# $(4) : board name.
# $(5)~$(7) : arguments for $(mkcmdline)
# board=$(1) console=$(2),$(3)
-# $(8)~$(12): extra arguments.
+# $(8)~$(14): extra arguments.
define SingleProfile
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
define Image/Build/Profile/$(3)
- $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12))
+ $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
endef
SINGLE_PROFILES += $(3)
endef
endif
# $(1): name of the 1st file.
+# $(2): size limit of the 1st file if it is greater than 262144, or
+# the erase size of the flash if it is greater than zero and less
+# than 262144
# $(3): name of the 2nd file.
+# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
+# it is the size limit of the output file
# $(5): name of the output file.
# $(6): padding size.
define CatFiles
- # $(4): size limit of the output file.
if [ $(2) -eq 0 ]; then \
filename="$(3)"; fstype=$$$${filename##*\.}; \
case "$$$${fstype}" in \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
- # $(2): size limit of the 1st file.
- # $(4): size limit of the 2nd file.
else if [ $(2) -gt 262144 ]; then \
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
fi; fi; \
- # $(2): padding size for the 2nd file.
- # $(4): size limit of the output file.
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
+hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubiroot),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) ubi.mtd=ubiroot
+wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
+zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
+
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+define MkuImageHiWiFi
+ # Field ih_name needs to start with "tw150v1"
+ mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
+ -e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $(3) $(4)
+endef
+
+define MkuImageLzmaHiWiFi
+ $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
+ $(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
+endef
+
+Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
+Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
+Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
# $(6): Board name (upper caps)
# $(7): firmware region code (not used yet)
# $(8): DNI Hardware version
+# $(9): suffix of the configuration file for ubinize
define Image/Build/NetgearNAND
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
- $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+ $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
-i $(imageraw) \
-o $(call imgname,ubi,$(2))-factory.img
+
+ $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
endif
+define Image/Build/ZyXELNAND/buildkernel
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
+ $(call MkuImageLzma,$(2),$(3) $(5) $(6))
+ mkdir -p $(KDIR_TMP)/$(2)/image/boot
+ cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
+ -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
+ -d $(KDIR_TMP)/$(2)/image \
+ 2>&1 1>/dev/null | awk '/^.+$$$$/'
+ -rm -rf $(KDIR_TMP)/$(2)
+endef
+
+define Image/Build/ZyXELNAND
+ if [ "$(1)" != "squashfs" ]; then \
+ echo Only squashfs is supported; \
+ return 0; \
+ fi
+ $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+ $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+ $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
+ $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+ ( \
+ dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+ dd if=$(KDIR_TMP)/$(2)-root.ubi \
+ ) > $(imageraw)
+ dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
+ bs=128k conv=sync
+ $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
+endef
+
+
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
define Image/Build/OpenMesh
define Jffs2Template
define Image/Build/Template/$(1)/jffs2-$(2)
- $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
endef
# $(3) : kernel command line.
# $(4)~$(8): extra arguments.
define Image/Build/Template/$(1)/initramfs
- $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/loader
- $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/buildkernel
- $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/squashfs
- $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+ $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
$(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
endef
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
+$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
+$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
+
$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
+$(eval $(call SingleProfile,TPLINK,64kraw,TLWA730REV1,tl-wa730rev1,TL-WA901ND,ttyS0,115200,0x07300001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA830RV1,tl-wa830re-v1,TL-WA901ND,ttyS0,115200,0x08300010,1,4M))
$(eval $(call MultiProfile,TLMR3040,TLMR3040V1 TLMR3040V2))
$(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
+$(eval $(call MultiProfile,TLWA730RE,TLWA730REV1))
$(eval $(call MultiProfile,TLWA801,TLWA801NV1 TLWA801NV2))
$(eval $(call MultiProfile,TLWA830,TLWA830RV1))
$(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2 TLWA901NV3))
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
+
+$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
+
+$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
endif # ifeq ($(SUBTARGET),nand)
projects / openwrt / svn-archive / archive.git / blobdiff