[ifxmips] adds support to build uboot for arv452

[openwrt/svn-archive/archive.git] / package / uboot-ifxmips / files / board / ifx / danube / flash.c

diff --git a/package/uboot-ifxmips/files/board/ifx/danube/flash.c b/package/uboot-ifxmips/files/board/ifx/danube/flash.c
index bc919c1c1c9b0f41d050018dc7167520a15cff28..d95888fdf5ca8c45faa8a499e5e92e4838d0435e 100644 (file)
--- a/package/uboot-ifxmips/files/board/ifx/danube/flash.c
+++ b/package/uboot-ifxmips/files/board/ifx/danube/flash.c
@@ -83,12 +83,10 @@ unsigned long flash_init (void)
        unsigned long size = 0;
        int i;
 
-       printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
        /* Init: no FLASHes known */
        for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {         // 1 bank 
                ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;      // 0xb0000000,  0xb4000000
 
-       printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
           volatile ulong * buscon = (ulong *)
                        ((i == 0) ? DANUBE_EBU_BUSCON0 : DANUBE_EBU_BUSCON1);
 
@@ -96,12 +94,10 @@ unsigned long flash_init (void)
 //             *buscon &= ~AMAZON_EBU_BUSCON0_WRDIS;
                /* Enable write protection */
                *buscon |= DANUBE_EBU_BUSCON0_WRDIS;
-printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 
 #if 1
                memset(&flash_info[i], 0, sizeof(flash_info_t));
 #endif
-printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
 
                flash_info[i].size = 
                        flash_get_size((FPW *)flashbase, &flash_info[i]);
@@ -463,23 +459,19 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 //             asm("SYNC");     
        switch (addr[1] & 0xff) {
        case (uchar)AMD_MANUFACT:
-               printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                info->flash_id = FLASH_MAN_AMD;
                break;
 
        case (uchar)INTEL_MANUFACT:                     // 0x0089
-               printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                info->flash_id = FLASH_MAN_INTEL; //0x00300000
                break;
                
 //joelin for MXIC              
        case (uchar)MX_MANUFACT:                // 0x00c2
-               printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                info->flash_id = FLASH_MAN_MX ;//0x00030000
                break;
                
        default:
-               printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                info->flash_id = FLASH_UNKNOWN;
                info->sector_count = 0;
                info->size = 0;
@@ -489,11 +481,9 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
                break;*/
        }
 
-       printf("%s:%s[%d] %08lx\n", __FILE__, __func__, __LINE__, addr[0]);
        /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
        if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
        case (FPW)EON_ID_EN29LV320B:
-               printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
                info->flash_id += FLASH_29LV320B;
                info->sector_count = 71;
                info->size = 0x00400000 * (sizeof(FPW)/2);