include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-LOADADDR = 0x8108c8f4 # RAM start + 16M
-KERNEL_ENTRY = 0x80100000 # Default kernel entry in arch/mips/Makefile
+LOADADDR = 0x80010000 # RAM start + 16M
+KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
RAMSIZE = 0x01000000 # 64MB
LOADER_MAKEOPTS= \
-a 1024
endef
+define Image/Build/CFE
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
+ -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+ -t $(4) -d "$(5)" $(7)
+# -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
+
+endef
+
+define Image/Build/CFEAGPF
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
+ -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+ -v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
+endef
+
+define Image/Build/RedBoot
+ cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
+ gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
+ $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
+ dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
+ dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
+endef
+
+define Image/Build/CFEOLD
+ $(TOPDIR)/scripts/brcmImage.pl -t -p \
+ -b $(2) -c $(3) \
+ -k $(KDIR)/vmlinux.lzma.cfe \
+ -r $(KDIR)/root.$(1) \
+ -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
+endef
+
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
+ # Standard LZMA kernel
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+
+ # CFE is a LZMA nazi! It took me hours to find out the parameters!
+ # Also I think lzma has a bug cause it generates different output depending on
+ # if you use stdin / stdout or not. Use files instead of stdio here, cause
+ # otherwise CFE will complain and not boot the image.
+ $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+
+ # Strip out the length, CFE doesn't like this
+ dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
+ dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+ rm -f $(KDIR)/vmlinux.lzma.tmp
+
+ # Build the LZMA loader
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
+
echo -ne "\\x00" >> $(KDIR)/loader.gz
+ rm -f $(KDIR)/fs_mark
+ touch $(KDIR)/fs_mark
+ $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
define Image/Build
- $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
+ $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
+ # Various routers
+ $(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe,)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,bc221,,bc221,-y 5)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300,)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(REVISION),bc310,)
+ $(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bcfe,)
+ $(call Image/Build/CFE,$(1),96348GW,6348,bc221,,bc221,-y 5)
+ # BT Voyager V210_BTR
+ $(call Image/Build/CFE,$(1),V210_BB,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V210_ROI, V210_WB
+ $(call Image/Build/CFE,$(1),V210,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V2091_BTR
+ $(call Image/Build/CFE,$(1),V2091_BB,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V2091_ROI, V2091_WB
+ $(call Image/Build/CFE,$(1),V2091,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V220V, V220V_MGCP_BTR
+ $(call Image/Build/CFE,$(1),RTA1052V,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V2110, V2110_AA, V2110_ROI
+ $(call Image/Build/CFE,$(1),V2110,6348,bc221,,btvgr,-y 5)
+ # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
+ $(call Image/Build/CFE,$(1),V2500V_BB,6348,bc221,,btvgr,-y 5)
+ # Tecom GW6000
+ $(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300,)
+ # Tecom GW6200
+ $(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
+ # Neufbox4
+ $(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
+ $(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(REVISION),nb4)
+ # Comtrend 536, 5621
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
+ # TP-Link 8900GB
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,bc310,$(shell printf 'PRID\x89\x10\x00\x02'),td8900GB)
+ # Davolink DV201AMR
+ $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
+ # USR 9108
+ $(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
+ $(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
+ # NetGear DG834GT, DG834PN
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
+ # Belkin f5d7633
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,bc310,,bc310)
+ # D-Link DSL-2640B
+ $(call Image/Build/CFE,$(1),D-4P-W,6348,bc310,,bc310)
+
+ # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
+ $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bc300,,bc300)
+
+ # Sagem F@ST2404
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(REVISION),bc310)
+ # Inventel Livebox
+ $(call Image/Build/RedBoot,livebox)
+ # D-Link DSL-2740B
+ $(call Image/Build/CFE,$(1),96358GW,6358,bc310,,dsl2740b)
+ # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
endef
$(eval $(call BuildImage))
projects / openwrt / svn-archive / archive.git / blobdiff