local first=1
for vif in $vifs; do
+ local start_hostapd
nosbeacon=
config_get ifname "$vif" ifname
config_get enc "$vif" encryption
}
config_set "$vif" ifname "$ifname"
+ # only need to change freq band and channel on the first vif
+ config_get agmode "$device" agmode
+ [ -z "$agmode" ] && config_get agmode "$device" mode
+
+ pureg=0
+ case "$agmode" in
+ *b) agmode=11b;;
+ *bg) agmode=11g;;
+ *g) agmode=11g; pureg=1;;
+ *gdt) agmode=11gdt;;
+ *a) agmode=11a;;
+ *adt) agmode=11adt;;
+ *ast) agmode=11ast;;
+ *fh) agmode=fh;;
+ *) agmode=auto;;
+ esac
+ iwpriv "$ifname" mode "$agmode"
+ iwpriv "$ifname" pureg "$pureg"
+
[ "$first" = 1 ] && {
- # only need to change freq band and channel on the first vif
- config_get agmode "$device" agmode
- [ -z "$agmode" ] && config_get agmode "$device" mode
-
- pureg=0
- case "$agmode" in
- *b) agmode=11b;;
- *bg) agmode=11g;;
- *g) agmode=11g; pureg=1;;
- *gdt) agmode=11gdt;;
- *a) agmode=11a;;
- *adt) agmode=11adt;;
- *ast) agmode=11ast;;
- *fh) agmode=fh;;
- *) agmode=auto;;
- esac
- iwpriv "$ifname" mode "$agmode"
- iwpriv "$ifname" pureg "$pureg"
iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
}
[ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
}
- wpa=
case "$enc" in
WEP|wep)
for idx in 1 2 3 4; do
esac
;;
PSK|psk|PSK2|psk2)
+ start_hostapd=1
config_get key "$vif" key
;;
esac
config_get_bool isolate "$vif" isolate 0
iwpriv "$ifname" ap_bridge "$((isolate^1))"
- if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
+ if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
hostapd_setup_vif "$vif" madwifi || {
- echo "enable_atheros($device): Failed to set up wpa for interface $ifname" >&2
+ echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
# make sure this wifi interface won't accidentally stay open without encryption
ifconfig "$ifname" down
wlanconfig "$ifname" destroy
fi
;;
wds|sta)
- config_get_bool usepassphrase "$vif" passphrase 1
- case "$enc" in
- PSK|psk|PSK2|psk2)
- case "$enc" in
- PSK|psk)
- proto='proto=WPA'
- if [ "$usepassphrase" = "1" ]; then
- passphrase="psk=\"${key}\""
- else
- passphrase="psk=${key}"
- fi
- ;;
- PSK2|psk2)
- proto='proto=RSN'
- if [ "$usepassphrase" = "1" ]; then
- passphrase="psk=\"${key}\""
- else
- passphrase="psk=${key}"
- fi
- ;;
- esac
- cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-network={
- scan_ssid=1
- ssid="$ssid"
- key_mgmt=WPA-PSK
- $proto
- $passphrase
-}
-EOF
- ;;
- WPA|wpa|WPA2|wpa2i|8021x|8021X)
- config_get ca_cert "$vif" ca_cert
- eap_type=$(echo $eap_type | tr 'a-z' 'A-Z')
- case "$eap_type" in
- tls|TLS)
- proto='proto=WPA2'
- pairwise='pairwise=CCMP'
- group='group=CCMP'
- config_get priv_key "$vif" priv_key
- config_get priv_key_pwd "$vif" priv_key_pwd
- priv_key="private_key=\"$priv_key\""
- priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
- ;;
- peap|PEAP|ttls|TTLS)
- proto='proto=WPA2'
- config_get auth "$vif" auth
- config_get identity "$vif" identity
- config_get password "$vif" password
- phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
- identity="identity=\"$identity\""
- password="password=\"$password\""
- ;;
- esac
- cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-network={
- scan_ssid=1
- ssid="$ssid"
- key_mgmt=WPA-EAP
- $proto
- $pairwise
- $group
- eap=$eap_type
- ca_cert="$ca_cert"
- $priv_key
- $priv_key_pwd
- $phase2
- $identity
- $password
-}
-EOF
- ;;
- esac
- [ -z "$proto" ] || wpa_supplicant ${bridge:+ -b $bridge} -B -D madwifi -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
+ if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+ wpa_supplicant_setup_vif "$vif" madwifi || {
+ echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
+ ifconfig "$ifname" down
+ wlanconfig "$ifname" destroy
+ continue
+ }
+ fi
;;
esac
first=0