#include <pcicfg.h>
#include <bcmdevs.h>
#include <sbconfig.h>
-#include <bcmutils.h>
#include <sbutils.h>
#include <sbpci.h>
#include <bcmendian.h>
#define PCI_MSG(args) printf args
#else
#define PCI_MSG(args)
-#endif /* BCMDBG_PCI */
+#endif /* BCMDBG_PCI */
/* Can free sbpci_init() memory after boot */
#ifndef linux
/* Emulated configuration space */
typedef struct {
- int n;
- uint size0;
- uint size1;
- uint size2;
- uint size3;
+ int n;
+ uint size0;
+ uint size1;
+ uint size2;
+ uint size3;
} sb_bar_cfg_t;
static pci_config_regs sb_config_regs[SB_MAXCORES];
static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES];
*/
/* Assume one-hot slot wiring */
-#define PCI_SLOT_MAX 16 /* Max. PCI Slots */
+#define PCI_SLOT_MAX 16 /* Max. PCI Slots */
-static uint32
-config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
+static uint32 config_cmd(sb_t * sbh, uint bus, uint dev, uint func, uint off)
{
uint coreidx;
sbpciregs_t *regs;
uint32 win;
/* Slide the PCI window to the appropriate slot */
- win = (SBTOPCI_CFG0 | ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK));
+ win =
+ (SBTOPCI_CFG0 |
+ ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK));
W_REG(osh, ®s->sbtopci1, win);
addr = SB_PCI_CFG |
- ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) |
- (func << PCICFG_FUN_SHIFT) |
- (off & ~3);
+ ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) |
+ (func << PCICFG_FUN_SHIFT) | (off & ~3);
}
} else {
/* Type 1 transaction */
W_REG(osh, ®s->sbtopci1, SBTOPCI_CFG1);
addr = SB_PCI_CFG |
- (bus << PCICFG_BUS_SHIFT) |
- (dev << PCICFG_SLOT_SHIFT) |
- (func << PCICFG_FUN_SHIFT) |
- (off & ~3);
+ (bus << PCICFG_BUS_SHIFT) |
+ (dev << PCICFG_SLOT_SHIFT) |
+ (func << PCICFG_FUN_SHIFT) | (off & ~3);
}
sb_setcoreidx(sbh, coreidx);
* the register address where value in 'val' is read.
*/
static bool
-sb_pcihb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off,
- uint32 **addr, uint32 *val)
+sb_pcihb_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
+ uint32 ** addr, uint32 * val)
{
sbpciregs_t *regs;
osl_t *osh;
/* read pci config when core rev >= 8 */
coreidx = sb_coreidx(sbh);
- regs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) {
- *addr = (uint32 *)®s->pcicfg[func][off >> 2];
+ *addr = (uint32 *) & regs->pcicfg[func][off >> 2];
*val = R_REG(osh, *addr);
ret = TRUE;
}
}
int
-extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+extpci_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
+ void *buf, int len)
{
uint32 addr = 0, *reg = NULL, val;
int ret = 0;
/*
* Set value to -1 when:
- * flag 'pci_disabled' is true;
- * value of 'addr' is zero;
- * REG_MAP() fails;
- * BUSPROBE() fails;
+ * flag 'pci_disabled' is true;
+ * value of 'addr' is zero;
+ * REG_MAP() fails;
+ * BUSPROBE() fails;
*/
if (pci_disabled)
val = 0xffffffff;
else if (bus == 1 && dev == pci_hbslot && func == 0 &&
- sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val))
- ;
+ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ;
else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
- ((reg = (uint32 *)REG_MAP(addr, len)) == 0) ||
- (BUSPROBE(val, reg) != 0))
+ ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
+ (BUSPROBE(val, reg) != 0))
val = 0xffffffff;
PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n",
- __FUNCTION__, val, reg, addr, len, off, buf));
+ __FUNCTION__, val, reg, addr, len, off, buf));
val >>= 8 * (off & 3);
if (len == 4)
}
int
-extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+extpci_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
+ void *buf, int len)
{
osl_t *osh;
uint32 addr = 0, *reg = NULL, val;
/*
* Ignore write attempt when:
- * flag 'pci_disabled' is true;
- * value of 'addr' is zero;
- * REG_MAP() fails;
- * BUSPROBE() fails;
+ * flag 'pci_disabled' is true;
+ * value of 'addr' is zero;
+ * REG_MAP() fails;
+ * BUSPROBE() fails;
*/
if (pci_disabled)
return 0;
else if (bus == 1 && dev == pci_hbslot && func == 0 &&
- sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val))
- ;
+ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ;
else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
- ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
- (BUSPROBE(val, reg) != 0))
+ ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
+ (BUSPROBE(val, reg) != 0))
goto done;
if (len == 4)
W_REG(osh, reg, val);
-done:
+ done:
if (reg && addr)
REG_UNMAP(reg);
/* Sync the emulation registers and the real PCI config registers. */
static void
-sb_pcid_read_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
- uint off, uint len)
+sb_pcid_read_config(sb_t * sbh, uint coreidx, sb_pci_cfg_t * cfg,
+ uint off, uint len)
{
osl_t *osh;
uint oldidx;
sb_setcoreidx(sbh, coreidx);
if (sb_iscoreup(sbh)) {
if (len == 4)
- *(uint32 *)((ulong)cfg->emu + off) =
- htol32(R_REG(osh, (uint32 *)((ulong)cfg->pci + off)));
+ *(uint32 *) ((ulong) cfg->emu + off) =
+ htol32(R_REG
+ (osh, (uint32 *) ((ulong) cfg->pci + off)));
else if (len == 2)
- *(uint16 *)((ulong)cfg->emu + off) =
- htol16(R_REG(osh, (uint16 *)((ulong)cfg->pci + off)));
+ *(uint16 *) ((ulong) cfg->emu + off) =
+ htol16(R_REG
+ (osh, (uint16 *) ((ulong) cfg->pci + off)));
else if (len == 1)
- *(uint8 *)((ulong)cfg->emu + off) =
- R_REG(osh, (uint8 *)((ulong)cfg->pci + off));
+ *(uint8 *) ((ulong) cfg->emu + off) =
+ R_REG(osh, (uint8 *) ((ulong) cfg->pci + off));
}
sb_setcoreidx(sbh, oldidx);
}
static void
-sb_pcid_write_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg,
- uint off, uint len)
+sb_pcid_write_config(sb_t * sbh, uint coreidx, sb_pci_cfg_t * cfg,
+ uint off, uint len)
{
osl_t *osh;
uint oldidx;
sb_setcoreidx(sbh, coreidx);
if (sb_iscoreup(sbh)) {
if (len == 4)
- W_REG(osh, (uint32 *)((ulong)cfg->pci + off),
- ltoh32(*(uint32 *)((ulong)cfg->emu + off)));
+ W_REG(osh, (uint32 *) ((ulong) cfg->pci + off),
+ ltoh32(*(uint32 *) ((ulong) cfg->emu + off)));
else if (len == 2)
- W_REG(osh, (uint16 *)((ulong)cfg->pci + off),
- ltoh16(*(uint16 *)((ulong)cfg->emu + off)));
+ W_REG(osh, (uint16 *) ((ulong) cfg->pci + off),
+ ltoh16(*(uint16 *) ((ulong) cfg->emu + off)));
else if (len == 1)
- W_REG(osh, (uint8 *)((ulong)cfg->pci + off),
- *(uint8 *)((ulong)cfg->emu + off));
+ W_REG(osh, (uint8 *) ((ulong) cfg->pci + off),
+ *(uint8 *) ((ulong) cfg->emu + off));
}
sb_setcoreidx(sbh, oldidx);
}
* Functions for accessing translated SB configuration space
*/
static int
-sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+sb_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off, void *buf,
+ int len)
{
pci_config_regs *cfg;
- if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
+ if (dev >= SB_MAXCORES || func >= MAXFUNCS
+ || (off + len) > sizeof(pci_config_regs))
return -1;
cfg = sb_pci_cfg[dev][func].emu;
ASSERT(ISALIGNED(off, len));
- ASSERT(ISALIGNED((uintptr)buf, len));
+ ASSERT(ISALIGNED((uintptr) buf, len));
/* use special config space if the device does not exist */
if (!cfg)
sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
if (len == 4)
- *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
+ *((uint32 *) buf) = ltoh32(*((uint32 *) ((ulong) cfg + off)));
else if (len == 2)
- *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
+ *((uint16 *) buf) = ltoh16(*((uint16 *) ((ulong) cfg + off)));
else if (len == 1)
- *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
+ *((uint8 *) buf) = *((uint8 *) ((ulong) cfg + off));
else
return -1;
}
static int
-sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+sb_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off, void *buf,
+ int len)
{
uint coreidx;
void *regs;
osl_t *osh;
sb_bar_cfg_t *bar;
- if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs))
+ if (dev >= SB_MAXCORES || func >= MAXFUNCS
+ || (off + len) > sizeof(pci_config_regs))
return -1;
cfg = sb_pci_cfg[dev][func].emu;
if (!cfg)
return -1;
ASSERT(ISALIGNED(off, len));
- ASSERT(ISALIGNED((uintptr)buf, len));
+ ASSERT(ISALIGNED((uintptr) buf, len));
osh = sb_osh(sbh);
/* Highest numbered address match register */
if (off == OFFSETOF(pci_config_regs, base[0]))
cfg->base[0] = ~(bar->size0 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[1]) && bar->n >= 1)
+ else if (off == OFFSETOF(pci_config_regs, base[1])
+ && bar->n >= 1)
cfg->base[1] = ~(bar->size1 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[2]) && bar->n >= 2)
+ else if (off == OFFSETOF(pci_config_regs, base[2])
+ && bar->n >= 2)
cfg->base[2] = ~(bar->size2 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[3]) && bar->n >= 3)
+ else if (off == OFFSETOF(pci_config_regs, base[3])
+ && bar->n >= 3)
cfg->base[3] = ~(bar->size3 - 1);
}
sb_setcoreidx(sbh, coreidx);
- }
- else if (len == 4)
- *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
+ } else if (len == 4)
+ *((uint32 *) ((ulong) cfg + off)) = htol32(*((uint32 *) buf));
else if (len == 2)
- *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
+ *((uint16 *) ((ulong) cfg + off)) = htol16(*((uint16 *) buf));
else if (len == 1)
- *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
+ *((uint8 *) ((ulong) cfg + off)) = *((uint8 *) buf);
else
return -1;
/* sync emulation with real PCI config if necessary */
if (sb_pci_cfg[dev][func].pci)
- sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
+ sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off,
+ len);
return 0;
}
int
-sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+sbpci_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
+ void *buf, int len)
{
if (bus == 0)
return sb_read_config(sbh, bus, dev, func, off, buf, len);
}
int
-sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+sbpci_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
+ void *buf, int len)
{
if (bus == 0)
return sb_write_config(sbh, bus, dev, func, off, buf, len);
return extpci_write_config(sbh, bus, dev, func, off, buf, len);
}
-void
-sbpci_ban(uint16 core)
+void sbpci_ban(uint16 core)
{
if (pci_banned < ARRAYSIZE(pci_ban))
pci_ban[pci_banned++] = core;
* Otherwise return -1 to indicate there is no PCI core and return 1
* to indicate PCI core is disabled.
*/
-int __init
-sbpci_init_pci(sb_t *sbh)
+int __init sbpci_init_pci(sb_t * sbh)
{
uint chip, chiprev, chippkg, host;
uint32 boardflags;
if ((chip == 0x4310) && (chiprev == 0))
pci_disabled = TRUE;
-
- sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
+
+ sb = (sbconfig_t *) ((ulong) pci + SBCONFIGOFF);
boardflags = (uint32) getintvar(NULL, "boardflags");
*/
if (((chip == BCM4712_CHIP_ID) &&
((chippkg == BCM4712SMALL_PKG_ID) ||
- (chippkg == BCM4712MID_PKG_ID))) ||
- (boardflags & BFL_NOPCI))
+ (chippkg == BCM4712MID_PKG_ID))) || (boardflags & BFL_NOPCI))
pci_disabled = TRUE;
/* Enable the core */
}
/* Reset the external PCI bus and enable the clock */
- W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */
- W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */
- OSL_DELAY(150); /* delay > 100 us */
- W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */
+ W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */
+ W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */
+ OSL_DELAY(150); /* delay > 100 us */
+ W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */
/* Use internal arbiter and park REQ/GRNT at external master 0 */
W_REG(osh, &pci->arbcontrol, PCI_INT_ARB);
- OSL_DELAY(1); /* delay 1 us */
+ OSL_DELAY(1); /* delay 1 us */
if (sb_corerev(sbh) >= 8) {
val = getintvar(NULL, "parkid");
ASSERT(val <= PCI_PARKID_LAST);
/* GPIO 1 resets the CardBus device on bcm94710ap */
sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
- W_REG(osh, &pci->sprom[0], R_REG(osh, &pci->sprom[0]) | 0x400);
+ W_REG(osh, &pci->sprom[0],
+ R_REG(osh, &pci->sprom[0]) | 0x400);
}
/* 64 MB I/O access window */
/* Host bridge slot # nvram overwrite */
if ((hbslot = nvram_get("pcihbslot"))) {
- pci_hbslot = bcm_strtoul(hbslot, NULL, 0);
+ pci_hbslot = simple_strtoul(hbslot, NULL, 0);
ASSERT(pci_hbslot < PCI_MAX_DEVICES);
}
/* Enable PCI bridge BAR0 prefetch and burst */
val = 6;
- sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val, sizeof(val));
+ sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val,
+ sizeof(val));
/* Enable PCI interrupts */
W_REG(osh, &pci->intmask, PCI_INTA);
* Get the PCI region address and size information.
*/
static void __init
-sbpci_init_regions(sb_t *sbh, uint func, pci_config_regs *cfg, sb_bar_cfg_t *bar)
+sbpci_init_regions(sb_t * sbh, uint func, pci_config_regs * cfg,
+ sb_bar_cfg_t * bar)
{
osl_t *osh;
uint16 coreid;
sbconfig_t *sb;
uint32 base;
- osh = sb_osh(sbh);
- coreid = sb_coreid(sbh);
- regs = sb_coreregs(sbh);
- sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+ osh = sb_osh(sbh);
+ coreid = sb_coreid(sbh);
+ regs = sb_coreregs(sbh);
+ sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
switch (coreid) {
case SB_USB20H:
base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
- cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */
+ cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */
cfg->base[1] = 0;
cfg->base[2] = 0;
cfg->base[3] = 0;
cfg->base[4] = 0;
cfg->base[5] = 0;
- bar->n = 1;
- bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */
- bar->size1 = 0;
- bar->size2 = 0;
- bar->size3 = 0;
+ bar->n = 1;
+ bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */
+ bar->size1 = 0;
+ bar->size2 = 0;
+ bar->size3 = 0;
break;
default:
cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3)));
cfg->base[4] = 0;
cfg->base[5] = 0;
- bar->n = (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
- bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0));
- bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1));
- bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2));
- bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3));
+ bar->n =
+ (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >>
+ SBIDL_AR_SHIFT;
+ bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0));
+ bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1));
+ bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2));
+ bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3));
break;
}
}
* Construct PCI config spaces for SB cores so that they
* can be accessed as if they were PCI devices.
*/
-static void __init
-sbpci_init_cores(sb_t *sbh)
+static void __init sbpci_init_cores(sb_t * sbh)
{
uint chiprev, coreidx, i;
sbconfig_t *sb;
memset(&sb_pci_null, -1, sizeof(sb_pci_null));
cfg = sb_config_regs;
bar = sb_bar_cfg;
- for (dev = 0; dev < SB_MAXCORES; dev ++) {
+ for (dev = 0; dev < SB_MAXCORES; dev++) {
/* Check if the core exists */
if (!(regs = sb_setcoreidx(sbh, dev)))
continue;
- sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+ sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
/* Check if this core is banned */
coreid = sb_coreid(sbh);
}
/* Convert core id to pci id */
- if (sb_corepciid(sbh, func, &vendor, &device, &class, &subclass,
- &progif, &header))
+ if (sb_corepciid
+ (sbh, func, &vendor, &device, &class, &subclass,
+ &progif, &header))
continue;
/*
*/
switch (device) {
case BCM47XX_GIGETH_ID:
- pci = (pci_config_regs *)((uint32)regs + 0x800);
+ pci =
+ (pci_config_regs *) ((uint32) regs + 0x800);
break;
case BCM47XX_SATAXOR_ID:
- pci = (pci_config_regs *)((uint32)regs + 0x400);
+ pci =
+ (pci_config_regs *) ((uint32) regs + 0x400);
break;
case BCM47XX_ATA100_ID:
- pci = (pci_config_regs *)((uint32)regs + 0x800);
+ pci =
+ (pci_config_regs *) ((uint32) regs + 0x800);
break;
default:
pci = NULL;
cfg->header_type = header;
sbpci_init_regions(sbh, func, cfg, bar);
/* Save core interrupt flag */
- cfg->int_pin = R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+ cfg->int_pin =
+ R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
/* Save core interrupt assignment */
cfg->int_line = sb_irq(sbh);
/* Indicate there is no SROM */
- *((uint32 *) &cfg->sprom_control) = 0xffffffff;
+ *((uint32 *) & cfg->sprom_control) = 0xffffffff;
/* Point to the PCI config spaces */
sb_pci_cfg[dev][func].emu = cfg;
sb_pci_cfg[dev][func].pci = pci;
sb_pci_cfg[dev][func].bar = bar;
- cfg ++;
- bar ++;
+ cfg++;
+ bar++;
}
}
-done:
+ done:
sb_setcoreidx(sbh, coreidx);
}
* Must propagate sbpci_init_pci() return value to the caller to let
* them know the PCI core initialization status.
*/
-int __init
-sbpci_init(sb_t *sbh)
+int __init sbpci_init(sb_t * sbh)
{
int status = sbpci_init_pci(sbh);
sbpci_init_cores(sbh);
return status;
}
-
projects / openwrt / svn-archive / archive.git / blobdiff