ar71xx: add support for the TL-MR3420 v1 board

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wnr2000.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
index 73422d6badbac14816fb0873cf7e019c541836f2..002c8ab9f2daf1d86570776ac05765fe6eae6e8f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
@@ -102,13 +102,13 @@ static struct gpio_button wnr2000_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_RESTART,
                .threshold      = 3,
                .gpio           = WNR2000_GPIO_BTN_RESET,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = KEY_WPS_BUTTON,
                .threshold      = 3,
                .gpio           = WNR2000_GPIO_BTN_WPS,
        }
@@ -118,14 +118,15 @@ static void __init wnr2000_setup(void)
 {
        u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(eeprom);
        ar71xx_add_device_mdio(0x0);
 
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
        ar71xx_eth0_data.has_ar8216 = 1;
 
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1);
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = 0x10;