ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wp543.c
index fee4b98..d85f13e 100644 (file)
@@ -1,5 +1,5 @@
 /*
- *  Compex WP543 board support
+ *  Compex WP543/WPJ543 board support
  *
  *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
@@ -9,18 +9,18 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
 
-#include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
+#include "machtype.h"
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
 
 #define WP543_GPIO_SW6         2
 #define WP543_GPIO_LED_1       3
 #define WP543_GPIO_LED_DIAG    7
 #define WP543_GPIO_SW4         8
 
-#define WP543_BUTTONS_POLL_INTERVAL    20
-
-static struct spi_board_info wp543_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-       }
-};
-
-static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
-       {
-               .slot   = 0,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }, {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }, {
-               .slot   = 2,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV2,
-       }
-};
+#define WP543_KEYS_POLL_INTERVAL       20      /* msecs */
+#define WP543_KEYS_DEBOUNCE_INTERVAL   (3 * WP543_KEYS_POLL_INTERVAL)
 
 static struct gpio_led wp543_leds_gpio[] __initdata = {
        {
@@ -81,44 +57,45 @@ static struct gpio_led wp543_leds_gpio[] __initdata = {
        }
 };
 
-static struct gpio_button wp543_gpio_buttons[] __initdata = {
+static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
        {
                .desc           = "sw6",
                .type           = EV_KEY,
                .code           = BTN_0,
-               .threshold      = 5,
+               .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WP543_GPIO_SW6,
        }, {
                .desc           = "sw4",
                .type           = EV_KEY,
                .code           = BTN_1,
-               .threshold      = 5,
+               .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WP543_GPIO_SW4,
        }
 };
 
 static void __init wp543_setup(void)
 {
-       ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+       ar71xx_add_device_m25p80(NULL);
 
        ar71xx_add_device_mdio(0xfffffff7);
 
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-       ar71xx_eth0_data.phy_mask = 0x00000008;
+       ar71xx_eth0_data.phy_mask = 0x08;
        ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
                                     RESET_MODULE_GE0_PHY;
        ar71xx_add_device_eth(0);
 
        ar71xx_add_device_usb();
 
-       ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
+       pb42_pci_init();
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
                                        wp543_leds_gpio);
 
-       ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
-                                       ARRAY_SIZE(wp543_gpio_buttons),
-                                       wp543_gpio_buttons);
+       ar71xx_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(wp543_gpio_keys),
+                                        wp543_gpio_keys);
 }
 
-MIPS_MACHINE(AR71XX_MACH_WP543, "Compex WP543", wp543_setup);
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);