ar71xx: move mach type definitions into a separate include file

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr741nd.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
index 10f7e8ead8bf80ae9c983aec16335fbe8731f08d..ecedbb5a82309c165fc260fabfc26dac845924ee 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
@@ -8,21 +8,17 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/pci.h>
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mips_machine.h>
 
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
+#include "machtype.h"
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
 
 #define TL_WR741ND_GPIO_LED_QSS                0
 #define TL_WR741ND_GPIO_LED_SYSTEM     1
@@ -67,16 +63,6 @@ static struct flash_platform_data tl_wr741nd_flash_data = {
 #endif
 };
 
-static struct spi_board_info tl_wr741nd_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &tl_wr741nd_flash_data,
-       }
-};
-
 static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
        {
                .name           = "tl-wr741nd:green:system",
@@ -107,41 +93,10 @@ static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
        }
 };
 
-#ifdef CONFIG_PCI
-static struct ar71xx_pci_irq tl_wr741nd_pci_irqs[] __initdata = {
-       {
-               .slot   = 0,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }
-};
-
-static struct ath9k_platform_data tl_wr741nd_wmac_data;
-
-static int tl_wr741nd_pci_plat_dev_init(struct pci_dev *dev)
-{
-       dev->dev.platform_data = &tl_wr741nd_wmac_data;
-       return 0;
-}
-
-static void tl_wr741nd_pci_init(void)
-{
-       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-       memcpy(tl_wr741nd_wmac_data.eeprom_data, ee,
-              sizeof(tl_wr741nd_wmac_data.eeprom_data));
-
-       ar71xx_pci_plat_dev_init = tl_wr741nd_pci_plat_dev_init;
-
-       ar71xx_pci_init(ARRAY_SIZE(tl_wr741nd_pci_irqs), tl_wr741nd_pci_irqs);
-}
-#else
-static inline void tl_wr741nd_pci_init(void) { };
-#endif /* CONFIG_PCI */
-
 static void __init tl_wr741nd_setup(void)
 {
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
        ar71xx_set_mac_base(mac);
        ar71xx_add_device_mdio(0x0);
@@ -151,18 +106,23 @@ static void __init tl_wr741nd_setup(void)
        ar71xx_eth0_data.phy_mask = 0x0;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+       ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+       ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
 
        /* LAN ports */
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = 0x0;
        ar71xx_eth1_data.speed = SPEED_1000;
        ar71xx_eth1_data.duplex = DUPLEX_FULL;
+       ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+       ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+       ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
 
        ar71xx_add_device_eth(1);
        ar71xx_add_device_eth(0);
 
-       ar71xx_add_device_spi(NULL, tl_wr741nd_spi_info,
-                                       ARRAY_SIZE(tl_wr741nd_spi_info));
+       ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
                                        tl_wr741nd_leds_gpio);
@@ -171,6 +131,6 @@ static void __init tl_wr741nd_setup(void)
                                        ARRAY_SIZE(tl_wr741nd_gpio_buttons),
                                        tl_wr741nd_gpio_buttons);
 
-       tl_wr741nd_pci_init();
+       ap91_pci_init(ee, NULL);
 }
 MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TP-LINK TL-WR741ND", tl_wr741nd_setup);