firmware as (a),
++ * but the second blob is for the additional chipsets.
++ */
++ if (len != 4096 && len != 8192) {
++ ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len);
++ return -ENOENT;
++ }
++
++ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) {
++ offset = 0;
++ length = 4096;
++ } else if (len == 8192) {
++ offset = 4096;
++ length = 4096;
++ } else {
++ ERROR(rt2x00dev,
++ "Current firmware does not support detected chipset %04x.\n",
++ chipset);
++ ERROR(rt2x00dev,
++ "Please upgrade to a more recent firmware version.\n");
++ return -ENOENT;
++ }
+
+ /*
+ * Wait for stable hardware.
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ FIRMWARE_IMAGE_BASE,
-+ data, len,
-+ REGISTER_TIMEOUT32(len));
++ data + offset, length,
++ REGISTER_TIMEOUT32(length));
+
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
++ } else {
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++ }
+
+ rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®);
+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+
+ rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®);
+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
++ else
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
+ rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+ * ASIC will keep garbage value after boot, clear encryption keys.
+ */
+ for (i = 0; i < 254; i++) {
-+ u32 wcid[2] = { 0xffffffff, 0x0000ffff };
++ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+ wcid, sizeof(wcid));
+ }
+ rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
+ rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
++ rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) {
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+ }
+
-+ if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D)
-+ rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
++ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
++ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
++ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
++ }
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+ return 0;
+}
+
++static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++ bool bw40, u8 rfcsr24, u8 filter_target)
++{
++ unsigned int i;
++ u8 bbp;
++ u8 rfcsr;
++ u8 passband;
++ u8 stopband;
++ u8 overtuned = 0;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++ if (bw40) {
++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10);
++ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++ }
++
++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * Set power & frequency of passband test tone
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++ for (i = 0; i < 100; i++) {
++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800usb_bbp_read(rt2x00dev, 55, &passband);
++ if (passband)
++ break;
++ }
++
++ /*
++ * Set power & frequency of stopband test tone
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
++
++ for (i = 0; i < 100; i++) {
++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
++
++ if ((passband - stopband) <= filter_target) {
++ rfcsr24++;
++ overtuned += ((passband - stopband) == filter_target);
++ } else
++ break;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ }
++
++ rfcsr24 -= !!overtuned;
++
++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ return rfcsr24;
++}
++
++static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++ u8 bbp;
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ return 0;
++
++ /*
++ * Init RF calibration.
++ */
++ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
++ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
++ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
++ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
++ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
++ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
++ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
++ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
++ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
++ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
++ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
++ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
++ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
++ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
++ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
++ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
++ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
++ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
++ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
++ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
++
++ /*
++ * Set RX Filter calibration for 20MHz and 40MHz
++ */
++ rt2x00dev->calibration_bw20 =
++ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++ rt2x00dev->calibration_bw40 =
++ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++ /*
++ * Set back to initial state
++ */
++ rt2800usb_bbp_write(rt2x00dev, 24, 0);
++
++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * set BBP back to BW20
++ */
++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
++
++ return 0;
++}
++
+/*
+ * Device state switch handlers.
+ */
+ */
+ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+ rt2800usb_init_registers(rt2x00dev) ||
-+ rt2800usb_init_bbp(rt2x00dev)))
++ rt2800usb_init_bbp(rt2x00dev) ||
++ rt2800usb_init_rfcsr(rt2x00dev)))
+ return -EIO;
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
+ struct txentry_desc *txdesc)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-+ __le32 *txd = skbdesc->desc;
-+ __le32 *txwi = txd + TXD_DESC_SIZE;
++ __le32 *txi = skbdesc->desc;
++ __le32 *txwi = txi + TXINFO_DESC_SIZE;
+ u32 word;
+
+ /*
+ /*
+ * Initialize TX descriptor
+ */
-+ rt2x00_desc_read(txd, 0, &word);
-+ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
-+ rt2x00_desc_write(txd, 0, word);
-+
-+ rt2x00_desc_read(txd, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1);
-+ rt2x00_set_field32(&word, TXD_W1_BURST,
++ rt2x00_desc_read(txi, 0, &word);
++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
++ roundup(skb->len + TXWI_DESC_SIZE, 4));
++ rt2x00_set_field32(&word, TXINFO_W0_WIV, 1);
++ rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
++ rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
-+ rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0,
-+ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(txd, 1, word);
-+
-+ rt2x00_desc_read(txd, 2, &word);
-+ rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
-+ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_desc_write(txd, 2, word);
-+
-+ rt2x00_desc_read(txd, 3, &word);
-+ rt2x00_set_field32(&word, TXD_W3_WIV, 1);
-+ rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
-+ rt2x00_desc_write(txd, 3, word);
++ rt2x00_desc_write(txi, 0, word);
+}
+
+/*
+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+ /*
-+ * Remove TXWI descriptor from start of buffer.
++ * Remove RXWI descriptor from start of buffer.
+ */
-+ skb_pull(entry->skb, TXWI_DESC_SIZE + skbdesc->desc_len);
++ skb_pull(entry->skb, RXWI_DESC_SIZE + skbdesc->desc_len);
+ skb_trim(entry->skb, rxdesc->size);
+}
+
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
-+ if (word != 0) {
-+ /* NIC configuration must always be 0. */
-+ word = 0;
++ if (word == 0xffff) {
++ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+ }
+static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
-+ u16 rev;
+ u16 value;
+ u16 eeprom;
+
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
-+ rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
-+ rt2x00_set_chip(rt2x00dev, RT2870, value, rev);
++ rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+
+ /*
+ * The check for rt2860 is not a typo, some rt2870 hardware
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
++/*
++ * RF value list for rt3070
++ * Supports: 2.4 GHz
++ */
++static const struct rf_channel rf_vals_3070[] = {
++ {1, 241, 2, 2 },
++ {2, 241, 2, 7 },
++ {3, 242, 2, 2 },
++ {4, 242, 2, 7 },
++ {5, 243, 2, 2 },
++ {6, 243, 2, 7 },
++ {7, 244, 2, 2 },
++ {8, 244, 2, 7 },
++ {9, 245, 2, 2 },
++ {10, 245, 2, 7 },
++ {11, 246, 2, 2 },
++ {12, 246, 2, 7 },
++ {13, 247, 2, 2 },
++ {14, 248, 2, 4 },
++};
++
+static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ */
+ rt2x00dev->hw->flags =
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-+ IEEE80211_HW_SIGNAL_DBM;
-+ rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE + TXINFO_DESC_SIZE;
++ IEEE80211_HW_SIGNAL_DBM |
++ IEEE80211_HW_SUPPORTS_PS |
++ IEEE80211_HW_PS_NULLFUNC_STACK;
++ rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
+
+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals);
+ spec->channels = rf_vals;
++ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
++ rt2x00_rf(&rt2x00dev->chip, RF2020)) {
++ spec->num_channels = ARRAY_SIZE(rf_vals_3070);
++ spec->channels = rf_vals_3070;
+ }
+
+ /*
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ u32 reg;
++ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®);
+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
+ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+ return 0;
+ if (retval)
+ return retval;
+
++ /*
++ * We only need to perform additional register initialization
++ * for WMM queues/
++ */
++ if (queue_idx >= 4)
++ return 0;
++
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+ /* Update WMM TXOP register */
-+ if (queue_idx < 2) {
-+ field.bit_offset = queue_idx * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00usb_register_read(rt2x00dev, WMM_TXOP0_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->txop);
-+ rt2x00usb_register_write(rt2x00dev, WMM_TXOP0_CFG, reg);
-+ } else if (queue_idx < 4) {
-+ field.bit_offset = (queue_idx - 2) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00usb_register_read(rt2x00dev, WMM_TXOP1_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->txop);
-+ rt2x00usb_register_write(rt2x00dev, WMM_TXOP1_CFG, reg);
-+ }
++ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
++ field.bit_offset = (queue_idx & 1) * 16;
++ field.bit_mask = 0xffff << field.bit_offset;
++
++ rt2x00usb_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, field, queue->txop);
++ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+ /* Update EDCA registers */
-+ if (queue_idx < 4) {
-+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-+ }
++ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
++
++ rt2x00usb_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
++ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ return 0;
+}
+static const struct data_queue_desc rt2800usb_queue_tx = {
+ .entry_num = TX_ENTRIES,
+ .data_size = DATA_FRAME_SIZE,
-+ .desc_size = TXD_DESC_SIZE,
++ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_bcn = {
+ .entry_num = 8 * BEACON_ENTRIES,
+ .data_size = MGMT_FRAME_SIZE,
-+ .desc_size = TXWI_DESC_SIZE,
++ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+ * rt2800usb module information.
+ */
+static struct usb_device_id rt2800usb_device_table[] = {
++ /* Abocom */
++ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Amit */
+ { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* ASUS */
+ { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Belkin */
+ { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Conceptronic */
+ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* D-Link */
+ { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Edimax */
++ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Linksys */
+ { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Logitec */
++ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Planex */
+ { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Ralink */
+ { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Samsung */
++ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Siemens */
+ { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Sitecom */
+ /* ZCOM */
+ { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
++ /* Zinwell */
++ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
++ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Zyxel */
+ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { 0, }
+module_exit(rt2800usb_exit);
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
-@@ -0,0 +1,1892 @@
+@@ -0,0 +1,1944 @@
+/*
-+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+/*
+ * RT2870 version
+ */
-+#define RT2870_VERSION_C 0x0100
-+#define RT2870_VERSION_D 0x0101
-+#define RT2870_VERSION_E 0x0200
++#define RT2860C_VERSION 0x28600100
++#define RT2860D_VERSION 0x28600101
++#define RT2880E_VERSION 0x28720200
++#define RT2883_VERSION 0x28830300
++#define RT3070_VERSION 0x30700200
+
+/*
+ * Signal information.
+#define PBF_DBG 0x043c
+
+/*
++ * RF registers
++ */
++#define RF_CSR_CFG 0x0500
++#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
++
++/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG 0x1300
-+#define EDCA_AC0_CFG_AC_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG 0x1304
-+#define EDCA_AC1_CFG_AC_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG 0x1308
-+#define EDCA_AC2_CFG_AC_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG 0x130c
-+#define EDCA_AC3_CFG_AC_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
+#define BBP3_RX_ANTENNA FIELD8(0x18)
+
+/*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_BANDWIDTH FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
++
++/*
+ * RF registers
+ */
+
+#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff)
+#define TXINFO_W0_WIV FIELD32(0x01000000)
+#define TXINFO_W0_QSEL FIELD32(0x06000000)
++#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000)
+#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000)
+#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000)
+
u16 rf;
u32 rev;
+@@ -778,6 +779,12 @@ struct rt2x00_dev {
+ u8 freq_offset;
+
+ /*
++ * Calibration information (for rt2800usb).
++ */
++ u8 calibration_bw20;
++ u8 calibration_bw40;
++
++ /*
+ * Low level statistics which will have
+ * to be kept up to date while device is running.
+ */
projects / openwrt / svn-archive / archive.git / blobdiff