ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr741nd.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
index e3abf1e140def2462ab10403b3d92763cda31bca..909327ac7501ccd9481556926734e36e7bf565a9 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
@@ -1,25 +1,24 @@
 /*
  *  TP-LINK TL-WR741ND board support
  *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
-
-#include <asm/mips_machine.h>
 
 #include <asm/mach-ar71xx/ar71xx.h>
 
+#include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
 
 #define TL_WR741ND_GPIO_LED_QSS                0
 #define TL_WR741ND_GPIO_LED_SYSTEM     1
@@ -36,20 +35,20 @@ static struct mtd_partition tl_wr741nd_partitions[] = {
                .offset         = 0,
                .size           = 0x020000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "kernel",
                .offset         = 0x020000,
                .size           = 0x140000,
-       } , {
+       }, {
                .name           = "rootfs",
                .offset         = 0x160000,
                .size           = 0x290000,
-       } , {
+       }, {
                .name           = "art",
                .offset         = 0x3f0000,
                .size           = 0x010000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "firmware",
                .offset         = 0x020000,
                .size           = 0x3d0000,
@@ -59,8 +58,8 @@ static struct mtd_partition tl_wr741nd_partitions[] = {
 
 static struct flash_platform_data tl_wr741nd_flash_data = {
 #ifdef CONFIG_MTD_PARTITIONS
-        .parts          = tl_wr741nd_partitions,
-        .nr_parts       = ARRAY_SIZE(tl_wr741nd_partitions),
+       .parts          = tl_wr741nd_partitions,
+       .nr_parts       = ARRAY_SIZE(tl_wr741nd_partitions),
 #endif
 };
 
@@ -80,15 +79,15 @@ static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
-               .threshold      = 5,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
                .gpio           = TL_WR741ND_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "qss",
                .type           = EV_KEY,
-               .code           = BTN_1,
-               .threshold      = 5,
+               .code           = KEY_WPS_BUTTON,
+               .threshold      = 3,
                .gpio           = TL_WR741ND_GPIO_BTN_QSS,
                .active_low     = 1,
        }
@@ -99,39 +98,37 @@ static void __init tl_wr741nd_setup(void)
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
+                                       tl_wr741nd_leds_gpio);
+
+       ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(tl_wr741nd_gpio_buttons),
+                                       tl_wr741nd_gpio_buttons);
+
+       ar71xx_eth1_data.has_ar7240_switch = 1;
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
        /* WAN port */
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0x0;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
+       ar71xx_eth0_data.phy_mask = BIT(4);
 
        /* LAN ports */
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.phy_mask = 0x0;
        ar71xx_eth1_data.speed = SPEED_1000;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
 
+       ar71xx_add_device_mdio(0x0);
        ar71xx_add_device_eth(1);
        ar71xx_add_device_eth(0);
 
-       ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
-
-       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
-                                       tl_wr741nd_leds_gpio);
-
-       ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
-                                       ARRAY_SIZE(tl_wr741nd_gpio_buttons),
-                                       tl_wr741nd_gpio_buttons);
+       ap91_pci_setup_wmac_led_pin(1);
 
-       ap91_pci_init(ee, NULL);
+       ap91_pci_init(ee, mac);
 }
-MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TP-LINK TL-WR741ND", tl_wr741nd_setup);
+MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+            tl_wr741nd_setup);