* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define WP543_GPIO_SW6 2
#define WP543_GPIO_LED_1 3
#define WP543_GPIO_LED_DIAG 7
#define WP543_GPIO_SW4 8
-#define WP543_BUTTONS_POLL_INTERVAL 20
-
-static struct spi_board_info wp543_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }
-};
+#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
static struct gpio_led wp543_leds_gpio[] __initdata = {
{
}
};
-static struct gpio_button wp543_gpio_buttons[] __initdata = {
+static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
{
.desc = "sw6",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
.gpio = WP543_GPIO_SW6,
}, {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
.gpio = WP543_GPIO_SW4,
}
};
static void __init wp543_setup(void)
{
- ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+ ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_mdio(0xfffffff7);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = 0x00000008;
+ ar71xx_eth0_data.phy_mask = 0x08;
ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
RESET_MODULE_GE0_PHY;
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
- ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
+ pb42_pci_init();
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
wp543_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(wp543_gpio_buttons),
- wp543_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wp543_gpio_keys),
+ wp543_gpio_keys);
}
-MIPS_MACHINE(AR71XX_MACH_WP543, "Compex WP543", wp543_setup);
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);