[uboot-lantiq] cleanup configuration handling

[openwrt/svn-archive/archive.git] / package / uboot-lantiq / Config.in

diff --git a/package/uboot-lantiq/Config.in b/package/uboot-lantiq/Config.in
index 7544e711dfe3485be5a152db3edef0aca1b829d9..e2c156d884b372177fe4bf52bd1f44692c477ed0 100644 (file)
--- a/package/uboot-lantiq/Config.in
+++ b/package/uboot-lantiq/Config.in
@@ -1,32 +1,35 @@
-config UBOOT_CONFIG
-   string "configuration file"
-   default "easy50712_DDR166M"
-   help
-     The configuration reflects the settings for a dedicated board hardware.
-     Select for Danube evaluation board easy50712_DDR166M .
-     Select for AR9 evaluation board easy50812_DDR166M .
-
-config UBOOT_DDR_CONFIG
-   string "DDR configuration file"
-   default "danube_ref_ddr166.conf"
-   depends on UBOOT_RAMBOOT
-   help
-     The DDR configuration file should reflect the DDR memory device configuration .
-     It will be used to create a RAM boot image
-     Select for Danube evalution board danube_ref_ddr166.conf .
-     Select for AR9 evalution board easy50812.conf .
+config UBOOT_TARGET
+       string "target"
+       default "easy50712_DDR166M"
+       depends on PACKAGE_uboot-lantiq
+       help
+         The configuration reflects the settings for a dedicated board hardware.
+         Select for Danube evaluation board easy50712_DDR166M .
+         Select for AR9 evaluation board easy50812_DDR166M .
 
 config UBOOT_RAMBOOT
-   bool "Enable RAM boot image"
-   help
-     Using the UART boot mode of the ROM code this image could be loaded to the RAM.
-     Executing the image in the RAM the functionality of the uboot image can be 
-     tested first without touching the original flash.
-     Note: Be carefull, by saving the environment the flash will be modified.
-     The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
+       bool "Enable RAM boot image"
+       depends on PACKAGE_uboot-lantiq
+       help
+         Using the UART boot mode of the ROM code this image could be loaded to the RAM.
+         While executing the image in the RAM the functionality of the uboot image can be 
+         tested first without touching the original flash.
+         Note: Be carefull, by saving the environment the flash will be modified.
+         The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
+
+config UBOOT_RAMBOOT_DDR_CONFIG
+       string "DDR configuration file"
+       default "easy50712_DDR166M.conf"
+       depends on UBOOT_RAMBOOT
+       help
+         The DDR configuration file should reflect the DDR memory device configuration .
+         It will be used to create a RAM boot image
+         Select for Danube evalution board easy50712_DDR166M.conf .
+         Select for AR9 evalution board easy50812.conf .
+
 
-config IFXMIPS_UBOOT_A800
+config UBOOT_A800
        bool "add ARV452 Switch bringup hack"
-       depends on PACKAGE_uboot-ifxmips
+       depends on PACKAGE_uboot-lantiq
        help
          Say Y, if you have a arv452 board (wav-281, A800, ..)