ar71xx: move AP94 specific PCI init code into a separate file

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-aw-nr580.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
index c8a37bfe1d9160214e84828d614f6bb6f8fc668b..d8bed69340f07505947d2bd8b779cc5ef9e38c98 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -21,20 +19,90 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
-static struct spi_board_info aw_nr580_spi_info[] = {
+#define AW_NR580_GPIO_LED_READY_RED    0
+#define AW_NR580_GPIO_LED_WLAN         1
+#define AW_NR580_GPIO_LED_READY_GREEN  2
+#define AW_NR580_GPIO_LED_WPS_GREEN    4
+#define AW_NR580_GPIO_LED_WPS_AMBER    5
+
+#define AW_NR580_GPIO_BTN_WPS          3
+#define AW_NR580_GPIO_BTN_RESET                11
+
+#define AW_NR580_BUTTONS_POLL_INTERVAL 20
+
+static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
        {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
+               .name           = "aw-nr580:red:ready",
+               .gpio           = AW_NR580_GPIO_LED_READY_RED,
+               .active_low     = 0,
+       }, {
+               .name           = "aw-nr580:green:ready",
+               .gpio           = AW_NR580_GPIO_LED_READY_GREEN,
+               .active_low     = 0,
+       }, {
+               .name           = "aw-nr580:green:wps",
+               .gpio           = AW_NR580_GPIO_LED_WPS_GREEN,
+               .active_low     = 0,
+       }, {
+               .name           = "aw-nr580:amber:wps",
+               .gpio           = AW_NR580_GPIO_LED_WPS_AMBER,
+               .active_low     = 0,
+       }, {
+               .name           = "aw-nr580:green:wlan",
+               .gpio           = AW_NR580_GPIO_LED_WLAN,
+               .active_low     = 0,
+       }
+};
+
+static struct gpio_button aw_nr580_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 5,
+               .gpio           = AW_NR580_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 5,
+               .gpio           = AW_NR580_GPIO_BTN_WPS,
+               .active_low     = 1,
+       }
+};
+
+static struct ar71xx_pci_irq aw_nr580_pci_irqs[] __initdata = {
+       {
+               .slot   = 1,
+               .pin    = 1,
+               .irq    = AR71XX_PCI_IRQ_DEV1,
        }
 };
 
 static void __init aw_nr580_setup(void)
 {
-       ar71xx_add_device_spi(NULL, aw_nr580_spi_info,
-                                       ARRAY_SIZE(aw_nr580_spi_info));
+       ar71xx_add_device_mdio(0x0);
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ar71xx_eth0_data.phy_mask = 0xf;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+       ar71xx_add_device_eth(0);
+
+       ar71xx_pci_init(ARRAY_SIZE(aw_nr580_pci_irqs), aw_nr580_pci_irqs);
+
+       ar71xx_add_device_m25p80(NULL);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
+                                       aw_nr580_leds_gpio);
+
+       ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(aw_nr580_gpio_buttons),
+                                       aw_nr580_gpio_buttons);
 }
 
 MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AzureWave AW-NR580", aw_nr580_setup);