/*
* Atheros AP83 board support
*
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
+
+#include "devices.h"
#define AP83_GPIO_LED_WLAN 6
#define AP83_GPIO_LED_POWER 14
#define AP83_GPIO_LED_JUMPSTART 15
+#define AP83_GPIO_BTN_JUMPSTART 12
+#define AP83_GPIO_BTN_RESET 21
+
+#define AP83_GPIO_VSC7385_CS 1
+#define AP83_GPIO_VSC7385_MISO 3
+#define AP83_GPIO_VSC7385_MOSI 16
+#define AP83_GPIO_VSC7385_SCK 17
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition ap83_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "rootfs",
+ .offset = 0x060000,
+ .size = 0x400000,
+ } , {
+ .name = "kernel",
+ .offset = 0x460000,
+ .size = 0x100000,
+ } , {
+ .name = "art",
+ .offset = 0x560000,
+ .size = 0x2a0000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x060000,
+ .size = 0x500000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data ap83_flash_data = {
+ .width = 2,
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = ap83_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
+#endif
+};
+
+static struct resource ap83_flash_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = ap83_flash_resources,
+ .num_resources = ARRAY_SIZE(ap83_flash_resources),
+ .dev = {
+ .platform_data = &ap83_flash_data,
+ }
+};
static struct gpio_led ap83_leds_gpio[] __initdata = {
{
},
};
+static struct gpio_button ap83_gpio_buttons[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = AP83_GPIO_BTN_RESET,
+ .active_low = 1,
+ } , {
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = AP83_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ }
+};
+
+static struct spi_gpio_platform_data ap83_spi_data = {
+ .miso = AP83_GPIO_VSC7385_MISO,
+ .mosi = AP83_GPIO_VSC7385_MOSI,
+ .sck = AP83_GPIO_VSC7385_SCK,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ap83_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap83_spi_data,
+ }
+};
+
static void __init ap83_setup(void)
{
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
+
ar71xx_add_device_eth(1);
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+ ap83_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
+ ap83_gpio_buttons);
+
+ ar71xx_add_device_usb();
+
+ ar91xx_add_device_wmac();
+ platform_device_register(&ap83_spi_device);
+ platform_device_register(&ap83_flash_device);
}
-MIPS_MACHINE(MACH_AR71XX_AP83, "Atheros AP83", ap83_setup);
+MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);