This patch adds a number of configuration options to the MadWifi package. You can
[openwrt/svn-archive/archive.git] / package / madwifi / Makefile
index 7657f8d2ee478569324f925ecbea272d346615d7..ef83702a8aee12c3fe5a92cbdda966d63d8a2e19 100644 (file)
@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,53 +10,143 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=0.9.2.1
+PKG_REV:=3314
+PKG_VERSION:=r$(PKG_REV)
+# PKG_BRANCH:=madwifi-dfs
 PKG_RELEASE:=1
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_MD5SUM:=bf5509fccd3852e22551826063b1b61e
-PKG_CAT:=bzcat
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-RATE_CONTROL:=sample
+ifdef CONFIG_MADWIFI_BUS_DEFAULT
+  ifneq ($(CONFIG_TARGET_atheros),)
+    BUS:=AHB
+  else
+    ifneq ($(CONFIG_PCI_SUPPORT),)
+      BUS:=PCI
+    endif
+  endif
 
-ifeq ($(ARCH),mips)
-  HAL_TARGET:=mips-be-elf
+  # XXX: remove this check later when we have PCI support properly detected on all targets
+  ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+    BUS:=
+  endif
+else
+  ifdef CONFIG_MADWIFI_BUS_PCI
+    BUS:=PCI
+  else
+    ifdef CONFIG_MADWIFI_BUS_AHB
+      BUS:=AHB
+    endif
+  endif
 endif
-ifeq ($(ARCH),mipsel)
-  HAL_TARGET:=mips-le-elf
-endif
-ifeq ($(ARCH),i386)
-  HAL_TARGET:=i386-elf
-endif
-ifeq ($(ARCH),armeb)
-  HAL_TARGET:=xscale-be-elf
-endif
-ifeq ($(ARCH),powerpc)
-  HAL_TARGET:=powerpc-be-elf
+
+ifdef CONFIG_MADWIFI_HAL_DEFAULT
+  ifeq ($(ARCH),mips)
+    HAL_TARGET:=mips-be-elf
+  endif
+  ifeq ($(ARCH),mipsel)
+    HAL_TARGET:=mips-le-elf
+  endif
+  ifeq ($(ARCH),i386)
+    HAL_TARGET:=i386-elf
+  endif
+  ifeq ($(ARCH),i686)
+    HAL_TARGET:=i386-elf
+  endif
+  ifeq ($(BOARD),ixp4xx)
+    HAL_TARGET:=xscale-be-elf
+  endif
+  ifeq ($(BOARD),iop32x)
+    HAL_TARGET:=xscale-le-elf
+  endif
+  ifeq ($(ARCH),powerpc)
+    HAL_TARGET:=powerpc-be-elf
+  endif
+  ifeq ($(BOARD),storm)
+    HAL_TARGET:=armv4-le-elf
+  endif
+  ifneq ($(CONFIG_TARGET_atheros),)
+    HAL_TARGET:=ap51
+  endif
+else
+  ifdef CONFIG_MADWIFI_HAL_MIPS_BE_ELF
+    HAL_TARGET:=mips-be-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_MIPS_LE_ELF
+    HAL_TARGET:=mips-le-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_I386_ELF
+    HAL_TARGET:=i386-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_XSCALE_BE_ELF
+    HAL_TARGET:=xscale-be-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_XSCALE_LE_ELF
+    HAL_TARGET:=xscale-le-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_ARMV4_LE_ELF
+    HAL_TARGET:=armv4-le-elf
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_AP30
+    HAL_TARGET:=ap30
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_AP43
+    HAL_TARGET:=ap43
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_AP51
+    HAL_TARGET:=ap51
+  endif
+
+  ifdef CONFIG_MADWIFI_HAL_AP61
+    HAL_TARGET:=ap61
+  endif
+
 endif
 
-BUS:=PCI
-ifneq ($(CONFIG_LINUX_2_6_AR531X),)
-  BUS:=AHB
-  HAL_TARGET:=ap51
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+  RATE_CONTROL:=minstrel
 endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS:=PCI AHB # no suitable HAL for AHB yet.
+
+ifdef CONFIG_MADWIFI_RCA_ONOE
+  RATE_CONTROL:=onoe
 endif
 
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ifdef CONFIG_MADWIFI_RCA_AMRR
+  RATE_CONTROL:=amrr
 endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+  RATE_CONTROL:=sample
 endif
 
+MADWIFI_FILES:= \
+       $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
 MADWIFI_AUTOLOAD:= \
        wlan \
        wlan_scan_ap \
@@ -67,52 +157,83 @@ MADWIFI_AUTOLOAD:= \
        wlan_ccmp \
        wlan_tkip \
        wlan_wep \
-       wlan_xauth
+       wlan_xauth \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
-       MADWIFI_AUTOLOAD += ath_ahb
+  MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+  MADWIFI_AUTOLOAD+= ath_ahb
 endif
 ifeq ($(findstring PCI,$(BUS)),PCI)
-       MADWIFI_AUTOLOAD += ath_pci
+  MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+  MADWIFI_AUTOLOAD+= ath_pci
+endif
+
+MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
+ifdef CONFIG_MADWIFI_DEBUG
+  MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
 endif
 
+
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  DEPENDS:=+wireless-tools
-  DESCRIPTION:=\
-       This package contains a driver for Atheros 802.11a/b/g chipsets.
   URL:=http://madwifi.org/
-  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  FILES:= \
-               $(PKG_BUILD_DIR)/ath/ath_hal.$(LINUX_KMOD_SUFFIX) \
-               $(BUS_MODULES) \
-               $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
 
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-               PATH="$(TARGET_PATH)" \
-               ARCH="$(LINUX_KARCH)" \
-               CROSS_COMPILE="$(TARGET_CROSS)" \
-               TARGET="$(HAL_TARGET)" \
-               TOOLPREFIX="$(KERNEL_CROSS)" \
-               TOOLPATH="$(KERNEL_CROSS)" \
-               KERNELPATH="$(LINUX_DIR)" \
-               LDOPTS=" " \
-               ATH_RATE="ath_rate/$(RATE_CONTROL)" \
-               DOMULTI=1
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+endef
+
+define KernelPackage/madwifi/config
+       menu "MadWifi Configuration"
+               depends on PACKAGE_kmod-madwifi
+               source "$(SOURCE)/Config.in"
+       endmenu
+endef
+
+MAKE_ARGS:= \
+       PATH="$(TARGET_PATH)" \
+       ARCH="$(LINUX_KARCH)" \
+       CROSS_COMPILE="$(TARGET_CROSS)" \
+       TARGET="$(HAL_TARGET)" \
+       TOOLPREFIX="$(KERNEL_CROSS)" \
+       TOOLPATH="$(KERNEL_CROSS)" \
+       KERNELPATH="$(LINUX_DIR)" \
+       LDOPTS="--no-warn-mismatch " \
+       ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+       WARNINGS="-Wno-unused" \
+       $(ifndef CONFIG_MADWIFI_DEBUG,DEBUG="") \
+       DOMULTI=1
+
+MAKE_VARS:= \
+       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+
+HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
+ifneq ($(HALFILE),)
+  define Build/Prepare
+       $(call Build/Prepare/Default)
+       rm -rf $(PKG_BUILD_DIR)/tmp
+       mkdir -p $(PKG_BUILD_DIR)/tmp
+       tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+       $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
+       rm -rf $(PKG_BUILD_DIR)/tmp
+  endef
+endif
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
-       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" LDOPTS="--no-warn-mismatch" modules
+       $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+       $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
 ifeq ($(findstring PCI,$(BUS)),PCI)
   define Build/Compile/pci
-       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" LDOPTS="--no-warn-mismatch" modules
+       $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+       $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
@@ -123,28 +244,20 @@ endef
 define Build/Compile
        $(call Build/Compile/ahb)
        $(call Build/Compile/pci)
-       $(MAKE) $(MADWIFI_MAKEOPTS) \
-               CFLAGS="$(TARGET_CFLAGS)" \
-               tools
 endef
 
 define Build/InstallDev
-       mkdir -p $(STAGING_DIR)/usr/include/madwifi
-       $(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
-       mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
-       $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
-endef
-
-define Build/UninstallDev
-       rm -rf  $(STAGING_DIR)/usr/include/madwifi
+       mkdir -p $(1)/usr/include/madwifi
+       $(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+       mkdir -p $(1)/usr/include/madwifi/net80211
+       $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
 endef
 
 define KernelPackage/madwifi/install
-       mkdir -p $(1)/etc/init.d
-       mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
-       mkdir -p $(1)/usr/sbin
-       $(INSTALL_BIN) ./files/madwifi.init $(1)/etc/init.d/madwifi
-       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+       $(INSTALL_DIR) $(1)/lib/wifi
+       $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+       $(INSTALL_DIR) $(1)/usr/sbin
+       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
 endef
 
 $(eval $(call KernelPackage,madwifi))