[ar71xx] add support for board specific PLL settings

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap83.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
index dfb9b6606d5262b60c8ec2dc9ebf0a38658d3130..8b5dbca34b27fd632404e609a69403f701a93d82 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
@@ -1,7 +1,7 @@
 /*
  *  Atheros AP83 board support
  *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -11,11 +11,13 @@
 
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
+
+#include "devices.h"
 
 #define AP83_GPIO_LED_WLAN     6
 #define AP83_GPIO_LED_POWER    14
@@ -23,6 +25,11 @@
 #define AP83_GPIO_BTN_JUMPSTART        12
 #define AP83_GPIO_BTN_RESET    21
 
+#define AP83_GPIO_VSC7385_CS   1
+#define AP83_GPIO_VSC7385_MISO 3
+#define AP83_GPIO_VSC7385_MOSI 16
+#define AP83_GPIO_VSC7385_SCK  17
+
 static struct gpio_led ap83_leds_gpio[] __initdata = {
        {
                .name           = "ap83:green:jumpstart",
@@ -47,7 +54,7 @@ static struct gpio_button ap83_gpio_buttons[] __initdata = {
                .threshold      = 5,
                .gpio           = AP83_GPIO_BTN_RESET,
                .active_low     = 1,
-       } , }
+       } , {
                .desc           = "jumpstart",
                .type           = EV_KEY,
                .code           = BTN_1,
@@ -57,6 +64,21 @@ static struct gpio_button ap83_gpio_buttons[] __initdata = {
        }
 };
 
+static struct spi_gpio_platform_data ap83_spi_data = {
+       .miso   = AP83_GPIO_VSC7385_MISO,
+       .mosi   = AP83_GPIO_VSC7385_MOSI,
+       .sck    = AP83_GPIO_VSC7385_SCK,
+       .num_chipselect = 1,
+};
+
+static struct platform_device ap83_spi_device = {
+       .name           = "spi_gpio",
+       .id             = 0,
+       .dev            = {
+               .platform_data = &ap83_spi_data,
+       }
+};
+
 static void __init ap83_setup(void)
 {
        ar71xx_add_device_mdio(0xfffffffe);
@@ -71,6 +93,8 @@ static void __init ap83_setup(void)
        ar71xx_eth1_data.speed = SPEED_1000;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
 
+       ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
+
        ar71xx_add_device_eth(1);
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
@@ -80,6 +104,10 @@ static void __init ap83_setup(void)
                                        ap83_gpio_buttons);
 
        ar71xx_add_device_usb();
+
+       ar91xx_add_device_wmac();
+
+       platform_device_register(&ap83_spi_device);
 }
 
 MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);