ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / image / Makefile
index 9cd9c26..f7b8381 100644 (file)
@@ -11,8 +11,111 @@ IMAGE_PROFILE:=$(if $(PROFILE),$(PROFILE),Default)
 
 JFFS2_BLOCKSIZE = 64k 128k 256k
 
+KERNEL_LOADADDR = 0x80060000
+
+DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD NETGEAR_ID CMDLINE CONSOLE
+
+define Build/netgear-squashfs
+       rm -rf $@.fs $@.squashfs
+       mkdir -p $@.fs/image
+       cp $@ $@.fs/image/uImage
+       $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
+               $@.fs $@.squashfs \
+               -noappend -root-owned -be -b 65536
+       dd if=/dev/zero bs=1k count=1 >> $@.squashfs
+       mkimage \
+               -A mips -O linux -T filesystem -C none \
+               -M $(NETGEAR_KERNEL_MAGIC) \
+               -a 0xbf070000 -e 0xbf070000 \
+               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $@.squashfs $@
+       rm -rf $@.squashfs $@.fs
+endef
+
+define Build/netgear-uImage
+       $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
+endef
+
+define Build/netgear-image
+       $(STAGING_DIR_HOST)/bin/mkdniimg \
+               -B $(NETGEAR_BOARD) -v OpenWrt.$(REVISION) \
+               $(if $(NETGEAR_ID),-H $(NETGEAR_ID)) \
+               -r "$(1)" \
+               -i $@ -o $@.new
+       mv $@.new $@
+endef
+
+define Device/Default
+  BOARDNAME :=
+  DEVICE_PROFILE = $$(BOARDNAME)
+  PROFILES = Default Minimal $$(DEVICE_PROFILE)
+  MTDPARTS :=
+  IMAGES := sysupgrade.bin
+  BLOCKSIZE := 64k
+  FILESYSTEMS = $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-$$(BLOCKSIZE)
+  CONSOLE = ttyS0,115200
+  CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
+  KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/carambola2
+  BOARDNAME = CARAMBOLA2
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += carambola2
+
+define Device/wndr3700
+  BOARDNAME = WNDR3700
+  NETGEAR_KERNEL_MAGIC = 0x33373030
+  NETGEAR_BOARD = WNDR3700
+  MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
+  IMAGES := sysupgrade.bin factory.img factory-NA.img
+  KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
+  IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img = $$(IMAGE/sysupgrade.bin) | netgear-image
+  IMAGE/factory-NA.img = $$(IMAGE/sysupgrade.bin) | netgear-image NA
+endef
+
+define Device/wndr3700v2
+$(Device/wndr3700)
+  NETGEAR_BOARD = WNDR3700v2
+  NETGEAR_KERNEL_MAGIC = 0x33373031
+  NETGEAR_ID = 29763654+16+64
+  MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
+  IMAGES := sysupgrade.bin factory.img
+endef
+
+define Device/wndr3800
+$(Device/wndr3700v2)
+  NETGEAR_BOARD = WNDR3800
+  NETGEAR_ID = 29763654+16+128
+endef
+
+define Device/wndr3800ch
+$(Device/wndr3800)
+  NETGEAR_BOARD = WNDR3800CH
+endef
+
+define Device/wndrmac
+$(Device/wndr3700v2)
+  NETGEAR_BOARD = WNDRMAC
+endef
+
+define Device/wndrmacv2
+$(Device/wndr3800)
+  NETGEAR_BOARD = WNDRMACv2
+endef
+
+TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
+
 rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
 
+# $(1): rootfs type.
+# $(2): board name.
 define imgname
 $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
 endef
@@ -36,18 +139,28 @@ $(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
 endef
 
 define mtdpartsize
-$(shell echo $$((`echo '$(2)' | sed -e 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/'` * 1024)))
+$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
 endef
 
 SINGLE_PROFILES:=
 
+# $(1)      : name of image build method to be used, e.g., TPLINK-LZMA, AthLzma.
+# $(2)      : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
+# $(3)      : name of the profile to be defined.
+# $(4)      : board name.
+# $(5)~$(7) : arguments for $(mkcmdline)
+#              board=$(1) console=$(2),$(3)
+# $(8)~$(14): extra arguments.
 define SingleProfile
+  # $(1): action name, e.g. loader, buildkernel, squashfs, etc.
   define Image/Build/Profile/$(3)
-       $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12))
+       $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
   endef
   SINGLE_PROFILES += $(3)
 endef
 
+# $(1), name of the MultiProfile to be added.
+# $(2), name of Profiles to be included in the MultiProfile.
 define MultiProfile
   define Image/Build/Profile/$(1)
        $(foreach p,$(2),
@@ -62,6 +175,9 @@ KDIR_TMP:=$(KDIR)/tmp
 VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
 UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
 
+# $(1): input file.
+# $(2): output file.
+# $(3): extra arguments for lzma.
 define CompressLzma
   $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
 endef
@@ -76,6 +192,10 @@ define PatchKernel/initramfs
        cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
 endef
 
+# $(1): board name.
+# $(2): kernel command line.
+# $(3): extra argumetns for lzma.
+# $(4): name suffix, e.g. "-initramfs".
 define PatchKernelLzma
        cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
        $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
@@ -89,12 +209,21 @@ define PatchKernelGzip
 endef
 
 ifneq ($(SUBTARGET),mikrotik)
+# $(1): compression method of the data.
+# $(2): extra arguments.
+# $(3): input data file.
+# $(4): output file.
 define MkuImage
        mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
                -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
                -d $(3) $(4)
 endef
 
+# $(1): board name.
+# $(2): kernel command line.
+# $(3): extra arguments for lzma.
+# $(4): name suffix, e.g. "-initramfs".
+# $(5): extra arguments for mkimage.
 define MkuImageLzma
        $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
        $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
@@ -120,6 +249,15 @@ define MkuImageOKLI
 endef
 endif
 
+# $(1): name of the 1st file.
+# $(2): size limit of the 1st file if it is greater than 262144, or
+#       the erase size of the flash if it is greater than zero and less
+#       than 262144
+# $(3): name of the 2nd file.
+# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
+#       it is the size limit of the output file
+# $(5): name of the output file.
+# $(6): padding size.
 define CatFiles
        if [ $(2) -eq 0 ]; then \
                filename="$(3)"; fstype=$$$${filename##*\.}; \
@@ -158,6 +296,11 @@ define CatFiles
        fi; fi
 endef
 
+# $(1): rootfs type.
+# $(2): board name.
+# $(3): kernel image size limit.
+# $(4): rootfs image size limit.
+# $(5): padding argument for padjffs2.
 Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
 Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
 Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
@@ -173,6 +316,14 @@ define ubinize
        ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
 endef
 
+#
+# Embed lzma-compressed kernel inside lzma-loader.
+#
+# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
+# $(2), suffix of target file to build, e.g. bin, gz, elf
+# $(3), kernel command line to pass from lzma-loader to kernel
+# $(4), unused here
+# $(5), suffix of kernel filename, e.g. -initramfs, or empty
 define Image/BuildLoader
        -rm -rf $(KDIR)/lzma-loader
        $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
@@ -182,6 +333,13 @@ define Image/BuildLoader
        -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
 endef
 
+#
+# Build lzma-loader alone which will search for lzma-compressed kernel identified by
+# uImage header with magic "OKLI" at boot time.
+#
+# $(4), offset into the flash space to start searching uImage magic "OKLI".
+# $(5), size of search range starting at $(4).  With 0 as the value, uImage
+#      header is expected to be at precisely $(4)
 define Image/BuildLoaderAlone
        -rm -rf $(KDIR)/lzma-loader
        $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
@@ -206,7 +364,6 @@ ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),17
 ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
 ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
 ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
-carambola2_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
 ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware)
 ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
 ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
@@ -219,13 +376,21 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k
 cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
 cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
 cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
+cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
+eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
+dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
 cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
+esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
+esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
 ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
+ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)
+f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
 dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
 dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
 dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
+hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
 pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
 planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
 ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
@@ -234,14 +399,17 @@ ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware)
 whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
 wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
 wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
-wnr2200_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
+wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
 wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
-wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubiroot),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) ubi.mtd=ubiroot
+wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
+r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
+wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
+zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
+qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
+
 
 define Image/BuildKernel
        cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -252,7 +420,7 @@ define Image/BuildKernel
        $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
        cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
        -mkdir -p $(KDIR_TMP)
-       $(call Image/Build/Profile/$(PROFILE),buildkernel)
+       $(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel)
 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
        cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
        cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
@@ -380,6 +548,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
 Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
 Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
 
+Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
+Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
 Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
 Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
 Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
@@ -435,6 +607,66 @@ Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
 Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
 
 
+Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
+define Image/Build/Belkin
+       $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+       $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
+       $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
+       $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
+       if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+               edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+                       -n "uImage" \
+                       -i $(KDIR_TMP)/vmlinux-$(2).uImage \
+                       -o $(KDIR_TMP)/$(2)-uImage; \
+               edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+                       -n "rootfs" \
+                       -i $(KDIR)/root.$(1) \
+                       -o $(KDIR_TMP)/$(2)-rootfs; \
+               ( \
+                       dd if=$(KDIR_TMP)/$(2)-rootfs; \
+                       dd if=$(KDIR_TMP)/$(2)-uImage; \
+               ) > "$(call factoryname,$(1),$(2))"; \
+       fi
+endef
+
+define Image/Build/EnGenius
+       $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+       $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
+       $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
+       $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
+       if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+               dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+               mksenaofw -e $(call sysupname,$(1),$(2)) \
+                       -o $(call imgname,$(1),$(2))-factory.dlf \
+                       -r 0x101 -p $(7) -t 2; \
+       fi
+endef
+
+Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
+
+define MkuImageHiWiFi
+       # Field ih_name needs to start with "tw150v1"
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
+               -e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(3) $(4)
+endef
+
+define MkuImageLzmaHiWiFi
+       $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
+       $(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
+endef
+
+Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
+Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
+Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
 Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
 
 define Image/Build/PB4X
@@ -492,7 +724,9 @@ define Image/Build/UAPPRO
                -o $(call factoryname,$(1),$(2))
 endef
 
-
+# $(4) = board (XS2, XS5, RS, XM)
+# $(5) = series (BZ, XM, XW)
+# $(6) = chip (ar7240, ar934x)
 define Image/Build/UBNT2
        $(eval fwsize=$(call mtdpartsize,firmware,$(3)))
        $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
@@ -585,13 +819,15 @@ define Image/Build/Seama
        -rm -f $(KDIR_TMP)/image-$(2).tmp
        $(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp)
        [ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \
+               head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \
                $(STAGING_DIR_HOST)/bin/seama \
-               -i $(KDIR_TMP)/image-$(2).tmp \
+               -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \
                -m "dev=/dev/mtdblock/1" -m "type=firmware"; \
                $(STAGING_DIR_HOST)/bin/seama \
                        -s $(call imgname,$(1),$(2))-factory.bin \
                        -m "signature=$(5)" \
-                       -i $(KDIR_TMP)/image-$(2).tmp.seama; \
+                       -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \
+               tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \
        }
        cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp
        $(STAGING_DIR_HOST)/bin/seama \
@@ -608,6 +844,27 @@ define Image/Build/Seama/initramfs
        cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin
 endef
 
+Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
+define Image/Build/Senao
+       mkdir -p $(KDIR_TMP)/$(2)/
+       touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
+       -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
+       dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
+               of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
+       dd if=$(KDIR)/root.$(1) \
+               of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
+       ( \
+               cd $(KDIR_TMP)/$(2)/;  \
+               $(TAR) -cz -f $(call factoryname,$(1),$(2)) * \
+       )
+       -rm -rf $(KDIR_TMP)/$(2)/
+       -sh $(TOPDIR)/scripts/combined-image.sh \
+               $(KDIR_TMP)/vmlinux-$(2).uImage \
+               $(KDIR)/root.$(1) \
+               $(call sysupname,$(1),$(2))
+endef
 
 Image/Build/TPLINKOLD/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2),0x22000,0)
 
@@ -620,11 +877,13 @@ define Image/Build/TPLINKOLD
        ) > $(KDIR_TMP)/kernel-$(2).bin
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION)\
+               -X 0x40000 \
                -k $(KDIR_TMP)/kernel-$(2).bin \
                -r $(KDIR)/root.$(1) \
                -o $(call factoryname,$(1),$(2))
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
+               -X 0x40000 \
                -k $(KDIR_TMP)/kernel-$(2).bin \
                -r $(KDIR)/root.$(1) \
                -o $(call sysupname,$(1),$(2))
@@ -650,12 +909,14 @@ define Image/Build/TPLINK
        ) > $(KDIR_TMP)/kernel-$(2).bin
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION)\
+               -X 0x40000 \
                -k $(KDIR_TMP)/kernel-$(2).bin \
                -r $(KDIR)/root.$(1) \
                -a $(call rootfs_align,$(1)) -j \
                -o $(call factoryname,$(1),$(2))
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
+               -X 0x40000 \
                -k $(KDIR_TMP)/kernel-$(2).bin \
                -r $(KDIR)/root.$(1) \
                -a $(call rootfs_align,$(1)) -j \
@@ -676,12 +937,14 @@ Image/Build/TPLINK-LZMA/buildkernel=$(call PatchKernelLzma,$(2),$(3))
 define Image/Build/TPLINK-LZMA
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) \
+               -X 0x40000 \
                -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma \
                -r $(KDIR)/root.$(1) \
                -a $(call rootfs_align,$(1)) -j \
                -o $(call factoryname,$(1),$(2))
        -$(STAGING_DIR_HOST)/bin/mktplinkfw \
                -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) -s \
+               -X 0x40000 \
                -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma \
                -r $(KDIR)/root.$(1) \
                -a $(call rootfs_align,$(1)) -j \
@@ -697,6 +960,32 @@ define Image/Build/TPLINK-LZMA/initramfs
 endef
 
 
+Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+
+define Image/Build/TPLINK-SAFELOADER
+       -rm -rf $(KDIR)/lzma-loader
+       $(LOADER_MAKE) LOADER=loader-$(2).elf\
+               LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+               LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
+               compile loader.elf
+
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j \
+               -o $(call factoryname,$(1),$(2))
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j -S \
+               -o $(call sysupname,$(1),$(2))
+endef
+
+
 define Image/Build/CyberTAN
        echo -n '' > $(KDIR_TMP)/empty.bin
        $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@@ -756,6 +1045,16 @@ define Image/Build/Netgear
        fi
 endef
 
+
+Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
+Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
+
+define Image/Build/NetgearLzma
+       $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+       $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
+endef
+
+
 Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
 
 # $(1): (empty)
@@ -794,13 +1093,14 @@ endef
 # $(6): Board name (upper caps)
 # $(7): firmware region code (not used yet)
 # $(8): DNI Hardware version
+# $(9): suffix of the configuration file for ubinize
 define Image/Build/NetgearNAND
        $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
        $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
        $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
        $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
        echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
-       $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+       $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
        ( \
                dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
                dd if=$(KDIR_TMP)/$(2)-root.ubi \
@@ -809,6 +1109,8 @@ define Image/Build/NetgearNAND
                -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
                -i $(imageraw) \
                -o $(call imgname,ubi,$(2))-factory.img
+
+       $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
 endef
 
 
@@ -831,6 +1133,39 @@ ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
 endif
 
 
+define Image/Build/ZyXELNAND/buildkernel
+       $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
+       $(call MkuImageLzma,$(2),$(3) $(5) $(6))
+       mkdir -p $(KDIR_TMP)/$(2)/image/boot
+       cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
+       $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+               --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
+               -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
+               -d $(KDIR_TMP)/$(2)/image \
+               2>&1 1>/dev/null | awk '/^.+$$$$/'
+       -rm -rf $(KDIR_TMP)/$(2)
+endef
+
+define Image/Build/ZyXELNAND
+       if [ "$(1)" != "squashfs" ]; then \
+               echo Only squashfs is supported; \
+               return 0; \
+       fi
+       $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+       $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+       $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+       $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
+       $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+       ( \
+               dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+               dd if=$(KDIR_TMP)/$(2)-root.ubi \
+       ) > $(imageraw)
+       dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
+               bs=128k conv=sync
+       $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
+endef
+
+
 Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
 
 define Image/Build/OpenMesh
@@ -862,24 +1197,33 @@ define Image/Build/Zcomax
 endef
 
 
+# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc.
+# $(2): jffs2 blocksize.
 define Jffs2Template
   define Image/Build/Template/$(1)/jffs2-$(2)
-    $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+    $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
   endef
 endef
 
+# $(1): template name to be defined.
+# $(2): squashfs suffix to be used.
+# $(3): jffs2 suffix to be used.
 define BuildTemplate
+  # $(1)     : name of build method.
+  # $(2)     : board name.
+  # $(3)     : kernel command line.
+  # $(4)~$(8): extra arguments.
   define Image/Build/Template/$(1)/initramfs
-    $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+    $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
   endef
   define Image/Build/Template/$(1)/loader
-    $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+    $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
   endef
   define Image/Build/Template/$(1)/buildkernel
-    $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+    $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
   endef
   define Image/Build/Template/$(1)/squashfs
-    $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8))
+    $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
   endef
   $(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
 endef
@@ -896,10 +1240,12 @@ $(eval $(call BuildTemplate,all,,64k 128k 256k))
 ifeq ($(SUBTARGET),generic)
 $(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
 $(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
+$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
 
 $(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
 
 $(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
@@ -907,7 +1253,6 @@ $(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200
 $(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK))
 $(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,CARAMBOLA2,carambola2,CARAMBOLA2,ttyATH0,115200,$$(carambola2_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
 $(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
@@ -919,14 +1264,19 @@ $(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_
 $(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
+$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
 
+$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
+
 $(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
 $(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
 $(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
 
+$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
 $(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
 
 $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
@@ -939,6 +1289,9 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B
 $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
 $(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
 
+$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
+
+$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 
@@ -952,6 +1305,11 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS
 $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
 $(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
 
+$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
+$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
+
+$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
+
 $(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
 $(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
 $(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
@@ -960,21 +1318,18 @@ $(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4
 $(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
 $(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
 
-# This is used with AthGzip profile for now
-$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
-
 $(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,))
+$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
 $(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,))
 $(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
 $(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WNDR3700V1,wndr3700,WNDR3700,ttyS0,115200,$$(wndr3700_mtdlayout),0x33373030,WNDR3700,"" NA,,7 864 320))
-$(eval $(call SingleProfile,Netgear,64kraw,WNDR3700V2,wndr3700v2,WNDR3700,ttyS0,115200,$$(wndr3700v2_mtdlayout),0x33373031,WNDR3700v2,"",-H 29763654+16+64))
-$(eval $(call SingleProfile,Netgear,64kraw,WNDR3800,wndr3800,WNDR3700,ttyS0,115200,$$(wndr3700v2_mtdlayout),0x33373031,WNDR3800,"",-H 29763654+16+128))
-$(eval $(call SingleProfile,Netgear,64kraw,WNDRMAC,wndrmac,WNDR3700,ttyS0,115200,$$(wndr3700v2_mtdlayout),0x33373031,WNDRMAC,"",-H 29763654+16+64))
-$(eval $(call SingleProfile,Netgear,64kraw,WNDRMACV2,wndrmacv2,WNDR3700,ttyS0,115200,$$(wndr3700v2_mtdlayout),0x33373031,WNDRMACv2,"",-H 29763654+16+128))
+$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
+$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
 
 $(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
+$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
 $(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
+$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
 
 $(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
 $(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
@@ -990,12 +1345,17 @@ $(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,
 $(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392))
 $(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,1310720,16187392))
 
+$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,1310720,16121856))
+
+$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
+
 $(eval $(call SingleProfile,TPLINKOLD,squashfs-only,TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
 $(eval $(call SingleProfile,TPLINK,64kraw,RNXN360RT,rnx-n360rt,TL-WR941ND,ttyS0,115200,0x09410002,0x00420001,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,64kraw,TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
+$(eval $(call SingleProfile,TPLINK,64kraw,TLWA701NV1,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
+$(eval $(call SingleProfile,TPLINK,64kraw,TLWA730REV1,tl-wa730rev1,TL-WA901ND,ttyS0,115200,0x07300001,1,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLWA830RV1,tl-wa830re-v1,TL-WA901ND,ttyS0,115200,0x08300010,1,4M))
@@ -1015,7 +1375,13 @@ $(eval $(call SingleProfile,TPLINK,64kraw,TLWR941NV3,tl-wr941nd-v3,TL-WR941ND,tt
 $(eval $(call SingleProfile,TPLINK,64kraw,TLWR941NV4,tl-wr941nd-v4,TL-WR741ND,ttyS0,115200,0x09410004,1,4M))
 $(eval $(call SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
 
-$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7,archer-c7-v1,ARCHER-C7,ttyS0,115200,0x75000001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC5,archer-c5,ARCHER-C5,ttyS0,115200,0xc5000001,1,16Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V1,archer-c7-v1,ARCHER-C7,ttyS0,115200,0x75000001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V2,archer-c7-v2,ARCHER-C7,ttyS0,115200,0xc7000002,1,16Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELM150,el-m150,EL-M150,ttyATH0,115200,0x01500101,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELMINI,el-mini,EL-MINI,ttyATH0,115200,0x01530001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,GLINET6408A,gl-inet-6408A-v1,GL-INET,ttyATH0,115200,0x08000001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,GLINET6416A,gl-inet-6416A-v1,GL-INET,ttyATH0,115200,0x08000001,1,16Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma))
@@ -1025,6 +1391,7 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V1,tl-mr3040-v1,TL-MR3040
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V2,tl-mr3040-v2,TL-MR3040-v2,ttyATH0,115200,0x30400002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3420V2,tl-mr3420-v2,TL-MR3420-v2,ttyS0,115200,0x34200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA701NV2,tl-wa701nd-v2,TL-WA701ND-v2,ttyATH0,115200,0x07010002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR710,tl-wr710n-v1,TL-WR710N,ttyATH0,115200,0x07100001,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR720NV3,tl-wr720n-v3,TL-WR720N-v3,ttyATH0,115200,0x07200103,1,4Mlzma))
@@ -1033,9 +1400,14 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR741NV4,tl-wr741nd-v4,TL-WR741
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA750,tl-wa750re-v1,TL-WA750RE,ttyS0,115200,0x07500001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA830RV2,tl-wa830re-v2,TL-WA830RE-v2,ttyS0,115200,0x08300002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV9,tl-wr841n-v9,TL-WR841N-v9,ttyS0,115200,0x08410009,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR847NV8,tl-wr847n-v8,TL-WR841N-v8,ttyS0,115200,0x08470008,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR842V2,tl-wr842n-v2,TL-WR842N-v2,ttyS0,115200,0x8420002,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR843NV1,tl-wr843nd-v1,TL-WR841N-v8,ttyS0,115200,0x08430001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA801NV2,tl-wa801nd-v2,TL-WA801ND-v2,ttyS0,115200,0x08010002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA850,tl-wa850re-v1,TL-WA850RE,ttyS0,115200,0x08500001,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA860,tl-wa860re-v1,TL-WA860RE,ttyS0,115200,0x08600001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA901NV3,tl-wa901nd-v3,TL-WA901ND-v3,ttyS0,115200,0x09010003,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR941NV6,tl-wr941nd-v6,TL-WDR3500,ttyS0,115200,0x09410006,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1041,tl-wr1041n-v2,TL-WR1041N-v2,ttyS0,115200,0x10410002,1,4Mlzma))
@@ -1044,10 +1416,19 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR3500V1,tl-wdr3500-v1,TL-WDR3500,ttyS0,115200,0x35000001,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR3600V1,tl-wdr3600-v1,TL-WDR4300,ttyS0,115200,0x36000001,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4300V1,tl-wdr4300-v1,TL-WDR4300,ttyS0,115200,0x43000001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4300V1IL,tl-wdr4300-v1-il,TL-WDR4300,ttyS0,115200,0x43008001,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4300,ttyS0,115200,0x43100001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
 
+$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
+
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
+
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
+
 $(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
+$(eval $(call SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-UOP,ttyS0,115200,BZ,BZ,ar7240))
 
 $(eval $(call SingleProfile,UBDEV,64kraw,UBDEV01,ubdev01,UBNT-UF,ttyS0,115200,XM,XM,ar7240))
 
@@ -1062,6 +1443,9 @@ $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTROCKETM,ubnt-rocket-m,UBNT-RM,ttyS
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,115200,XM,XM,ar7240))
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTLOCOXW,ubnt-loco-m-xw,UBNT-LOCO-XW,ttyS0,115200,XM,XW,ar934x))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRGW,ubnt-air-gateway,UBNT-AGW,ttyATH0,115200,XM,AirGW,ar933x))
 
 $(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
 $(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
@@ -1075,6 +1459,7 @@ $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G
 $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
 $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
 $(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
+$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
 
 $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
 $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
@@ -1083,29 +1468,35 @@ $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG
 
 $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
 $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
-$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT))
-$(eval $(call MultiProfile,OPENMESH,OM2P MR600))
+$(eval $(call MultiProfile,ARCHERC7, ARCHERC5 ARCHERC7V1 ARCHERC7V2))
+$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
+$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))
+$(eval $(call MultiProfile,GLINET,GLINET6408A GLINET6416A))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
 $(eval $(call MultiProfile,TLMR11U,TLMR11UV1 TLMR11UV2))
 $(eval $(call MultiProfile,TLMR3040,TLMR3040V1 TLMR3040V2))
 $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
 $(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
+$(eval $(call MultiProfile,TLWA701,TLWA701NV1 TLWA701NV2))
+$(eval $(call MultiProfile,TLWA730RE,TLWA730REV1))
 $(eval $(call MultiProfile,TLWA801,TLWA801NV1 TLWA801NV2))
-$(eval $(call MultiProfile,TLWA830,TLWA830RV1))
+$(eval $(call MultiProfile,TLWA830,TLWA830RV1 TLWA830RV2))
 $(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2 TLWA901NV3))
 $(eval $(call MultiProfile,TLWA7510,TLWA7510NV1))
 $(eval $(call MultiProfile,TLWR720,TLWR720NV3))
 $(eval $(call MultiProfile,TLWR740,TLWR740NV1 TLWR740NV3 TLWR740NV4))
 $(eval $(call MultiProfile,TLWR741,TLWR741NV1 TLWR741NV2 TLWR741NV4))
 $(eval $(call MultiProfile,TLWR743,TLWR743NV1 TLWR743NV2))
-$(eval $(call MultiProfile,TLWR841,TLWR841NV15 TLWR841NV3 TLWR841NV5 TLWR841NV7 TLWR841NV8))
+$(eval $(call MultiProfile,TLWR841,TLWR841NV15 TLWR841NV3 TLWR841NV5 TLWR841NV7 TLWR841NV8 TLWR841NV9 TLWR847NV8))
 $(eval $(call MultiProfile,TLWR842,TLWR842V1 TLWR842V2))
+$(eval $(call MultiProfile,TLWR843,TLWR843NV1))
 $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV6))
 $(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
-$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4310V1 MW4530RV1))
-$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO))
-$(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800 WNDRMAC WNDRMACV2))
+$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
+$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
+$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
 $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
+$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
 $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
 $(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
 
@@ -1114,7 +1505,13 @@ $(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
 endif # ifeq ($(SUBTARGET),generic)
 
 ifeq ($(SUBTARGET),nand)
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
+$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
+
+$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
+
+$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
 endif # ifeq ($(SUBTARGET),nand)
 
 
@@ -1149,6 +1546,7 @@ endif
        $(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
 endef
 
+# $(1): filesystem type.
 define Image/Build
        $(call Image/Build/$(call rootfs_type,$(1)),$(1))
        $(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))