ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wzr-hp-g300nh.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
index c6fb241c51ab5f4ef4db14031c59846157cabe66..c12b0a041521a9b56c21f56440a7e78ab2f2919e 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
@@ -147,14 +147,14 @@ static struct gpio_button wzrhpg300nh_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_RESTART,
                .threshold      = 3,
                .gpio           = WZRHPG300NH_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "aoss",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = KEY_WPS_BUTTON,
                .threshold      = 3,
                .gpio           = WZRHPG300NH_GPIO_BTN_AOSS,
                .active_low     = 1,
@@ -234,7 +234,6 @@ static void __init wzrhpg300nh_setup(void)
        ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
        ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_1000;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;