ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap83.c
index acb9f5a..bcd2fae 100644 (file)
@@ -22,7 +22,7 @@
 
 #include "machtype.h"
 #include "devices.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -38,7 +38,8 @@
 #define AP83_050_GPIO_VSC7385_MOSI     16
 #define AP83_050_GPIO_VSC7385_SCK      17
 
-#define AP83_BUTTONS_POLL_INTERVAL     20
+#define AP83_KEYS_POLL_INTERVAL                20      /* msecs */
+#define AP83_KEYS_DEBOUNCE_INTERVAL    (3 * AP83_KEYS_POLL_INTERVAL)
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition ap83_flash_partitions[] = {
@@ -47,25 +48,25 @@ static struct mtd_partition ap83_flash_partitions[] = {
                .offset         = 0,
                .size           = 0x040000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "u-boot-env",
                .offset         = 0x040000,
                .size           = 0x020000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "kernel",
                .offset         = 0x060000,
                .size           = 0x140000,
-       } , {
+       }, {
                .name           = "rootfs",
                .offset         = 0x1a0000,
                .size           = 0x650000,
-       } , {
+       }, {
                .name           = "art",
                .offset         = 0x7f0000,
                .size           = 0x010000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "firmware",
                .offset         = 0x060000,
                .size           = 0x790000,
@@ -76,8 +77,8 @@ static struct mtd_partition ap83_flash_partitions[] = {
 static struct ar91xx_flash_platform_data ap83_flash_data = {
        .width          = 2,
 #ifdef CONFIG_MTD_PARTITIONS
-        .parts          = ap83_flash_partitions,
-        .nr_parts       = ARRAY_SIZE(ap83_flash_partitions),
+       .parts          = ap83_flash_partitions,
+       .nr_parts       = ARRAY_SIZE(ap83_flash_partitions),
 #endif
 };
 
@@ -115,19 +116,19 @@ static struct gpio_led ap83_leds_gpio[] __initdata = {
        },
 };
 
-static struct gpio_button ap83_gpio_buttons[] __initdata = {
+static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
        {
                .desc           = "soft_reset",
                .type           = EV_KEY,
                .code           = KEY_RESTART,
-               .threshold      = 3,
+               .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = AP83_GPIO_BTN_RESET,
                .active_low     = 1,
-       } , {
+       }, {
                .desc           = "jumpstart",
                .type           = EV_KEY,
                .code           = KEY_WPS_BUTTON,
-               .threshold      = 3,
+               .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = AP83_GPIO_BTN_JUMPSTART,
                .active_low     = 1,
        }
@@ -196,15 +197,15 @@ static void __init ap83_generic_setup(void)
 {
        u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(eeprom);
-
        ar71xx_add_device_mdio(0xfffffffe);
 
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = 0x1;
 
        ar71xx_add_device_eth(0);
 
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1);
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.speed = SPEED_1000;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
@@ -216,13 +217,13 @@ static void __init ap83_generic_setup(void)
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
                                        ap83_leds_gpio);
 
-       ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
-                                       ARRAY_SIZE(ap83_gpio_buttons),
-                                       ap83_gpio_buttons);
+       ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(ap83_gpio_keys),
+                                        ap83_gpio_keys);
 
        ar71xx_add_device_usb();
 
-       ar913x_add_device_wmac(eeprom, NULL);
+       ar9xxx_add_device_wmac(eeprom, NULL);
 
        platform_device_register(&ap83_flash_device);
 
@@ -231,7 +232,7 @@ static void __init ap83_generic_setup(void)
 
 static void __init ap83_040_setup(void)
 {
-       ap83_flash_data.is_shared=1;
+       ap83_flash_data.is_shared = 1;
        ap83_generic_setup();
        platform_device_register(&ap83_040_spi_device);
 }