ar71xx: add profile and build image for the ZyXEL NBG6716 board
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / image / Makefile
index 9295699e31ba9b500ce6c564f87705435d4b05ee..8234f88eaa8738b1958979ef8ed659e4dff57ea5 100644 (file)
@@ -285,6 +285,8 @@ wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(ca
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
+zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubiroot)
+
 
 define Image/BuildKernel
        cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -881,6 +883,43 @@ ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
 endif
 
 
+define Image/Build/ZyXELNAND/buildkernel
+       $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
+       $(call MkuImageLzma,$(2),$(3) $(5) $(6))
+       mkdir -p $(KDIR_TMP)/$(2)/image/boot
+       cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
+       $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+               --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
+               -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
+               -d $(KDIR_TMP)/$(2)/image \
+               2>&1 1>/dev/null | awk '/^.+$$$$/'
+       -rm -rf $(KDIR_TMP)/$(2)
+endef
+
+define Image/Build/ZyXELNAND
+       if [ "$(1)" != "squashfs" ]; then \
+               echo Only squashfs is supported; \
+               return 0; \
+       fi
+       $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+       $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+       $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+       $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
+       echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
+       $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+       ( \
+               dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+               dd if=$(KDIR_TMP)/$(2)-root.ubi \
+       ) > $(imageraw)
+       dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
+               bs=128k conv=sync
+       ( \
+               dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+               dd if=$(KDIR)/root.$(1) bs=128k conv=sync \
+       ) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin
+endef
+
+
 Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
 
 define Image/Build/OpenMesh
@@ -1180,6 +1219,8 @@ ifeq ($(SUBTARGET),nand)
 $(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700V4,"",-H 29763948+128+128,wndr4300))
 $(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
 
+$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),ubi.mtd=ubiroot mem=256M))
+
 $(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
 endif # ifeq ($(SUBTARGET),nand)