#include <asm/mach-ar71xx/pci.h>
#include <asm/mach-ar71xx/platform.h>
+#define AP83_GPIO_LED_WLAN 6
+#define AP83_GPIO_LED_POWER 14
+#define AP83_GPIO_LED_JUMPSTART 15
+#define AP83_GPIO_BTN_JUMPSTART 12
+#define AP83_GPIO_BTN_RESET 21
+
+static struct gpio_led ap83_leds_gpio[] __initdata = {
+ {
+ .name = "ap83:green:jumpstart",
+ .gpio = AP83_GPIO_LED_JUMPSTART,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:power",
+ .gpio = AP83_GPIO_LED_POWER,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:wlan",
+ .gpio = AP83_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_button ap83_gpio_buttons[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = AP83_GPIO_BTN_RESET,
+ .active_low = 1,
+ } , }
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = AP83_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ }
+};
+
static void __init ap83_setup(void)
{
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_eth0_data.phy_mask = 0x1;
ar71xx_add_device_eth(0);
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth1_data.phy_mask = 0x0;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+ ap83_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
+ ap83_gpio_buttons);
+
+ ar71xx_add_device_usb();
}
-MIPS_MACHINE(MACH_AR71XX_AP83, "Atheros AP83", ap83_setup);
+MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);